2016 Citroen C4 headlamp

130
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Switching off
The welcome lighting switches off automatically after   a   programmed   time,   when   the   ignition   is  
s

witched   on   or   on   locking   the   vehicle.
Welcome lighting
Switching on
F Press  the   open   padlock   on   the  r
emote   control   or   one   of   the   front  
d

oor handles with the "Keyless
Entry
  and   Starting"   system.
The
 
remote   switching   on   of   the   lighting   makes  
y

our
 
access   to   the   vehicle   easier   in   poor   light.  
I

t
 
is
 
activated   depending   on   the   ambient   light  
l

evel
 
detected   by   the   sunshine   sensor.
The
 
sidelamps   and   dipped   beam   headlamps,  
a

s
 
well
 
as
  the   side   spotlamps,   located   under  
t

he
 
door
 
mirrors,   come   on;   your   vehicle   is   also  
u

nlocked.
Programming
Activation or deactivation, as well as
the   duration   of   the   lighting   duration  
f

or   the   welcome   lighting   can   be   set  
v

ia   the   vehicle   configuration   menu.
Automatic guide-me-home
lighting
When the automatic illumination of headlamps functions   is   activated,   if   the   ambient   light   level  
i

s   low   the   dipped   beam   headlamps   remain   on  
w

hen   switching   off   the   ignition.
Settings
Activation and deactivation, as
well  as   the   duration   of   the   guide-
me-home
  lighting   can   be   set   in   the  
v

ehicle   configuration   menu.
Lighting and visibility

132
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
To avoid causing a nuisance to other road users,   the   height   of   the   halogen   headlamp  
b

eams   should   be   adjusted   according   to   the  
l

oad   in   the   vehicle.
0.
 1

  or   2   people   in   the   front   seats.
-.
 3

  people.
1.
 5

  people.
-.
 I

ntermediate
 s
etting.
2.
 5

  people   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
3.
 D

river   +   maximum   authorised   load.
Headlamp beam height adjustment
Automatic adjustment of
xenon headlamps
This system adjusts the height of the xenon headlamp   beams   automatically   and   when s

tationary,   according   to   the   load   in   the   vehicle,   so
 a

s   to   avoid   causing   a   nuisance   to   other   road   users.
If
  a   malfunction   occurs,   this  
w

arning   lamp   is   displayed   in   the  
i

nstrument   panel,   accompanied   by  
a

n   audible   signal   and   a   message   in  
t

he   screen.
The
  system   then   places   your  
h

eadlamps   in   the   lowest   position.
Do
  not   touch   the   xenon   bulbs.
Contact a CITROËN dealer or a
qualified
 w

orkshop.
The
 
initial
 
setting
 
is
 
position
 
"0" .
Manual adjustment of
halogen headlamps
Lighting and visibility

133
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Directional lighting
Programming
with directional lighting
without directional lighting
When
 
the
 
dipped
 
or
 
main
 
beam
 
headlamps
 
a

re
 
on,
 
this
 
function,
 
allows
 
the
 
light
 
beams
 
to
 
b

etter
 
follow
 
the
 
road.
The use of this function, coupled with the
xenon
 
headlamps
 
and
 
the
 
cornering
 
lighting,
 
c

onsiderably
 
improves
 
the
 
quality
 
of
 
your
 
l

ighting
 r

ound
 b

ends.
Operating fault
If a fault occurs, this warning lamp f lashes   in   the   instrument   panel,  
a

ccompanied   by   a   message   in   the  
sc

reen.
Contact
 
a
  CITROËN   dealer   or   a   qualified  
w

orkshop.
This
 
function   is   inactive:
-

w

hen stationary or at low speeds,
-
 w

hen
 r
everse
 i
s
 enga
ged.
The   system   is   activated   or  
d

eactivated in the vehicle
configuration
 m
enu.
 T

he
 
system   is   activated   by   default.
The
 
state
 
of   the   system   stays   in   memory   on  
s

witching
 
off   the   ignition.
4
Lighting and visibility

137
C4-2_en_Chap04_eclairage-et-visibilite_ed02-2015
Special position of the
windscreen wipers
This position permits release of the windscreen wiper   blades.
It
  is   used   for   cleaning   or   replacement   of   the  
b

