2016 Citroen C1 RHD service

152
ETG gearbox
The ETG gearbox does not require any   maintenance   (no   oil   change).
Refer
  to   the   manufacturer's   service  
s

chedule   for   the   checking   interval   for  
t

his
 c
omponent.
Brake
  wear   depends   on   the   style  
o

f   driving,   particularly   in   the   case  
o

f   vehicles   used   in   town,   over   short  
d

istances.   It   may   be   necessary   to  
Brake pads
For information on checking brake disc   wear,   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop.
Brake disc wearOnly use products recommended by CITROËN   or   products   of   equivalent  
q

uality
 an
d
 sp
ecification.
In
  order   to   optimise   the   operation   of  
u

nits   as   important   as   those   in   the  
b

raking   system,   CITROËN   selects   and  
o

ffers   very   specific   products.
After
  washing   the   vehicle,   dampness,  
o

r   in   wintry   conditions,   ice   can   form  
o

n   the   brake   discs   and   pads:   braking  
e

fficiency   may   be   reduced.   Make   light  
b

rake   applications   to   dry   and   defrost  
t

he   brakes.
Parking brake
If excessive travel or a loss of effectiveness   of   this   system   is  
n

oticed,   the   parking   brake   must   be  
c

hecked,
 e
ven
 b
etween
 t
wo services.
Checking
 
this   system   must   be   done   by   a  
C

ITROËN
  dealer   or   a   qualified   workshop.
have
 
the
 
condition
 
of
 
the
 
brakes
 
checked,
 
even
 
b

etween
 v

ehicle
 s

ervices.
Unless
 
there
 
is
 
a
 
leak
 
in
 
the
 
circuit,
 
a
 
drop
 
in
 
t

he
 
brake
 
fluid
 
level
 
indicates
 
that
 
the
 
brake
 
p

ads
 
are
 
worn. To
  avoid   damaging   the   electrical   units,  
n

ever use   a   high   pressure   jet   wash   in  
t

he   engine   compartment.
Practical information

180
Towing the vehicle
F Take  the   removable   towing   eye   stowed   in  t
he   tool   box,   under   the   boot   carpet.
F
 
U
nclip   the   plastic   cover,   by   pressing   at   the  
b

ottom.
F
 
F
ully   screw   in   the   towing   eye.
General recommendations
Observe the legislation in force in your co unt r y.
Ensure
  that   the   weight   of   the   towing  
v

ehicle   is   higher   than   that   of   the   towed  
v

ehicle.
The
  driver   must   remain   at   the   wheel   of  
t

he   towed   vehicle   and   must   have   a   valid  
d

riving
 l
icence.
When
  towing   a   vehicle   with   all   four  
w

heels   on   the   ground,   always   use   an  
a

pproved   towing   arm;   rope   and   straps  
ar

e
 p
rohibited.
The
  towing   vehicle   must   move   off   gently.
When
  towing   a   vehicle   with   the   engine  
o

ff,   there   is   no   longer   any   power  
a

ssistance   for   braking   or   steering.
In
  the   following   cases,   you   must   always  
c

all   on   a   professional   recovery   service:
-
 
v
ehicle   broken   down   on   a   motor way  
o

r   fast   road,
-
 
f
our-wheel   drive   vehicle,
-
 w

hen   it   is   not   possible   to   put   the
 g

earbox   into   neutral,   unlock   the
 s

teering,   or   release   the   parking   brake,
-
 
t
owing   with   only   two   wheels   on   the  
g

round,
-
 
w
here   there   is   no   approved   towing  
ar

m
 a
vailable...
Your
 
vehicle
 
can
 
only
 
be
 
towed
 
from
 t
he front
.
F
 
I

nstall
 
the
 
towing
 
arm.
F
 
W

ith
 
a
 
manual
 
gearbox:
 
put
 
the
 
gear
 
lever
 
i

nto
 
neutral.
F
 
W

ith
 
an
 
ETG
 
gearbox:
 
place
 
the
 
selector
 
at
 
p

osition N . Never use the radiator crossmember.
When
 
being
 
towed,
 
the
 
speed
 
limiter
 
s

hould
 
be
 
dectivated,
 
as
 
well
 
as
 
the
 
"

