2016 Citroen C4 lock

36
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Starting prevented
Every  time   the   ignition   is   switched   on,   the  
S

ERVICE   and   engine   diagnostic   warning  
l

amps   come   on   and   the   UREA   warning   lamp  
f

lashes,   accompanied   by   the   temporary   display  
o

f   "NO   START   IN"   and   0   miles   or   kilometres -  
(

"NO   START   IN   0   miles"   means   "Starting  
p

revented").
To
  be   able   to   start   the   engine,   you   must   call   on  
a

  CITROËN   dealer   or   a   qualified   workshop.
You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   prevention  
s

ystem   inhibits   engine   starting.
Distance recorders
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Trip distance recorder
Total distance recorder
Measures the total distance travelled by the
vehicle
  since   its   first   registration. Measures the distance travelled since it was
last
  reset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   and   hold   this  
b

utton   until   zeros   appear.
Instruments

37
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Setting the time and the time
format in the instrument
panel with the clock
On the type 1 instrument panel (without audio system),   to   adjust   the   time,   use   buttons   A and
B
  then   carry   out   the   operations   in   the   following  
o

rder:
F

p
ress buttons A and B  
s
imultaneously:
 t

he minutes   flash,
F
press A
  to   increase   the   minutes   or   B to
reduce
  the   minutes,
F

p
ress buttons A and B  
s
imultaneously:
 t

he hours flash,
F
press A to increase the hours or B to
reduce the hours, After
  approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.On
  the   type   1   instrument   panel   (without   audio  
s

ystem),   to   change   the   display   units,   use  
b

uttons A and B then carry out the operations
in   the   following   order:
F
p
ress buttons A and B  
s
imultaneously
 fo
r
 t

hree   seconds:   km/h   or   mph   flashes,
F
p
ress button A or B   to   change   the   units,
F
p
ress buttons A and B   simultaneously   to  
e

xit   from   setting   units.
After   approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.
Setting units in the instrument
panel with the clock
Setting the time and units
in the multifunction screen
The other instrument panels are associated w
ith   an   audio   system   and   a   multifunction  
s

creen.   Refer   to   the   corresponding   screens.
F

p

ress buttons A and B
 
s

imultaneously:
 
2

4 H or 12 H is displayed and flashes,
F

p

ress button A or B
 
to
 
change
 
the
 
format,
F

p

ress buttons A and B
 
simultaneously
 
to
 
e

xit
 
from
 
time
 
setting.
1
Instruments

41
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Once the "TRIP COMPUTER" menu has been selected,   you   can   start   diagnostics   of   the   status  
o

f   the   equipment   (active,   not   active,   faulty).
Trip computer Date and time
Once the "DATE AND TIME" menu has been s
elected,   you   have   access   to   the   following  
se

ttings:
-
year,
-
 
m
onth,
-


d ay,
-
hours,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK" button to record the
change
  and   return   to   the   normal   display   or  
p

ress the "Back"
 
button   to   cancel.
Languages
Once the "LANGUAGES" menu has been selected,   you   can   choose   the   language   used   by  
t

he   display,   from   a   pre-defined   list.
Vehicle parameters
Once the " VEHICLE PAR AM" menu has been selected, you can activate or deactivate the
following
 e

quipment:
-
 
"
PARK  
B
R AKE"  
(
Automatic  
e
lectric  
p
arking  
b

rake;   refer   to   the   "Driving"   section).
-
 
"
BEND   LIGHTING"   (Directional   lighting;  
r

efer   to   the   "Lighting   and   visibility"   section),
-
 
"
AUTO   HEADLAMPS"   (Automatic  
i

llumination   of   headlamps;   refer   to   the  
"