lades.   It   can   also   be   useful,   in   winter,   to  
d

etach   the   blades   from   the   windscreen.
F
 
A
ny   action   on   the   wiper   stalk   in   the   minute  
a

fter   switching   off   the   ignition   places   the  
b

lades   vertically   on   the   screen.
F
 
T
o   park   the   blades   again,   switch   on   the  
i

gnition   and   operate   the   wiper   stalk.To
  maintain   the   effectiveness   of   the   flat  
w

iper   blades,   it   is   advisable   to:
-
 
h
andle   them   with   care,
-
 
c
lean   them   regularly   using   soapy  
w

ater,
-
 
a
void   using   them   to   retain  
c

ardboard on the windscreen,
-
 
r
eplace   them   at   the   first   signs   of  
w

e a r.
Windscreen and headlamp
wash
Low screenwash / headlamp
wash fluid level
On vehicle fitted with headlamp washers, the low   level   of   this   fluid   is   indicated   by   gauge   in  
t

he   reservoir   filler   neck   under   the   bonnet.
Checking
  and   topping   up   this   fluid   can   should  
b

e   done   with   the   engine   off.
The
  level   of   this   fluid   should   be   checked  
r

egularly,
 par
ticularly
 d
uring
 w
inter.
For
  more   information   on   checking   the  
s

creenwash   /   headlamp   wash   level,   refer   to   the  
c

orresponding
 s
ection.
F
 
P
ull   the   windscreen   wiper   stalk   towards  
y

ou.   The   windscreen   wash   then   the  
w

indscreen   wipers   operate   for   a   fixed  
p

eriod.
The   headlamp   washers   only   operate   when   the
dipped or main beam headlamps are on , with
the vehicle moving .
To   reduce   the   consumption   of   the   fluid  
b

y   the   headlamp   washers,   they   operate  
o

nly with every seventh use of the
screenwash   or   every   25   miles   (40   km)  
d

uring   a   given   journey.
4
Lighting and visibility

170
C4-2_en_Chap06_conduite_ed02-2015
Switching off the engine
Energy economy mode
After switching off the engine (position 1- Stop), f
or   a   maximum   of   30   minutes   you   can   still   use  
f

unctions   such   as   the   audio   and   telematic  
s

ystem,   the   wipers,   dipped   beam   headlamps,  
c

ourtesy   lamps,   ...
F
 
C

heck
 
that
 
the
 
parking
 
brake
 
is
 
correctly
 
a

pplied,
 
particularly
 
on
 
sloping
 
ground.
Never
 
switch
 
off
 
the
 
ignition
 
before
 
the
 
v

ehicle
 
is
 
at
 
a
 
complete
 
stop.
 
With
 
the
 
e

ngine
 
off,
 
the
 
braking
 
and
 
steering
 
a

ssistance
 
systems
 
are
 
also
 
cut
 
off:
 
risk
 
o

f
 
loss
 
of
 
control
 
of
 
the
 
vehicle.
To
 
facilitate
 
unlocking
 
of
 
the
 
steering
 c

olumn,
 
it
 
is
 
recommended
 
that
 
the
 w

heels
 
be
 
returned
 
to
 
the
 
straight
 
ahead
 p

osition
 
before
 
switching
 
off
 
the
 
engine.
When
 
you
 
leave
 
the
 
vehicle,
 
keep
 
the
 
k

ey
 
with
 
you
 
and
 
lock
 
the
 
vehicle. For
  more   information   on   the  
e

nergy   economy   mode,   refer   to   the  
c

orresponding
 s
ection.Key left in the "Ignition on" position
If the key has been left in the ignition switch at position 2 (Ignition on) ,
the
  ignition   will   be   switched   off  
a

utomatically   after   one   hour.
To
  switch   the   ignition   back   on,   turn   the  
k

