2016 Citroen C4 PICASSO lock

297
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not
block  traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   block   the   wheels.
Check
  that   the   braking   warning   lamp  
a

nd the P   warning   lamp   in   the   parking  
b

rake   control   lever   come   on.
For
  greater   safety,   place   the   chock   2
against
  the   wheel   opposite   to   the   one  
b

eing
 c
hanged.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Never
  go   underneath   a   vehicle  
s

upported   by   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   wheel   bolt   cover(s)   using   the  t
ool 4   (depending   on   equipment).
F
 
F
it   the   security   socket   5 on the
wheelbrace


1   to   slacken   the   security   bolt  
(

if fitted).
F
 
S
lacken   the   other   bolts   (no   more   than   a  
1

/4 turn)   using   the   wheelbrace   1  
o
n l y.
* Position P
 
for
 
an
 
automatic
 
gearbox. Do
  not   use:
-
 
t
he   jack   for   any   purpose   other   than  
l

ifting   the   vehicle,
-
 
a
ny   other   jack   than   the   one  
s

upplied   by   the   manufacturer.F
 
P
lace   the   foot   of   the   jack   3   on   the   ground  
a

nd   check   that   it   is   directly   below   the  
f

ront A or rear B   jacking   point   provided   on  
t

he underbody, whichever is closest to the
wheel   to   be   changed.
Ensure   that   the   jack   is   stable.   If   the  
g

round   is   slippery   or   loose,   the   jack  
m

ay   slip   or   drop   -   Risk   of   injury!
Ensure
  that   the   jack   is   positioned   only  
a

t   one   of   the   jacking   points   A or B
under
  the   vehicle,   making   sure   that   the  
v

ehicle's   contact   sur face   is   centred   on  
t

he   head   of   the   jack.   Other wise   there   is  
a

  risk   of   damage   to   the   vehicle   and/or   of  
t

he   jack   dropping   -   Risk   of   injury!
8
In the event of a breakdown

304
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
The direction indicator bulb is located below
the  front   lamp.
F

T
urn the bulb holder a quarter turn anti-
clockwise.
F
 
R
emove   the   bulb   holder.
F
 
C
hange   the   failed   bulb.
For reassembly, carry out these operations in
reverse
 o

rder.
Direction indicators Front foglamps
F Unclip  the   finisher   by   pulling   at   the   top.
F  R emove   the   two   screws   to   remove   the   unit.
F
 
T
urn   the   bulb   holder   a   quarter   turn.
F
 
R
emove   the   bulb   holder.
F
 
C
hange   the   failed   bulb.
For reassembly, carry out these operations in
reverse
  order,   pressing   on   the   finisher   to   refit   it.
Faster
 
flashing
 
of
 
a
 
direction
 
indicator
 
w

arning
 
lamp
 
(left
 
or
 
right)
 
indicates
 
a
 
f

ailed
 
bulb
 
on
 
that
 
side.
Direction indicators (light
emitting diodes - LED)
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
In the event of a breakdown

306
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgate
Contact a CITROËN dealer or a
qualified  workshop   for   the   replacement  
o

f   reversing   lamp   and   direction   indicator  
b

ulbs.
Identify
 
the
 
failed
 
bulb.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
access
 
cover.
F
 
R

emove
 
the
 
three
 
lamp
 
fixing
 
screws
 
A
.
F
 
D

isconnect
 
the
 
lamp
 
connector.
F

C

arefully remove the lamp from the outside
by
 
pressing
 
the
 
retaining
 
clip
 
B
.
F

T

urn the bulb holder a quarter of a turn
anti-clockwise   and   pull   the   bulb   out.
F
 
C

hange   the   bulb.
For reassembly, carry out these operations in
reverse
 o
rder.
Model with LED lamps
Model with conventional bulb lamps
In the event of a breakdown

308
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgateModel with LED lamps
Model with conventional bulb lamps
Identify
 
the
 
failed
 
bulb.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
access
 
cover. F
 
R

emove
 
the
 
three
 
lamp
 
fixing
 
screws
 
A .
F
 
D

isconnect
 
the
 
lamp
 
connector.
F
 
C

arefully
 
r

emove
 
t

he
 
l

amp
 
f

rom
 
i

ts
 
h

ousing.
F

T

urn the bulb holder a quarter of a turn
anti-clockwise
 
and
 
pull
 
the
 
bulb
 
out.
F
 
C

hange
 
the
 
bulb.
For reassembly, carry out these operations in
reverse
 o

rder.
In the event of a breakdown

313
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Fusebox 2Fuse N° Rating Functions
F7 10 ABoot
  12   V   socket,   rear   multimedia.
F8 20 ARear
  wiper.
F10 30 ALocks.
F17 5 AInstrument
  panel.
F18 5 AAutomatic
  gearbox   gear   selector.
F21 3 ASTART/STOP
  button.
F22 3 ARain
  and   sunshine   sensor,   windscreen   camera.
F24 5 AParking
  sensors,   panoramic   visual   aid.
F27 5 AAutomatic
  gearbox.
F29 20 AAudio
  and   telematic   systems.
F32 15 A12
  V   sockets.
F35 5 AHeadlamp
  beam   height   adjustment,   heated   rear   screen,   radar.
F36 5 AInterior
  lighting:   glove   box,   central   storage,   reading   lamps,  
c

