2016 CITROEN DS3 CABRIO DAG lock

Braking assistance systems
Group of supplementary systems which help you   to   obtain   optimum   braking   in   complete  
s

afety   in   emergency   situations:
-
 
a
nti-lock   braking   system   (ABS),
-
 
e
lectronic   brake   force   distribution   (EBFD),
-
 
e
mergency   braking   assistance   (EBA).Anti-lock braking system
and electronic brake force
distribution
Linked systems which improve the stability and manoeuvrability   of   your   vehicle   when   braking,  
i

n   particular   on   poor   or   slippery   sur faces.
Activation
The anti-lock braking system comes into operation   automatically   when   there   is   a   risk   of  
w

heel   lock.
Normal
  operation   of   the   ABS   may   make   itself  
f

elt   by   slight   vibration   of   the   brake   pedal.
When
  braking   in   an   emergency,   press  
v

ery   firmly   without   releasing   the  
p

ressure.
Operating fault
If this warning lamp comes on, together   with   the   STOP and ABS
warning
  lamps,   accompanied   by   an  
a

udible
 
signal   and   a   message   in   the   screen,   it  
i

ndicates
 
a   malfunction   of   the   electronic   brake  
f

orce distribution which could result in loss of
control
 
of
  the   vehicle   when   braking.
You must stop as soon as it is safe to do so.
When
  replacing   wheels   (tyres   and  
r

ims),   ensure   that   they   conform   to   the  
ma

nufacturer's
 r
ecommendations.
If
  this   warning   lamp   comes   on,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   screen,   it  
i

ndicates
 
a   malfunction   of   the   anti-lock   braking  
s

ystem
 
which   could   result   in   loss   of   control   of  
t

he
 
vehicle   when   braking.
In either case, contact a CITROËN dealer or a
qualified
 w
orkshop.

177
DS3_en_Chap07_securite-enfants_ed01-2015
Advice on child seats
The incorrect installation of a child seat in a
vehicle  compromises   the   child's   protection  
i

n   the   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild seat harness keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
To
  install   a   child   seat   using   the   vehicle's  
s

eat belt, ensure that the belt is well
tightened
  on   the   child   seat   and   that   it   holds  
t

he   child   seat   firmly   against   the   vehicle's  
s

eat.   If   your   passenger   seat   is   adjustable,  
m

ove   it   for ward   if   necessary.
On
  the   rear   seats,   always   leave   enough  
s

pace   between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   child's   feet   when   in   a   for ward   facing  
c

hild   seat.
To
  do   this,   move   the   front   seat   for ward   and,  
i

f   necessary,   also   straighten   its   backrest.
Children at the front
The legislation on carrying a child on the front   passenger   seat   is   specific   to   each  
c

o unt r y.
Refer
  to   the   current   legislation   in   your  
c

o unt r y.
Deactivate
  the   passenger's   front   airbag  
w

hen   a   rear ward   facing   child   seat   is  
i

nstalled   on   the   front   seat.   Other wise   the  
c

hild   risks   being   seriously   injured   or   killed   if  
t

he   airbag   is   deployed.
Installation of a booster cushion
The chest part of the seat belt must be positioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes
  correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a  
b

ooster   seat   which   has   a   back,   fitted   with   a  
s

eat   belt   guide   at   shoulder   level.
As
  a   safety   precaution,   do   not   leave:
-
 
o
ne   or   more   children   alone   and  
u

nsupervised in a vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
k
eys   within   the   reach   of   children   inside  
t

he   vehicle.
Use
  the   child   lock   to   prevent   any   accidental  
o

pening   of   the   rear   doors   or   windows.
Avoid
  opening   the   rear   windows   by   more  
t

han   a   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
For
 
optimum
 
installation
 
of
 
a
 
for ward
 
facing
 c
hild
 
seat,
 
ensure
 
that
 
the
 
back
 
of
 
the
 
child
 s
eat
 
is
 
as
 
close
 
as
 
possible
 
to
 
the
 
back
 
of
 
t

he
 
vehicle's
 
seat,
 
in
 
contact
 
if
 
possible.
You
 
must
 
remove
 
the
 
head
 
restraint
 
before
 
f

itting
 
a
 
child
 
seat
 
on
 
a
 
passenger
 
seat.
 
