Page 200 of 308
198
Changing a bulb
Front lamps
1. Daytime running lamps / Sidelamps (LE
Ds).
2.
D
ipped beam headlamps (H7).
3.
M
ain beam headlamps (H1).
4.
D
irection indicators (PY21W).
5.
F
ront foglamps (PS24W). In
some weather conditions (e.g. low
t
emperature or humidity), the presence
o
f misting on the internal sur face of the
g
lass of the headlamps and rear lamps
i
s normal; it disappears after the lamps
h
ave been on for a few minutes.
The headlamps have polycarbonate
l
enses with a protective coating:
F
d
o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F
u
se a sponge and soapy water or a
p
H neutral product,
F
w
hen using a high pressure washer
o
n persistent marks, do not keep
t
he lance directed towards the
l
amps or their edges for too long,
s
o as not to damage their protective c
oating a nd sea ls.
Changing a bulb should only be done
a
fter the headlamp has been switched
o
ff for several minutes (risk of serious
b
urns).
F
D
o not touch the bulb directly with
y
our fingers, use a lint-free cloth.
It
is imperative to use only anti-
ultraviolet
(UV) type bulbs to avoid
d
amaging
t
he
h
eadlamp.
Always
replace a failed bulb with a
n
ew bulb with the same type and
s
pecification.
In the event of a breakdown
Page 201 of 308
199
Daytime running lamps /
S idelamps (LEDs)
For the replacement of the light-emitting d
iodes (LEDs), contact a CITROËN dealer or a
q
ualified
w
orkshop. F
D isconnect the bulb connector.
F
R
emove the bulb and change it.
Dipped beam headlamps
F Remove the protective cover by pulling t
he tab.
F
T
ake the connector and bulb holder, then
l
ift the assembly upwards to unclip it.
F
R
emove the assembly of connector and
b
ulb holder. To
reassemble, carry out these operations in
r
everse order, positioning the alignment lug
at the top .
8
In the event of a breakdown
Page 202 of 308
200
Main beam headlamps
F Remove the protective cover by pulling t
he tab.
F
D
isconnect the bulb connector (do not
r
emove
t
he
e
arth
c
onnector
lo
cated
belo
w).
F
P
ush on the spring, then move it towards
t
he middle of the vehicle to release
t
he bulb.
F
R
emove the bulb and change it.
Direction indicators
Amber coloured bulbs, such as the direction indicators, must be replaced
w
ith bulbs of identical specifications
a
nd colour.
Rapid
flashing
of
the
direction
indicator
w
arning
lamp
(right
or
left)
indicates
the
f
ailure
of
a
bulb
on
that
side.
F
T
urn
the
bulb
holder
an
eighth
of
a
turn
a
nti-clockwise
and
extract
it.
F
R
emove
the
bulb
and
change
it.
To
reassemble,
carry
out
these
operations
in
r
everse
o
rder. To
reassemble,
carry
out
these
operations
in
r
everse
o
rder.
In the event of a breakdown
Page 206 of 308
204
Third brake lamp (LEDs)Number plate lamps (W5W)
To refit, press on the lens to clip it in place.
F
I
nsert a thin screwdriver into one of the
c
utouts in the the lens.
F
P
ush it outwards to unclip it.
F
R
emove the lens.
F
C
hange the faulty bulb.
For
the
replacement
of
the
light-emitting
d
iodes
(LEDs),
contact
a
CITROËN
dealer
or
a
q
ualified
w
orkshop.
In the event of a breakdown
Page 207 of 308
205
F Using a small flat blade screwdriver, unclip t
he console assembly surrounding the
c
ourtesy lamp.
F
R
emove the failed bulb and change it.
F
R
efit the console around the courtesy
l
amp, ensuring that it is clipped in correctly.
Courtesy lamp
with bulbs (W5W)
Courtesy lamp
with LEDs
For the replacement of the light-emitting diodes (LEDs), contact a CITROËN dealer or a
q
ualified
w
orkshop.
Boot (W5W)
F Unclip the lamp by pushing the body from b
ehind.
F
R
emove the bulb and change.
F
R
efit the lamp.
Interior lighting
8
In the event of a breakdown