Active
 
City
 
Brake"
 
system
 
(if
 
fitted
 
to
 
y

our
 
vehicle).
Your
 
vehicle
 
is
 
not
 
designed
 
to
 
tow
 
a
 
trailer
 
or
 
u

se
 
a
 
towbar.
Failure
 
to
 
follow
 
this
 
advice
 
may
 
result
 
in
 
d

amage
 
to
 
certain
 
components
 
(braking,
 t
ransmission,
 
...)
 
and
 
the
 
absence
 
of
 
braking
 a
ssistance
 
when
 
the
 
engine
 
is
 
restarted.
F
 
U

nlock
 
the
 
steering
 
and
 
release
 
the
 
par

king
 b

rake.
F
 
S

witch
 
on
 
the
 
hazard
 
warning
 
lamps
 
on
 
b

oth
 
vehicles.
In the event of a breakdown

196
DAB (Digital Audio Broadcasting) radio
Display "DAB" waveband.D isplay   the   name   and   "Radiotext"   for  
t

he   current   station.
Short-cut:   access   to   the   choice   of  
a

udio   source,   telephone   functions   and  
S

martphoneLink
® mode.
S elect   the   radio   station.
Preset
 s

tations.
Short
 
press:
 
select
 
the
 
preset
 
r

adio
 s

tation.
Long
 
press:
 
preset
 
a
 
radio
 
s

tation. "Next
 m

ultiplex".
Next
  radio   station.
Display
  the   name   and   number   of   the  
"

Multiplex"   service   being   used.
"Previous
 m

ultiplex".
"DAB
 
radio
 
configuration".
Previous
 
radio
 
station. If
  the   "DAB"   radio   station   being   listened  
t

o   is   not   available,   the   "FM"   waveband  
a

ppears   in   the   screen.
Audio and Telematics

203
Level 1Level 2 Level 3 Comment
Contacts
After
  making   choices,   start   the   call.
Favourites
Call history
Enter a number Call Enter
  a   number   then   start   the   call.
Telephone/ message
configuration Connect the
telephone
Telephone
Select the services to use on the
peripheral
 d

evice.
Audio
  player
Sounds
configuration Ringtone
Choose
  settings,   activate   or  
d

eactivate
 o
ptions.
Ringtone
  volume
Incoming
  SMS/MMS   tone
Incoming
  SMS/MMS   volume
Incoming
  e-mail   tone
Incoming
  e-mail   volume
Incoming
  call   volume
Contacts/
call histor y
configuration Automatic
  transfer
Update
  telephone   contacts
Sort contacts by
Add
  favourite
Remove
  favourite
Message
configuration Display
  of   incoming   calls
Contacts/call
  history   transfer   state
Telephone
display
configuration Display
  of   incoming   calls
Contacts/call
  history   transfer   state
.
Audio and Telematics

204
Press on "Audio source "   to   display  t
he   carousel   of   audio   sources.
Select " Bluetooth audio ".
Select " Bluetooth configuration "
Activate
 
the   telephone's   Bluetooth   function  
a

nd
 
ensure   that   it   is   "visible   to   all"   (telephone  
c

onfiguration).
Select  the   telephone   in   the   list.
Select "
Connect telephone ".
Select the "
Telephone/message
configuration "   tab.
Select   your   choice.
Select the " Add"
  tab   in   the   system. Press "
OK"
  to   confirm.
If the telephone is not detected, it is recommended   that   you   switch   the   Bluetooth f

unction   on   your   telephone   off   and   then   on   again.
As a safety measure and because they require   prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
t

he   Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Pairing a Bluetooth® telephone
A waiting screen is displayed with the B
luetooth   settings   of   the   system   and   a   default  
B

luetooth PIN.
Once
  detected,   select   the   name   of   the   system  
i

n   your   telephone.
The
  system   displays   that   the   services   to   be  
u

