2016 Citroen C4 instrument panel

21
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Warning/indicator lampis on Cause Action/Observations
Foot on the
clutch** fixed.
In
  the   STOP   mode   of   Stop   &   Start,  
c

hanging   to   START   mode   is   refused  
b

ecause the clutch pedal is not fully
down. You
  must   declutch   fully   to   allow   the   change   to   engine  
S

TART   mode.
**
  Only   on   the   type   1   instrument   panel.
Dynamic
stability control
(DSC/ASR)
flashing.
Regulation
  by   the   system   is   active. The   system   optimises   traction   and   improves   the  
d

irectional   stability   of   the   vehicle.
fixed,
  associated   with  
i

llumination   of   the  
i

ndicator   lamp   in   the  
d

eactivation button,
accompanied
  by   an  
a

udible   signal   and   a  
m

essage.The
  DSC/ASR   or   hill   start   assist  
s

ystem   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Power
steering fixed.
The
  power   steering   has   a   fault. Drive   carefully   at   reduced   speed.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Under-inflation fixed. The
  pressure   in   one   or   more   wheels  
i

s   too   low.Check
  the   pressure   of   the   tyres   as   soon   as   possible.
This
  check   should   preferably   be   carried   out   when   the  
t

yres   are   cold.
+ flashing
  then   fixed,  
a

ccompanied   by   the  
S

ervice   warning   lamp.The
  tyre   pressure   monitoring   system  
h

as a fault or no sensor is detected
on
  one   of   the   wheels.Under-inflation
  detection   is   not   assured.
Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Directional
headlamps flashing.
The
  directional   headlamps   system  
h

as   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
1
Instruments

22
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Presence of
water in the
Diesel fuel**fixed.
The   Diesel   fuel   filter   contains   water. Risk   of   damage   to   the   injection   system   on   Diesel  e
ngines.
Contact
  a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout   delay.
Particle filter
(Diesel) fixed,
 a

ccompanied
 b

y   an   audible   signal  
m

essage   on   the   risk  
o

f   blockage   of   the  
p

article   filter.This indicates that the particle filter is
starting
  to   become   saturated.As
  soon   as   driving   conditions   allow,   regenerate   the  
f

ilter   by   driving   at   a   speed   of   at   least   35   mph   (60   km/h)  
u

ntil   the   warning   lamp   goes   off.
fixed,
  accompanied   by
 a

n   audible   signal   and
 a

nd   a   message   that   the
 par

ticle filter additive
level
  is   too   low.This indicates the low level of the
additive
 r

eservoir.Have the reservoir topped up as soon as possible by a
CITROËN
  dealer   or   a   qualified   workshop.
Warning
/indicator lampis on Cause Action/Observations
Airbags temporarily. This   lamp   comes   on   for   a  
f

ew seconds when you turn on the
ignition,   then   goes   off.
This   lamp   should   go   off   when   the   engine   is   started.
If   it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
fixed. One   of   the   airbag   or   seat   belt  
p

retensioner   systems   has   a   fault.
Have   it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
**
 
Only
 
on   the   type   1   instrument   panel.
Instruments

29
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Engine oil level indicator*
Oil level correct
This is indicated by the flashing of "O IL" or the
display   of   a   message,   accompanied   by   the  
s

ervice   warning   lamp   and   an   audible   signal.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
a

void   damage   to   the   engine.
For
  more   information   on   checking   the   oil   level,  
r

efer   to   the   corresponding   section.
Oil level indicator fault
In the event of a fault with the electric indicator,
the  oil   level   is   no   longer   monitored.
If
  the   system   is   faulty,   you   must   check   the  
e

ngine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
For
  more   information   on   checking   the   oil   level,  
r

efer   to   the   corresponding   section.Oil level incorrect
This is signalled by the flashing of "O IL- -" or
the   display   of   a   message.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop.
On versions fitted with an electric oil level
indicator,
 
