2016 Citroen C1 RHD reset

26
Indicators
Total/trip distance recorder
Press one of the buttons 1 to alternate the
distance display:
-
 
t
otal   with   "ODO"
 
(odometer)   displayed,
-
 
t
rip   with   "TRIP"
 
displayed.
To
  reset   the   trip   recorder   to   zero,   when  
i

t   is   displayed,   press   and   hold   one   of   the  
t

wo buttons 1 .
When
 
the
 
ignition
 
is
 
switched
 
on,
 
the
 
distance
 r
ecorder
 
selected
 
when
 
the
 
engine
 
was
 
s

witched
 
off
 
is
 
displayed. This
  indicates   the   quantity   of   fuel   available:
-  1/ 1  and   six   bars,   the   fuel   tank   is   full.
-
 
R
  and   one   bar,   the   fuel   tank   is   on   the  
r

eserve.
Low fuel level
Fuel gauge
At least 5 litres must be added after running   out   of   fuel.
You have approximately 5 litres remaining.
When  the   low   level   in   the   fuel   tank   is  
r

eached,   this   warning   lamp   comes   on  
i

n   the   instrument   panel,   accompanied  
b

y   an   audible   signal.
Instruments

27
Trip computer
System that gives you information on the journey in progress (range, fuel consumption…).
Information display
F Press  one   of   theses   buttons   to   display   the  v
arious   trip   computer   tabs   in   turn:
-
 
T
he   total   distance.
-
 
T
he   trip   "A".
-
 
T
he   trip   "B".
-
 
T
he   Stop   &   Start   partial   time   counter*.
-
 
T
he   Stop   &   Start   global   time   counter*.
-
 
T
he   ambient   temperature*.
-
 
T
he   current   fuel   consumption.
-
 
T
he   average   fuel   consumption.
-
 
T
he   remaining   range.
-
 
T
he   average   speed.
-
 
T
he   lighting   dimmer.
Trip reset
F When  the   trip   required   is   displayed,   press  o
ne of the two " DISP"
  buttons   for   more  
t

han   two   seconds.
Tr i p s "A"
 

and   "B"
 
are   independent   but   their  
u

se   is   identical.
For
  example,   trip   "A"
 
can   be   used   for   daily  
f

igures,   and   trip   "B"
 
for   monthly   figures.
* Depending
  on   version.
Ambient temperature
In certain situations, the ambient temperature may   only   be   displayed   after   a   delay   or   not   at   all,  
in par

ticular:
-
 
w
hen   stationary   or   at   low   speed   (less   than  
a

bout   16   mph   (25   km/h),
-
 
where  there  is  too  much  variation  in  temperature (
entering   or   leaving   a   garage,   a   tunnel...),
- during  very   short   journeys   (less   than   about  2
  minutes).
Lighting dimmer
When driving at night, this function allows certain   displays   in   the   instrument   panel   to   be  
s

witched   off   to   reduce   visual   fatigue   for   the  
d

river.
It
  operates   only   when   the   sidelamps   are   on.
F
 
W
hen   the   "Lighting   dimmer"   menu  
i

s   displayed,   press   and   hold   one   of  
t

he "DISP " buttons for access to the
adjustment.
F
 
T
hen   make   repeated   presses   on   one   of   the  
t

wo "DISP "
  buttons   to   increase   or   reduce  
t

he   brightness.
 T

he   display   flashes   to   show   you   the  
b

rightness   chosen.
1
Instruments

28
With the touch screen tablet
From the Menu page   in   the   touch   screen   tablet:
F Sel ect the " Vehicle information "
  tab.
The " Trip information "
  window   is   displayed  
w

ith   the   following   information:
-
 
"A

verage speed ",
-
 
" E

lapsed time ",
-
 
" R

ange",
-
 
t
he   current   fuel   consumption,   presented   in  
g

raphical
 fo
rm.
The " Erase "
  button   resets   the   fuel   consumption  
d

ata   in   the   touch   screen   tablet   and   the  
in

strument
 pan
el.
If your vehicle has a touch screen tablet, you
can
  view   information   on   the   current   journey.
Trip computer, a few definitions
Range
(miles or km)
T he   distance   which   can   still   be   travelled   with  
t

he   fuel   remaining   in   the   tank   (related   to   the  
a

verage   fuel   consumption   over   the   last   few  
m

iles
 (
kilometres)
 t
ravelled).
This
  value   may   vary   following   a   change  
i

n   the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
  the   fuel   level   is   low,   the   message  
"

Lo FUEL"   is   displayed.
If
  only   a   small   amount   of   fuel   is   added,   the  
r

ange   may   not   be   recalculated.
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Stop & Start time counter
(minutes / seconds or hours / minutes)
I f   your   vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter   calculates   the   time   spent   in   STOP  
m

ode   during   a   journey.
It
  resets   to   zero   every   time   the   ignition   is  
s

witched   on.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip   computer   reset.
Average speed
(mph or km/h)
C alculated   since   the   last   trip   computer   reset.
Instruments

83
Stop & Start (VTi 68 S&S engine)
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument   panel   and   the   engine  
g

oes   into   standby   automatically:
-
 
w

hen
  stationary,   in   neutral,   and   you  
r

elease   the   clutch   pedal.
Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   button.
For
  smoother   operation,   during  p
arking   manoeuvres   STOP   mode   is  n
ot   available   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   does   not   affect   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
d

uring
 
stops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 j
ams,
 
or
 
other...).
 