Lighting   and   visibility"   section),
-
 
"
REAR   WIPE   ACT"   (Rear   wiper   coupled  
w

ith   reverse   gear;   refer   to   the   "Lighting   and  
v

isibility"
 s
ection),
-
 
"
GUIDE  
L
AMPS"  
(
Guide-me-home  
l
ighting;  
r

efer   to   the   "Lighting   and   visibility"   section),
-
 
"
ELECTRIC   BOOT"   (Selective   unlocking   of  
t

he   boot;   refer   to   the   "Access"   section),
-
 
"
CABIN   SELECT"   (Selective   unlocking;  
r

efer   to   the   "Access").
As
  a   safety   measure,   configuration   of  
t

he   multifunction   screen   by   the   driver  
m

ust   only   be   done   when   stationary.
1
Instruments

44
C4-2_en_Chap01_instruments-de-bord_ed02-2015
"Personalisation-
configuration" menu
This menu gives access to the following functions:
-
 
"
Define   the   vehicle   parameters",
-
 
"
Choice   of   language",
-
 
"
Display   configuration".
Define the vehicle parameters
- "Vehicle  lighting"   (refer   to   the   "Lighting   and  v
isibility" s ection):
●
 
"
Directional   headlamps"   (Main   /  
a

dditional
 d
irectional
 l
ighting),
-
 
"
Interior   lighting"   (refer   to   the   "Lighting   and  
v

isibility"
 s
ection):
●
 
"
Follow-me-home   headlamps"  
(

Automatic   operation   of   headlamps   after  
s

witching   off   the   ignition),
●
 
"
Welcome   lighting"   (Exterior   and   interior  
w

elcome   lighting).
This
 
menu
 
allows
 
you
 
to
 
activate
 
or
 
deactivate
 t
he
 
following
 
equipment,
 
classified
 
in
 
different
 
c

ategories:
-
 
"

Access
 
to
 
the
 
vehicle"
 
(refer
 
to
 
the
 
"

Access"
 s

ection):
●
 
"

Plip
 
action"
 
(Selective
 
unlocking
 
of
 
the
 
d

river's
 do

or),
●
 
"

Unlocking
 
boot
 
only"
 
(Selective
 
u

nlocking
 
of
 
the
 
boot).
-
 
"

Driving
 
assistance":
●
 
"

Parking
 
brake
 
automatic"
 
(Automatic
 
e

lectric
 
parking
 
brake;
 
refer
 
to
 
the
 
"

Driving"
 se

ction),
●
 
"

Rear
 
wipe
 
in
 
reverse
 
gear"
 
(Rear
 
wiper
 
c

oupled
 
to
 
reverse
 
gear;
 
refer
 
to
 
the
 
"

Lighting
 
and
 
visibility"
 
section),
●
 
"

Speeds
 
memorised"
 
(Memorising
 
s

peeds;
 
refer
 
to
 
the
 
"Driving"
 
section).
Instruments

49
C4-2_en_Chap01_instruments-de-bord_ed02-2015
"Driving" menu
ButtonCorresponding function Comments
Speed settings Memorisation
  of   speeds   for   use   with   the   speed   limiter   or   cruise   control.
Vehicle settings Access
  to   other   functions   with   settings   that   can   be   adjusted.   The   functions   are   grouped  
t

ogether   under   three   tabs:
-
"Driving assistance "
-
 
"
Automatic   parking   brake"   (Automatic   electric   parking   brake;   refer   to   the   "Driving"  
s

ection),
-
 
"
Automatic   rear   wiper   in   reverse"   (Activation   of   rear   wiper   coupled   to   reverse   gear;   refer  
t

o   the   "Lighting   and   visibility"   section).
-
"Lighting "
-
 
"
Guide-me-home   lighting"   (Automatic   guide   me   home   lighting;   refer   to   the   "Lighting   and  
v

isibility"section),
-
 
"
Welcome   lighting"   (Exterior   welcome   lighting;   refer   to   the   "Lighting   and  
v

isibility"section),
-
 
"
Adaptive   lighting"   (Main   /   additional   directional   lighting;   refer   to   the   "Lighting   and  
v

isibility"
 s
ection).
-
"Vehicle access "
-
 
"
Driver   plip   action"   (Selective   unlocking   of   the   driver's   door;   refer   to   the   "Access"  
s

ection).
-
 
"
Unlocking   boot"   (Selective   unlocking   of   the   boot;   refer   to   the   "Access"   section).
Select
  or   deselect   the   tabs   at   the   bottom   of   the   screen   to   display   the   functions   required.
Diagnostic List
  of   current   alerts.
The
  systems   with   settings   that   can   be   adjusted   are   detailed   in   the   table   below.
1
Instruments