E

nsure that the head restraint is stowed or
attached
 
securely
 
to
 
prevent
 
it
 
from
 
being
 
t

hrown around the vehicle in the event of
sharp
 
braking.
 
Refit
 
the
 
head
 
restraint
 
once
 
t

he
 
child
 
seat
 
has
 
been
 
removed.
Child safety

193
DS3_en_Chap08_info-pratiques_ed01-2015
Never store bottles of AdBlue® in
your vehicle.
AdBlue
® freezes at about -11°C and d
eteriorates   above   25°C.   It   is   recommended  
t

hat bottles be stored in a cool area and
protected
  from   direct   sunlight.
Under these conditions, the additive can be
kept
 
for
 
at   least   a   year.
If the additive has frozen, it can be used once it
has
 
completely   thawed   out.
Recommendations on storage
Before topping-up, ensure that the vehicle is parked   on   a   flat   and   level   sur face.
In wintry conditions, ensure that the
temperature
  of   the   vehicle   is   above   -11°C.  
O

ther wise,   by   freezing,   the   AdBlue
® cannot
be
 
poured
 
into
 
its
 
tank.
 
Park
 
your
 
vehicle   in   a  
w

armer
 
area
 
for
 
a
 
few
 
hours
 
to
 
allow   the   top-up  
t

o
 
be
 
carried
 
out.
Procedure
F Switch   off   the   ignition   and   remove   the   key.
F
F
or access to the AdBlue
® tank, raise the b
oot
 
carpet
 
then,
 
depending   on   equipment,  
l

ift
 
out
 
the
 
spare
 
wheel
 
and/or   the   storage  
b

ox.
F
 
W

ithout
 
pressing,
 
turn
 
the
  black   cap   a  
q

uarter
 
turn
 
anti-clockwise   and   lift   it   off.
F

T

urn the blue cap a 6
th of a turn anti-
clockwise.
F
 
L

ift
 
off
 
the
 
cap.
Practical information

DS3_en_Chap08_info-pratiques_ed01-2015
Important:   if   your   vehicle's  Ad
Blue® tank is completely empty - w
hich
 
is
  confirmed   by   the   alert  
m

essages   and   the   impossibility   of  
s

tarting
 
the   engine,   you   must   add   at  
l

east
 
3.8   litres   (so   two   1.89   litre   bottles).If any additive is split or splashed, wash
immediately
  with   cold   water   or   wipe  
w

ith   a   damp   cloth.
If the additive has crystallised, clean it
off   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up after
a breakdown because of a lack of
additive ,   signalled   by   the   message   "Top
 u

p   emissions   additive:   Starting   prevented",
 y

ou   must   wait   around   5   minutes   before
 s

witching  
o
n  
t
he  
i
gnition,  
w
ithout opening
the driver's door, locking the vehicle
or introducing the key into the ignition
switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
F

O

btain a bottle of AdBlue
®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank. N ever dispose of AdBlue
® additive
bottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 
purpose
 
or
 
take
 
them
  to   your  
d

ealer.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth.
F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 
it
 
a


6
th of a turn clockwise, to its stop.
F
 R
efit   the   black   cap   and   turn   it   a   quarter   of  
a

 
turn   clockwise   without   pressing.   Ensure  
t

hat the indicator on the cap lines up with
the
 
indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel   and/or   the   storage   box   to   the   bottom  
o

f
 
the   boot.
F
 
R

efit   the   boot   carpet   and   close   the   tailgate.

