2016 CITROEN DS3 CABRIO DAG steering

109
DS3_en_Chap04_conduite_ed01-2015
The gear change requests are only carried out if   the   engine   speed   permits.
It is not necessary to release the accelerator
pedal
  during   gear   changes.
When
  braking   or   slowing   down,   the   gearbox  
c

hanges   down   automatically   so   that   the   vehicle  
p

icks   up   in   the   right   gear.
Under
  full   acceleration,   the   change   up   will   not  
t

ake   place   unless   the   driver   operates   the   gear  
s

elector   or   steering   mounted   control   paddle  
(

unless   the   engine   is   close   to   its   maximum  
s

peed).
Reverse
To engage reverse, the vehicle must be immobilised   with   your   foot   on   the   brake.
F

Sel
ect position R .
Stopping the vehicle
Before switching off the engine:
-  c hange   to   position  n to be in neutral,


or
-
 
l
eave   the   vehicle   in   gear;   in   this   case   the  
v

ehicle   cannot   be   moved.
Manual mode
F Select position M.
The   gears   engaged   appear   in  
s

uccession   in   the   instrument   panel.
You
  can   change   mode   at   any   time   by  
m

oving   the   gear   selector   from   A to M or
the
  other   way   round.
Never
  select   neutral   (position  n
)
  when  
m

oving. There
  is   an   audible   signal   on  
enga

gement
 o
f
 r
everse.For
  all   parking   situations,   you   must
apply the parking brake
 

to   immobilise  
t

he   vehicle.
When
  immobilising   the   vehicle   with   the  
e

ngine   running,   you   must   put   the   gear  
s

elector   into   the   neutral   (position  n
).
B

efore   doing   anything   under   the  
b

onnet,   ensure   that   the   gear   selector  
i

s   in   neutral   (position  n
)
  and   that   the  
p

arking   brake   is   applied.
At
  low   speed,   if   reverse   gear   is   requested,  
t

he n  warning   lamp   flashes   and   the   gearbox  
g

oes   into   neutral   automatically.
To
  engage   reverse,   put   the   gear   selector   into  
p

osition n
, t
hen to position R.
driving

DS3_en_Chap04_conduite_ed01-2015
Stop & StartThe Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Per fect
  for   urban   use,   the   Stop   &   Start   system   reduces   fuel   consumption   and   exhaust   emissions   as   well   as   the   noise   level   when   stationary.
Operation
going into engine STOP mode
For your comfort, during parking manoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   key.
The "ECO" 
warning
 
lamp
 
comes
 o
n
 
in
 
the
 
instrument
 
panel
 
and
 
the
 
e

ngine
 
goes
 
into
 
standby:
-

w

ith a manual gearbox , at speeds below
12
 
mph
 
(20
 
km/h),
 
when
 
you
 
put
 
the
 
gear
 
l

ever into neutral, and you release the
clutch
 
pedal.
-

w

ith a 5 or 6-speed electronic gearbox ,
when
 
stationary
 
or
 
at
 
speeds
 
below
 
5
 
mph
 
(

8
 
km/h)
 
(depending
 
on
 
version),
 
when
 
y

ou
 
press
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear
 
s

elector in position
n
.
A

 
time
 
counter
 
calculates
 
the
 
sum
 o

f
 
the
 
periods
 
in
 
STOP
 
mode
 
during
 a

 
journey.
 
It
 
rests
 
itself
 
to
 
zero
 
every
 t

ime
 
the
 
ignition
 
is
 
switched
 
on
 
with
 t

he
 
key. STOP
  mode   is   not   invoked   when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   key,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
Special cases: STOP mode not
available
The "ECO" warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.

DS3_en_Chap04_conduite_ed01-2015
System which prevents the vehicle from exceeding   the   speed   programmed   by   the  
d

river.
When
  the   programmed   speed   limit   is   reached,  
p

ressing   the   accelerator   pedal   in   the   normal  
m

anner   no   longer   has   any   effect.
The
  speed   limiter   is   switched on
 m
anually:
 it r

equires   a   programmed   speed   of   at   least  
20
  mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly.
To
  return   to   the   programmed   speed,   simply  
s

low   down   to   a   speed   below   the   programmed  
s

peed.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
Speed limiter
The speed limiter cannot, in any circumstances,   replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A
.
1.
 S
peed   limiter   mode   selection   thumb   wheel.
2.
 V
alue   decrease   button.
3.
 V
alue   increase   button.
4.
 S
peed   limiter   on   /   off   button.
Steering mounted controls
The programmed information is grouped t
ogether   in   the   instrument   panel   screen.
5.
 S

peed   limiter   on   /   off   indication.
6.
 S

peed   limiter   mode   selection   indication.
7.
 P

rogrammed   speed   value.
displays in the instrument panel

DS3_en_Chap04_conduite_ed01-2015
Cruise control
System which automatically maintains the speed   of   the   vehicle   at   the   value   programmed  
b

y the driver, without any action on the
accelerator
 ped

al.
The cruise control is switched on
 m

anually:
 it r

equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   on   a   manual   gearbox,
-
 
s
econd   gear   on   a   or   automatic   or   electronic  
g

earbox,   in   sequential   mode,
-
position A
  on   an   electronic   gearbox   or  
p

osition d  on   an   automatic   gearbox.
The cruise control is switched off
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value. The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A.
1.
 C

ruise   control   mode   selection   thumb   wheel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 C

ruise   control   off/resume   button.Steering mounted controls
The cruise control cannot, in any
circumstances,  replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  programmed   information   is   grouped  
t

ogether   in   the   instrument   panel   screen.
5.
  C
ruise   control   off/resume   indication.
6.
  C
ruise   control   mode   selection   indication.
7.
  P
rogrammed   speed   value.
displays in the instrument panel

145
DS3_en_Chap06_securite_ed01-2015
Horn
Audible warning to alert other road users to an imminent d anger.
F
 
P
ress   one   of   the   spokes   of   the   steering  
w

heel.
Emergency o r 
a

ssistance call
This system allows you to make an emergency o
r   assistance   call   to   the   emergency   services  
o

r   to   the   dedicated   service   (operated   by  
C

ITROËN   Assistance).
For
  more   information   on   the   use   of   this  
f

unction,   refer   to   the   "Audio   and   telematics"  
s

ection.
Safety

147
DS3_en_Chap06_securite_ed01-2015
The alert is maintained until the system is r einitialised.
The loss of pressure detected does not
always
 
cause
 
visible
 
bulging
 
of
 
the
 
tyre.
 