ourtesy   lamps.
8
In the event of a breakdown

318
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
The Stop & Start system may not be
operational  during   the   trip   following   the  
f

irst   engine   start.
In this case, the system will only be
available
  again   after   a   continuous  
p

eriod of immobilisation of the vehicle,
a period which depends on the ambient
temperature
  and   the   state   of   charge   of  
t

he   battery   (up   to   about   8   hours).
Do
 
not
 
force
 
the
 
lever
 
as
 
locking
 
will
 
n

ot be possible if the clamp is not
positioned
 
correctly;
 
start
 
the
 
procedure
 
ag

ain.
Disconnecting the (+) terminal
F

Ra

ise the lever A fully to release the
clamp


B
.
Reconnecting the (+) terminal
F
P
osition the open clamp B of the cable on
the
 
positive
 
post
 
(+)
 
of
 
the
 
battery.
F

P

ress down on the clamp to position it
correctly
 
on
 
the
 
battery
 
post.
F
 
L

ock
 
the
 
clamp
 
by
 
lowering
 
the
 
lever
 
A .
Disconnecting the battery
In order to maintain an adequate state
of
  charge   for   starting   the   engine,   it   is  
r

ecommended that the battery be disconnected
if
  the   vehicle   is   taken   out   of   service   for   a   long  
p

eriod.
Before
  disconnecting   the   battery:
F
 
c
lose   all   openings   (doors,   boot,   windows,  
r

oof),
F

s
witch off all electrical consumers (audio
system,
  wipers,   lighting, ...),
F
 
s
witch   off   the   ignition   and   wait   for   four  
m

inutes.
At
  the   battery,   detach   just   the   (+)   terminal.Following reconnection of the battery
Following reconnection of the battery, switch on the   ignition   and   wait   1   minute   before   starting   to  
p

ermit   initialisation   of   the   electronic   systems.  
H

owever,   if   problems   remain   following   this  
o

peration, contact a CITROËN dealer or a
qualified
 w

orkshop.
Referring
  to   the   corresponding   section,   you  
m

ust
 y
ourself
 r
einitialise
 (
depending
 o
n
 ve

rsion):
-
 
t
he   remote   control   key,
-

t
he electric blind(s),
-
 ...
Quick release terminal
In the event of a breakdown

319
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
To w i n g
The towing eye is installed in the boot under the   floor.
To
  gain   access   to   it:
F

o
pen the boot,
F

l
ift the floor and remove it,
F
 
r
emove   the   towing   eye   from   its   housing.
General recommendations
Observe the legislation in force in your country.
E nsure   that   the   weight   of   the   towing   vehicle   is   higher   than   that   of   the   towed   vehicle.
The
  driver   must   remain   at   the   wheel   of   the   towed   vehicle   and   must   have   a   valid   driving   licence.
When
  towing   a   vehicle   with   all   four   wheels   on   the   ground,   always   use   an   approved   towing  
a

rm;   rope   and   straps   are   prohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine   off,   there   is   no   longer   any   power   assistance   for  
b

raking   or   steering.
In
  the   following   cases,   you   must   always   call   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way   or   fast   road,
-
f

our-wheel drive vehicle,
-
 
w
hen   it   is   not   possible   to   put   the   gearbox   into   neutral,   unlock   the   steering,   or   release  
t

he   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the   ground,
-
 
w
here   there   is   no   approved   towing   arm   available...
Procedure
 
for
 
having
 
your
 
vehicle
 
towed
 
or
 
for
 
towing
 
another   vehicle   using   the   towing   eye.
Access to the tools
8
In the event of a breakdown

320
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Towing another vehicle
F On the rear bumper, unclip the cover by pressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
F
O
n the front bumper, unclip the cover by
pressing
 
on
 
the
 
left.
F
 
S

crew
 
the
 
towing
 
eye
 
in
 
fully.
F
 
I

nstall
 
the
 
towing
 
bar.
F
 
P

lace
 
the
 
gear
 
lever
 
in
 
neutral
 
(position
 
N
with
 
an
 
automatic
 
gearbox).
Towing your vehicle
Failure to observe this instruction could
result   in   damage   to   certain   components  
(

braking,   transmission...)   and   the  
a

bsence   of   braking   assistance   the   next  
t

ime   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key  
i

n
  the   ignition   one   notch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
In the event of a breakdown