203
DS3_en_Chap08_info-pratiques_ed01-2015
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not   block   traffic:   the   ground   must   be  
l

evel,   stable   and   not   slippery.
Apply
  the   parking   brake,   switch   off   the  
i

gnition   and   engage   first   gear*   to   lock  
t

he   wheels.
If
  necessary,   place   a   chock   under   the  
w

heel   diagonally   opposite   the   wheel   to  
be c

hanged.
It
  is   imperative   that   you   ensure   that   the  
o

ccupants   get   out   of   the   vehicle   and  
w

ait   where   they   are   safe.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   chromed   bolt   cover   from   each  o
f   the   bolts   using   the   tool   3   (alloy   wheels  
o

nly).
F
 
F
it   the   socket   4 on the wheelbrace 1 to
slacken
  the   security   bolt   (if   your   vehicle   is  
f

itted   with   them).
F
 
S
lacken   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
*


position R
 
for
 
an
 
electronic
 
gearbox,
 
P for an
automatic
 
gearbox.
Ensure
 
that
 
the
 
jack
 
is
 
stable.
 
If
 
the
 g
round
 
is
 
slippery
 
or
 
loose,
 
the
 
jack
 
c

ould
 
slip
 
or
 
drop
 
-
 
Risk
 
of
 
injury!
Take
 
care
 
to
 
position
 
the
 
jack
 
only
 
at
 
o

ne
 
of
 
the
 
jacking
 
points
 
A or B

under
the
 
vehicle,
 
ensuring
 
that
 
the
 
vehicle's
 
c

ontact area is well centred on the
head
 
of
 
the
 
jack.
 
Other wise,
 
there
 
is
 
a
 
r

isk
 
of
 
damage
 
to
 
the
 
vehicle
 
and/or
 
the
 
j

ack
 
might
 
drop
 
-
 
Risk
 
of
 
injury!
Practical information

DS3_en_Chap08_info-pratiques_ed01-2015
Fuse n°R ating Functions
F8 20 AMultifunction
  screen,   audio   system,   navigation   radio,   alarm  
c

ontrol   unit,   alarm   siren.
F9 30 A12
  V   socket,   portable   navigation   support   supply.
F10 15 ASteering
  mounted   controls.
F11 15 AIgnition,
  diagnostic   socket,   automatic   gearbox   control   unit.
F12 15 ARain
  /   sunshine   sensor,   trailer   relay   unit.
F13 5 AMain
  stop   switch,   engine   relay   unit.
F14 15 AParking
  sensors   control   unit,   airbag   control   unit,   instrument  
p

anel,   digital   air   conditioning,   USB   Box,   Hi-Fi   amplifier.
F15 30 ALocking.
F16 -Not
  used.
F17 40 ARear
  screen   and   door   mirrors   demisting/defrosting.
SH -PARC
  shunt.

DS3_en_Chap08_info-pratiques_ed01-2015
Towing the vehicleProcedure for having your vehicle towed or for towing another vehicle using a removable towing eye.
T he   towing   eye   is   installed   in   the   boot   under  
t

he   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F

r
aise the floor,
F
 
r
emove   the   polystyrene   storage   box,
F
 
r
emove   the   towing   eye   from   the   holder.
Access to the tools
ge
neral recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving   licence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing  
a

rm;   rope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for  
b

raking   or   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
f

our-wheel drive vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release  
t

he   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...

229
DS3_en_Chap08_info-pratiques_ed01-2015
F On  the   front   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   arm.
F
 
P
lace   the   gear   lever   in   neutral   (position  n
for
  an   electronic   or   automatic   gearbox). F
 O n   the   rear   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   arm.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Towing your vehicleTowing another vehicle
Failure to observe this special
condition   could   result   in   damage  
t

o   certain   components   (braking,  
t

ransmission..)   and   the   absence   of  
b

raking   assistance   the   next   time  
t

he   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key   one  
n

otch   in   the   ignition   switch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Practical information