56
C4-2_en_Chap02_ouvertures_ed02-2015
Remote control key
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle, as well   as   providing   protection   against   theft.
Unlocking the vehicle
Unfolding the key
F Press  this   button   to   unfold   the   key.
F  
P
ress   the   open   padlock   to   unlock  
t

he   vehicle   completely. F
 
P
ress   the   open   padlock   once   to  
u

nlock   the   driver's   door   only.
Selective unlocking using the
remote control
F Maintain the press on the open
padlock   until   the   desired   position  
i

s   obtained.   The   windows   stop   as  
s

oon   as   you   release   the   button.
Opening the windows using the
remote control
Unlocking using the key
F Turn  the   key   for wards   in   the   driver's   door  l
ock   to   unlock   the   vehicle   completely.
Complete unlocking using the
remote control
F Press  the   open   padlock   again   to   unlock   the  o
ther   doors   and   the   boot.
The direction indicators flash for a
few seconds.
The
  spotlamps   in   the   door   mirrors  
come
  on.
Depending
  on   version,   the   door   mirrors  
u

nfold,   the   welcome   lighting   comes   on,  
t

he   alarm   is   deactivated.
The
  complete   or   selective   door  
u

nlocking   parameter   is   set   via   the  
v

ehicle   configuration   menu.
Access

57
C4-2_en_Chap02_ouvertures_ed02-2015
Selective unlocking of the boot
F Press the central button on the remote   control   to   unlock   the  
b

oot.   The   doors   remain   locked.
If
 
selective   unlocking   of   the   boot   is   deactivated,  
p

ressing
 
this   button   also   unlocks   the   doors.
Don't
  forget   to   lock   the   boot   again   by  
p

ressing   the   closed   padlock   button. The
  complete   or   selective   boot  u
nlocking   parameter   is   set   via   the  
v

ehicle   configuration   menu.
Selective
  unlocking   of   the   boot   is  
a

ctivated   by   default.
2
Access

58
C4-2_en_Chap02_ouvertures_ed02-2015
Locking the vehicle
F Press  the   closed   padlock   to   lock  t
he   vehicle.
Normal locking using the remote
control
Normal locking using the key
F Turn   the   key   towards   the   rear   in   the   driver's  d
oor   lock   to   lock   the   vehicle.
The direction indicators flash for a
few seconds.
Depending
  on   version,   the   door   mirrors   fold,  
t

he   alarm   is   activated.
Closing the windows using the
remote control
F Press and hold the closed padlock   button   until   the   desired  
p

osition   is   obtained.   The  
w

indows stop when you release
the
  button.
When
  closing   the   windows   using   the  
r

emote   control   you   must   ensure   that  
n

othing   prevents   them   from   closing  
c

o r r e c t l y.
If you want to leave the windows
partly
  open,   you   must   deactivate   the  
v

olumetric
 alar
m
 m
onitoring.
If one of the doors or the boot is still
open,
 
the
 
central
 
locking
 
does
 
not
 
take
 
p

lace.
However,
 
the
 
alarm
 
(if
 
present)
 
will
 
b

e
 
completely
 
activated
 
after
 
about
 
4

5 seconds.
If
 
the
 
vehicle
 
is
 
unlocked
 
inadvertently
 
a

nd with no action on the doors or
boot,
 
the
 
vehicle
 
will
 
lock
 
itself
 
again
 
a

utomatically
 
after
 
about
 
30
 
seconds.
If
 
the
 
alarm
 
had
 
previously
 
been
 
a

ctivated, it will not be reactivated
automatically.
The
 
folding
 
and
 
unfolding
 
of
 
the
 
door
 
m

irrors
 
using
 
the
 
remote
 
control
 
can
 
be
 
d

eactivated by a CITROËN dealer or a
qualified
 w

orkshop.
Access