the
 
state
 
of
 
the
 
engine
 
oil
 
level
 
is
 
d

isplayed
 
in
 
the
 
instrument
 
panel
 
for
 
a
 
few
 
s

econds,
 
at
 
the
 
same
 
time
 
as
 
the
 
servicing
 
i

nformation.
* Depending
 
on
 
version.
The level read will only be correct if
the
 
vehicle
 
is
 
on
 
level
 
ground
 
and
 
the
 
e

ngine
 
has
 
been
 
off
 
for
 
more
 
than
 
3

0 minutes.
1
Instruments

30
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Service indicator
System that informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vice
 s
chedule.
The point at which the service is due
is
  calculated   from   the   last   service  
i

ndicator zero reset,   according   to   the   distance  
c

overed   and   the   time   elapsed   since   the   last  
ser

vice.
For BlueHDi Diesel versions, the level of
deterioration
  of   the   engine   oil   may   also   be  
t

aken   into   account,   depending   on   the   country  
o

f   sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition is switched on, no service information appears   in   the   instrument   panel   central   screen.
Between 600 miles (1 000 km)
and 1800 miles (3 000 km) remain
before the next service is due
For a few seconds after the ignition is switched on,   the   spanner   symbolising   the   service o

perations   comes   on.   The   distance   recorder
 d

isplay   line   or   a   specific   message   in   the
 i

nstrument   panel   central   screen   indicates   the
 d

istance
 r
emaining
 b
efore
 t
he
 n
ext
 ser
vice
 i
s
 d
ue.
For example:
 

1   700   miles   (2   800   km)   remain
 b

efore   the   next   service   is   due.
For
  a   few   seconds   after   the   ignition   is   switched
 o

n,   the   screen   indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  a   few   seconds   after   the   ignition   is   switched  
o

n,   the   screen   indicates:
A
 
few
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 
t

he spanner goes off ;
 
the
 
distance
 
recorder
 
r

esumes
 
its
 
normal
 
operation.
 
The
 
screen
 
then
 
i

ndicates
 
the
 
total
 
and
 
trip
 
distances. A
  few   seconds   after   the   ignition   is   switched  
o

n,   the   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
Instruments

33
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Range indicators
Once the AdBlue® tank is on reserve or after d
etection
 
of
 
a
 
fault   with   the   SCR   emissions  
c

ontrol
 
system,
 
when   the   ignition   is   switched  
o

n,
 
an
 
indicator
 
displays   an   estimate   of   the  
d

istance
 
that
 
can
 
be   covered,   the   range,   before  
e

ngine
 
starting
 
is
 
prevented.
In
 
the
 
event
 
of
 
simultaneous   system   fault   and  
l

ow AdBlue
® level, the shortest range figure is t
he
 
one
 
displayed.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
W hen   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning   lamp   comes   on,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance,   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before   engine  
s

tarting   is   prevented   -   (For   example   "NO  
S

TART   IN   900   miles"   means   that   "Starting   will  
b

e   prevented   in   900   miles).
When
  driving,   this   display   appears   every  
1

50 miles   (300   km)   until   the   additive   tank   has  
be

en
 t
opped-up.
Go
  to   a   dealer   CITROËN   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
For
 
more
 
information
 
on
 
topping-up   the  
Ad

Blue
® additive, refer to the corresponding s
ection.
The
 
engine
 
start
 
prevention
 
system
 
r

equired
 
by
 
regulations
 
is
 
activated
 
a

utomatically
 
once
 
the
 
AdBlue
® tank is e
m pt y.
1
Instruments

34
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE w
arning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
0 k

m   or   miles   -   ("NO   START   IN   0   miles"   means  
"

Starting
 p
revented").
The AdBlue
® tank  is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before   engine  
s

tarting   is   prevented   -   (For   example   "NO  
S

TART   IN   180   miles"   means   "Starting   will   be  
p

revented   in   180   miles).
When
  driving,   this   display   appears   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Other wise you will not be able to restart your
engine.
For
 
more
 
information
 
on
 
topping-up   the  
Ad

Blue
® additive, refer to the corresponding s
ection. To
  be   able   to   start   the   engine,  
w

e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou carry out the top-up yourself, it is
essential   to   add   at   least   3.8   litres   of  
Ad