sed   on   the   telephone   are:   "Telephone "
  and  
"A

udio player ".
The
  system   offers   to   connect   the   telephone:
-
 
w
ith   "Connect all",
-
 
w
ith   "Connect as telephone "
  (hands-free  
k

it,   telephone   only),
-
 
w
ith   "Connect as audio player "
(streaming:
  wireless   play   of   audio   files   on  
t

he
 t
elephone).
Enter
  the   PIN   code   in   the   telephone   then   accept
 t

he   connection   (depending   on   the   telephone).To
  change   the   connection   choice,  Sel
ect "Telephone ".
Audio and Telematics

205
The services available depend on the   network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  profiles   compatible   with   the   system  
a

re:   HFP,   OPP,   PBAP,   A2DP,   AVRCP,  
M

A P. This function allows the connection or
disconnection
  of   a   peripheral   device   as  
w

ell   as   the   deletion   of   a   pairing.
Automatic reconnection
When the ignition is switched on, the last telephone   connected   when   the   ignition   was  
s

witched   off   reconnects   automatically,   if   this  
c

onnection   made   had   been   activated   during   the  
p

airing   procedure   (see   previous   pages).
Connection
  is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Managing paired
telephones
Press "Telephone ".
Select " Telephone/message
configuration ".
Select " Connect telephone " to
display
  the   list   of   paired   devices.
Select " Remove "
  then   select   the   device   in   the  
l

ist
 
and
 
confirm.
.
Audio and Telematics

211
Level 1Level 2 Level 3 Comment
Configuration Bluetooth Telephone
Select the services to use on the peripheral
device.
Audio player
Add Connect
  a   new   peripheral   device.
System configuration Telephone
Select the services to use on the peripheral
device.
Audio
  player
Cancel
Remove Disconnect
  and   remove   a   peripheral   device  
f

rom   the   list.
Configuration Telephone Connect the telephone
See
  the   telephone   section.
Sounds configuration
Contacts/call history configuration
Message configuration
Telephone display configuration
Configuration Screen off Select
  this   mode   to   switch   off   the   screen,   touch  
t

he   screen   to   restore.
.
Audio and Telematics

231
Frequently asked questions
The following table groups together the answers to the most frequently asked questions concerning your audio system.
Telephone, Bluetooth®
QUESTIONANSWER SOLUTION
I
 
cannot   connect   my  
B

luetooth
 t
elephone. The
  telephone's   Bluetooth   function   may   be   switched   off   or   the  
t

elephone   may   not   be   visible. -
 
C
heck   that   your   telephone's   Bluetooth  
f

unction   is   switched   on.
-
 
C
heck   in   the   telephone   settings   that   it   is  
"

visible   to   all".
The
  Bluetooth   telephone   is   not   compatible   with   the   system.You
  can   check   the   compatibility   of   your  
t

elephone   at   www.citroen.co.uk   (services).
The
 
volume   of   the  
t

elephone
 c
onnected
 i

n
 
Bluetooth   mode   is  
ina

udible. The
  volume   depends   both   on   the   system   and   on   the   telephone. Increase   the   volume   of   the   audio   system,   to  
m

aximum   if   required,   and   increase   the   volume   of  
t

he   telephone   if   necessary.
The
  ambient   noise   level   has   an   influence   on   the   quality   of  
t

elephone
 c
ommunication. Reduce
  the   ambient   noise   level   (close   the  
w

indows,   reduce   the   booster   fan   speed,   slow  
d

own,
 ...
).
Contacts are not shown in
alphabetical
 o

rder. Some
  telephones   offer   display   options.   Depending   on   the   settings  
c

hosen,   contacts   can   be   transferred   in   a   specific   order.Modify
  the   display   setting   in   the   telephone  
d

i r e c to r y.
The
 
system   does  
n

ot
 
receive   SMS   text  
m

essages. The
  Bluetooth   mode   on   your   telephone   does   not   permit   sending  
S

MS   text   messages   to   the   system.
.
Audio and Telematics