D

o
 
not
 
satisfy
 
yourself
 
with
 
just
 
a
 
visual
 
c

heck. Before
  reinitialising   the   system,   ensure  
t

hat the pressures of the four tyres are
correct for the use of the vehicle, as
given
  on   the   tyre   pressure   label.
The
  under-inflation   detection   system  
d

oes   not   give   a   warning   if   a   pressure   is  
i

ncorrect   at   the   time   of   reinitialisation.
Under-inflation alert
This is given by fixed illumination of this   warning   lamp,   accompanied   by  
a

n   audible   signal   and   the   display   of   a  
m

essage.
F
 
R

educe   speed   immediately,   avoid  
e

xcessive   steering   movements   and   sudden  
b

raking
F
 
S

top
 
the   vehicle   as   soon   as   it   is   safe   to   do   so.F
 I f   you   have   a   compressor   (such   as   the   one  
i

n   the   temporary   puncture   repair   kit),   check  
t

he   pressures   of   the   four   tyres   when   cold.  
I

f   it   is   not   possible   to   carry   out   this   check  
s

traight   away,   drive   carefully   at   reduced  
s

peed.
or
F

I
n the event of a puncture, use the
temporary
  puncture   repair   kit   or   the   spare  
w

heel   (depending   on   equipment).
Reinitialisation
It is necessary to reinitialise the system every time   one   or   more   tyre   pressure   is   adjusted,   and  
a

fter   changing   one   or   more   wheels.
A
  label   on   the   middle   pillar,   left   hand   side,   gives  
a

  reminder   of   this.
Safety

deactivation
In extremely severe conditions (deep snow, mud...),   when   it   is   not   possible   to   move   off,   it  
m

ay   be   useful   to   temporarily   deactivate   the  
s

ystems,   so   that   the   wheels   can   spin   freely   and  
r

egain   grip.
F

P
ress this button, located on the left below
the
  steering   wheel.
Illumination
  of   the   lamp   in   the   button   indicates  
t

hat   the   systems   are   deactivated.
Reactivation
These systems are reactivated automatically each   time   the   ignition   is   switched   back   on  
o

r   from   30   mph   (50   km/h)   except   1.6   litre  
(

THP 150,   THP   155   and   THP   160)   and  
R

ACING   petrol   engines.
F
 
P
ress   this   button   again   to   reactivate   them  
m

anually.
Operating fault
The DSC/ASR systems offer exceptional  s afety  i n  n ormal  d riving,  b ut  
t

his   should   not   encourage   the   driver   to  
t

ake   extra   risks   or   drive   at   high   speed.
The
  correct   functioning   of   these  
s

ystems   depends   on   observation   of   the  
ma

nufacturer's
 r
ecommendations
 o
n:
-
 
w
heels   (tyres   and   rims),
-
 
b
raking   components,
-
 el

ectronic
 c
omponents,
-
 
a
ssembly   and   repair   procedures.
After
  an   impact,   have   these   systems  
c

hecked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Illumination
  of   this   warning   lamp   in   the
 i

nstrument   panel   and   the   lamp   in   the
 b

utton,   accompanied   by   an   audible
 s

ignal   and   a   message,   this   indicates   a
 m

alfunction   of   these   systems.
Have
 
it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.

155
DS3_en_Chap06_securite_ed01-2015
Operating limits
The system only detects vehicles that are stationary   or   moving   in   the   same   direction   as  
y

our   vehicle.
It
  does   not   detect   small   vehicles  
(

bicycles,   motorcycles),   pedestrians   or  
a

nimals,   nor   non-reflective   stationary  
ob

jects.
The
  system   is   not   triggered   or   is   interrupted   if  
t

he
 d
river:
-
 
a
ccelerates   strongly
-
 
o
r   turns   the   steering   wheel   suddenly  
(

avoiding
 m
anoeuvre).With the monochrome screen C
F Press the MEn U button for access to the
main   menu.
F

Sel
ect "Personalisation-Configuration ".
F

Sel
ect "
def
ine vehicle parameters ".
F

Sel
ect "
dr
iving assistance ".
F

Sel
ect "Automatic emergency braking:
OFF " or " Automatic emergency braking :
O
n".
F


P
ress the " 7" or " 8"
  button   to   check   or  
u

ncheck   the   box   and   activate   or   deactivate  
t

he   system   respectively.
F

P
ress the " 5" or " 6" button, then the OK
button to select the "OK"
 

box   and   confirm  
o

r the Back
 
button   to   cancel.
With the touch screen tablet
F Press the "MEnU"  button.
F Sel ect the "dr iving"
  menu.
F
 
I
n   the   secondary   page,   select   "Vehicle
settings ".
F

Sel
ect "
dr
iving assistance "
  tab.
F
 
C
heck   or   uncheck   the   "Automatic
emergency braking "
  box   to   activate   or  
d

eactivate   the   system.
F
 
C
onfirm.
Safety