ey   to   position   1 (Stop),
  then   back   to  
p

osition 2 (Ignition on) .
F
 
S

top
 
the
 
vehicle.
F
 W
ith
 
the
 
engine
 
running
 
at
 
idle,
 
turn
 
the
 
key
 t
o position 1 .
F
 
R

emove
 
the
 
key
 
from
 
the
 
ignition
 
switch.
F
 
T

o
 
lock
 
the
 
steering
 
column,
 
turn
 
the
 
s

teering
 
until
 
it
 
locks.
Driving

215
C4-2_en_Chap07_infos-pratiques_ed02-2015
Before each use
Check that the towball is correctly fitted by verifying the following points:
-  t he   towball   is   correctly   locked   in   place   (position   A),
-
 
t
he   security   key   lock   is   on   and   the   key   removed;   the   locking   wheel   can   no   longer   be  
ope

rated,
-
 
t
he   towball   must   no   longer   move   at   all   in   its   carrier;   try   to   shake   it   by   hand.
During use
Never unlock the device when a trailer or load carrier is fitted to the towball.
N ever   exceed   the   maximum   authorised   weight   for   the   vehicle   plus   trailer   (Gross   Train  
W

eight   -   GTW).
Before
  driving,   check   the   adjustment   of   the   headlamp   beam   height.
For
  more   information   on   adjusting   the   headlamps,   refer   to   the   corresponding   section.
After use
For journeys made without a trailer or load carrier, the trailer harness socket must be folded away,   the   towball   removed   and    the   blanking   plug   inserted   in   the   carrier.   This   measure  
a

pplies   particularly   if   the   towball   could   hinder   visibility   of   the   number   plate   or   lighting.
7
Practical information

219
C4-2_en_Chap07_infos-pratiques_ed02-2015
Load reduction modeE nergy ec onomy m ode
Switching to economy mode
Once this period has elapsed, a message a
ppears   in   the   screen   indicating   that   the  
v

ehicle   has   switched   to   economy   mode   and   the  
a

ctive   functions   are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically the   next   time   the   vehicle   is   driven.
F
 
I
n   order   to   resume   the   use   of   these  
f

unctions   immediately,   start   the   engine   and  
l

et   it   run   for   a   few   minutes.
The
  time   available   to   you   will   then   be   double  
t

he   period   for   which   the   engine   is   left   running.  
H

owever, this period will always be between
five
  and   thirty   minutes.
System
 
which
 
manages
 
the
 
use
 
of
 
certain
 
f

unctions
 
according
 
to
 
the
 
level
 
of
 
charge
 
r

emaining
 
in
 
the
 
battery.
When
 
the
 
vehicle
 
is
 
being
 
driven,
 
the
 
load
 
r

eduction
 
function
 
temporarily
 
deactivates
 
c

ertain
 
functions,
 
such
 
as
 
the
 
air
 
conditioning,
 
t

he
 
heated
 
rear
 
screen...
The deactivated functions are reactivated
automatically
 
as
 
soon
 
as
 
conditions
 
permit. System
 
which
 
manages
 
the
 
period
 
of
 
use
 
of
 
certain
  functions   to   conserve   a   sufficient   level   of  
c

harge
 
in
 
the
 
battery.
After
 
the
 
engine
 
has
 
stopped,
 
you
 
can
 
still
 
use
 
functions   such   as   the   audio   equipment,   windscreen  
w

ipers,
 
dipped
 
beam
 
headlamps, courtesy
 
lamps,
 
etc.   for   a   maximum   combined   period   of  
t

hirty minutes.
A  flat   battery   prevents   the   engine   from  
s

tarting.
For
  more   information   on   the   12   V  
b

attery,   refer   to   the   corresponding  
s

ection.
This
 
period
 
may
 
be
 
greatly
 
reduced
 
if
 
t

he
 
battery
 
is
 
not
 
fully
 
charged.
If
 
the
 
telephone
 
is
 
being
 
used
 
at
 
the
 
s

ame
 
time
 
with
 
the
 
touch
 
screen
 
tablet,
 
i

t
 
will
 
be
 
interrupted
 
after
 
10
 
minutes.
7
Practical information

224
C4-2_en_Chap07_infos-pratiques_ed02-2015
Petrol engines
1. Power steering r eservoir.
2. S creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant   header   tank.
4.
 B

rake   fluid   reservoir.
5.
 B

attery   /   Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
Practical information