Blue
® to the additive tank.
F
or
 
more   information   on   topping-up  
t

he AdBlue
® additive, refer to the
corresponding s ection.
Instruments

35
C4-2_en_Chap01_instruments-de-bord_ed02-2015
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
The  UREA,   SERVICE   and   diagnostic   warning  
l

amps   comes   on,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message  
"

Emissions
 f
ault".
The
  alert   is   triggered   when   driving,   when  
t

he   fault   is   detected   for   the   first   time,   then  
w

hen   switching   on   the   ignition   for   subsequent  
j

ourneys,   while   the   fault   persists. During an authorised driving phase

(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed (after 3
0   miles   (50   km)   covered   with   the   permanent d

isplay   of   the   message   signalling   a   fault),   the
 S

ERVICE   and   engine   diagnostic   warning   lamps
 c

ome   on   and   the   UREA   warning   lamp   flashes,
 a

ccompanied   by   an   audible   signal   and   the
 t

emporary   display   in   the   instrument   panel   of
 "

NO   START   IN"   and   a   distance,   indicating   the
 r

emaining   range   express   in   miles   or   kilometres
 b

efore   engine   starting   is   prevented   -   (e.g.:   "NO
 S

TART   IN   350   miles"   means   "Starting   will   be
 p

revented   in   350   miles").
A
 
system
 
that
 
prevents
 
engine
 
starting
 
is
 
activated   automatically   from   650   miles   (1   100   km)   after   confirmation   of   a   fault   with   the   SCR   emissions  
c

ontrol
 
system.
 
Have
 
the
 
system
 
checked
 
by
 
a   CITROËN   dealer   or   a   qualified   workshop   as   soon   as   possible.
If
 
it
 
is
 
a
 
temporary
 
fault,
 
the
 
alert
 
d

isappears
 
during
 
the
 
next
 
journey,
 
a

fter
 
a
 
self
 
diagnosis
 
test
 
of
 
the
 
SCR
 
e

missions
 
control
 
system. While
  driving,   this   display   appears   every  3
0 seconds   while   the   fault   with   the   SCR   system  
p

ersists.
The
  alert   is   repeated   when   switching   on   the  
ig

nition.
You
  should   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   as   soon   as   possible.
Other wise, you will not be able to restart your
engine.
1
Instruments

37
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Setting the time and the time
format in the instrument
panel with the clock
On the type 1 instrument panel (without audio system),   to   adjust   the   time,   use   buttons   A and
B
  then   carry   out   the   operations   in   the   following  
o

rder:
F

p
ress buttons A and B  
s
imultaneously:
 t

he minutes   flash,
F
press A
  to   increase   the   minutes   or   B to
reduce
  the   minutes,
F

p
ress buttons A and B  
s
imultaneously:
 t

he hours flash,
F
press A to increase the hours or B to
reduce the hours, After
  approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.On
  the   type   1   instrument   panel   (without   audio  
s

ystem),   to   change   the   display   units,   use  
b

uttons A and B then carry out the operations
in   the   following   order:
F
p
ress buttons A and B  
s
imultaneously
 fo
r
 t

hree   seconds:   km/h   or   mph   flashes,
F
p
ress button A or B   to   change   the   units,
F
p
ress buttons A and B   simultaneously   to  
e

xit   from   setting   units.
After   approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.
Setting units in the instrument
panel with the clock
Setting the time and units
in the multifunction screen
The other instrument panels are associated w
ith   an   audio   system   and   a   multifunction  
s

creen.   Refer   to   the   corresponding   screens.
F

p

ress buttons A and B
 
s

imultaneously:
 
2

4 H or 12 H is displayed and flashes,
F

p

ress button A or B
 
to
 
change
 
the
 
format,
F

p

ress buttons A and B
 
simultaneously
 
to
 
e

xit
 
from
 
time
 
setting.
1
Instruments