The
 
engine
 
restarts
 a
utomatically - START
 
mode
 
-
 
as
 
soon
 
as
 
y

ou
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place
 
i

nstantly,
 
quickly
 
and
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time counters
A partial time counter counts the periods in S TOP   mode   during   a   journey.
It
  is   displayed   in   the   trip   computer   once   the  
S

top   &   Start   is   operating.
Press one of the " DISP" buttons to return to the
previous
 d

isplay.
A
  global   time   counter   counts   the   periods   in  
S

TOP   mode   since   the   last   reset.
When
  it   is   displayed,   press   one   of  
t

he "DISP " buttons
  to   reset   the   counter.
4
Driving

188
Steering mounted controls
Change multimedia source.
P ress   and   hold:   mute   /   restore  
s

ound   from   the   radio   or   pause   media  
s

ources. Increase
  volume.
Decrease   volume.Reject
  the   incoming   call.
End
  the   call   in   progress.
Other
  than   on   a   call:   press   to   return  
t

o   the   radio   screen   or   the   clock   if   the  
r

adio   is   not   active.
Radio:
  change   to   preset   radio  
s

tations   in   ascending   order.
Media:   next   track.
Radio:   change   to   preset   radio  
s

tations   in   descending   order.
Media:   previous   track.
Accept   an   incoming   call.
Other   than   on   a   call:   press   to   open  
t

he   list   of   contacts;   a   second   press  
o

pens   the   calls   history.
A

191
Level 1Level 2 Level 3 Comment
Audio source FM FM
radio
configuration Update
  the   list   of   stations Update   the   list   to   take   account   of   reception.
List of stations Choose
  to   list   by   "Broadcaster"   or   "Alphabetic".
FM
  traffic   announcementsActivate
  or   deactivate   options.
FM
  alternative   frequencies
Change
 r

egional
 c
ode
FM
  radiotext
Presets List
  of   preset   stations.
Stations List
  of   radio   stations   received.
Manual Search for stations step by step or
automatically.
Audio source
AM Presets
List
  of   preset   stations.
Manual Search for stations step by step or
automatically.
Audio source DAB DAB radio
configuration
Update
  the   list   of   stations Update   the   list   to   take   account   of   reception.
L- B a n d
Activate
  or   deactivate   options.
DAB
  traffic   announcements
DAB
  alternative   frequencies
DAB
  radiotext
Presets List
  of   preset   stations.
Stations List
  of   radio   stations   received.
Manual Search for stations step by step or
automatically.
.
Audio and Telematics

195
Select a radio station or frequency
( refer   to   the   "Changing   a   frequency"  
s

ection). Press on "
Audio source "   to   display  t
he   carousel   of   audio   sources.
Select " FM".
Select " FM radio configuration ".
Activate/deactivate
 " C

hange of
regional code ".
Select the "
Presets"
  tab   then   make  
a

  long   press   on   one   of   the   numbered  
p

reset
 l
ocations.
Preset a station Activate/ Deactivate RDS
RDS, if activated, allows you to c
ontinue   listening   to   the   same   station  
b

y   automatic   retuning   to   alternative  
f

requencies.   However,   in   certain  
c

onditions,   coverage   of   an   RDS   station  
m

ay   not   be   assured   throughout   the  
e

ntire   country   as   radio   stations   do  
n

ot   cover   100   %   of   the   territory.   This  
e

xplains   the   loss   of   reception   of   the  
s

tation   during   a   journey.
.
Audio and Telematics

196
DAB (Digital Audio Broadcasting) radio
Display "DAB" waveband.D isplay   the   name   and   "Radiotext"   for  
t

he   current   station.
Short-cut:   access   to   the   choice   of  
a

udio   source,   telephone   functions   and  
S

martphoneLink
® mode.
S elect   the   radio   station.
Preset
 s

tations.
Short
 
press:
 
select
 
the
 
preset
 
r

adio
 s

tation.
Long
 
press:
 
preset
 
a
 
radio
 
s

tation. "Next
 m

ultiplex".
Next
  radio   station.
Display
  the   name   and   number   of   the  
"

Multiplex"   service   being   used.
"Previous
 m

ultiplex".
"DAB
 
radio
 
configuration".
Previous
 
radio
 
station. If
  the   "DAB"   radio   station   being   listened  
t

o   is   not   available,   the   "FM"   waveband  
a

ppears   in   the   screen.
Audio and Telematics