2016 Citroen C1 run flat

140
C1_en_Chap07_info-pratiques_ed01-2016
Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.
Advice on installation
F If  you   have   to   fit   the   chains   during   a  j
ourney,   stop   the   vehicle   on   a   flat   sur face  
o

n   the   side   of   the   road.
F
 
A
pply   the   parking   brake   and   position   any  
w

heel   chocks   to   prevent   movement   of   your  
v

ehicle.
F
 
F
it   the   chains   following   the   instructions  
p

rovided   by   the   manufacturer.
F
 
M
ove   off   gently   and   drive   for   a   few  
m

oments,   without   exceeding   30   mph  
(50
  km/h).
F
 
S
top   your   vehicle   and   check   that   the   snow  
c

hains   are   correctly   tightened.
Take
 
account
 
of
 
the
 
legislation
 
in
 
force
 
i

n your country on the use of snow
chains
 
and
 
the
 
maximum
 
running
 
speed
 
a

uthorised.
The
 
snow
 
chains
 
must
 
be
 
fitted
 
only
 
t

o
 
the
 
front
 
wheels.
 
They
 
must
 
never
 
b

e
 
fitted
 
to
 
"space-saver"
 
type
 
spare
 
w

heels. Avoid
  driving   with   snow   chains   on   roads  
t

hat   have   been   cleared   of   snow,   to  
a

void   damaging   your   vehicle's   tyres   and  
t

he   road   sur face.   If   your   vehicle   is   fitted  
w

ith   alloy   wheels,   check   that   no   part   of  
t

he   chain   or   its   fixings   is   in   contact   with  
t

he   wheel   rim.
Use
 
only
 
the
 
chains
 
designed
 
to
 
be
 
fitted
 
to
 
the
 t
ype
 
of
 
wheel
 
fitted
 
to
 
your
 
vehicle:
Original
 
tyre
 
size Maximum
 
link
 
size.
165/65
 
R14 9
 
mm
165/60
 
R15
For
 
more
 
information
 
on
 
snow
 
chains,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop. It
  is   strongly   recommended   that   before  
y

ou   leave,   you   practise   fitting   the   snow  
c

hains   on   a   level   and   dry   sur face.
The
 
lane
 
departure
 
warning
 
system
 
s

hould
 
be
 
deactivated
 
when
 
driving
 
with
 
s

now
 
chains
 
fitted.
Practical information

141
C1_en_Chap07_info-pratiques_ed01-2016
Electrical energy economy mode*
System which manages the duration of use of certain functions to conserve a sufficient level of charge   in   the   battery.
After
  the   engine   has   stopped,   you   can   still   use   functions   such   as   the   audio   system, windscreen  
w

ipers,   dipped   beam   headlamps, courtesy   lamps,   etc.   for   a   maximum   combined   duration   of  
t

wenty minutes.
This
  period   may   be   greatly   reduced   if   the   battery   is   not   fully   charged.
Let
  the   engine   run   for   the   duration  
s

pecified   to   ensure   that   the   battery  
c

harge   is   sufficient.
Do
  not   repeatedly   and   continuously  
r

estart   the   engine   in   order   to   charge   the  
b

attery.
A
  flat   battery   prevents   the   engine   from  
s

tarting.
Refer
  to   the   "Battery"   section.
Switching to economy mode
Once this time has elapsed the active functions are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically next   time   the   vehicle   is   driven.
To restore the use of these functions
immediately,
  start   the   engine   and   let   it   run   for   at  
l

east   5   minutes.
*
  
O
nly   on   vehicles   with   the   "Keyless   Entry   and  
S

tarting"   system.
7
Practical information

178
C1_en_Chap08_en-cas-pannes_ed01-2016
Starting using another battery
F Start  the   engine   of   the   vehicle   with   the  g
ood   battery   and   leave   it   running   for   a   few  
m

inutes.
F
 
O
perate   the   starter   on   the   broken   down  
v

ehicle   and   let   the   engine   run.
If
  the   engine   does   not   start   straight   away,  
s

witch   off   the   ignition   and   wait   a   few   moments  
b

efore   trying   again.
Never
 
try
 
to
 
start
 
the
 
engine
 
by
 c
onnecting
 
a
 
battery
 
charger.
Never
 
use
 
a
 
24
 
V
 
or
 
higher
 
battery
 
b

o o s t e r.
First
 
check
 
that
 
the
 
slave
 
battery
 
has
 
a
 
n

ominal
 
voltage
 
of
 
12
 
V
 
and
 
a
 
capacity
 
a

t
 
least
 
equal
 
to
 
that
 
of
 
the
 
discharged
 
b

attery.
The
 
two
 
vehicles
 
must
 
not
 
be
 
in
 
contact
 
w

ith
 
each
 
other.
Switch
 
off
 
the
 
electrical
 
consumers
 
on
 
b

oth
 
vehicles
 
(audio
 
system,
 
wipers,
 
l

ighting,
 ...

).
Ensure
 
that
 
the
 
jump
 
lead
 
cables
 
do
 
n

ot
 
pass
 
close
 
to
 
moving
 
parts
 
of
 
the
 
e

ngine
 
(cooling
 
fan,
 
belts,
 
...).
Do
 
not
 
disconnect
 
the
 
(+)
 
terminal
 
when
 
t

he
 
engine
 
is
 
running. F
 
W
ait   until   the   engine   returns   to   idle   then  
d

isconnect   the   jump   lead   cables   in   the  
r

everse
 o
rder.
F
 
R
efit   the   plastic   cover   to   the   (+)   terminal,   if  
y

our   vehicle   has   one.
F
 
A
llow   the   engine   to   run   for   at   least  
3

0 minutes,   by   driving   or   with   the   vehicle  
s

tationary, so that the battery reaches an
adequate
  state   of   charge.
When
 
your
 
vehicle's
 
battery
 
is
 
discharged,
 
the
 
e

ngine
 
can
 
be
 
started
 
using
 
a
 
slave
 
battery
 
(

external
 
or
 
on
 
another
 
vehicle)
 
and
 
jump
 
lead
 
c

ables
 
or
 
a
 
battery
 
booster.
F
 
R

aise
 
the
 
plastic
 
cover
 
on
 
the
 
(+)
 
terminal,
 
i

f
 
your
 
vehicle
 
has
 
one.
F
 
C

onnect
 
the
 
red
 
cable
 
to
 
the
 
positive
 
t

erminal
 
(+)
 
of
 
the
 
flat
 
battery
 
A
 
(at
 
t

he
 
metal
 
elbow)
 
then
 
to
 
the
 
positive
 
t

erminal (+)
 
of
 
the
 
slave
 
battery
 
B or the
b o o s t e r. F
 
C
onnect   one   end   of   the   green   or   black  
c

able   to   the   negative   terminal   (-)   of   the  
s

lave battery B   or   the   booster   (or   earth  
p

oint   on   the   other   vehicle).
F  
C
onnect  
t
he  
o
ther  
e
nd  
o
f  
t
he  
g
reen  
o
r  
b
lack  
c

able to the earth point C   on   the   broken  
d

own   vehicle.
In the event of a breakdown