2016 Citroen C1 instrument panel

37
C1_en_Chap02_ouvertures_ed01-2016
Changing the battery of
the electronic key
Battery ref.: CR2032 / 3 volts.
W hen   replacement   of   the   battery   is  
n

eeded,   this   warning   lamp   comes   on  
i

n   the   instrument   panel.
F
 
U
nclip   the   cover   using   a   small   screwdriver  
a

t   the   cutout.
F
 
R
emove   the   cover.
F
 
R
emove   the   protective   battery   holder,  
p

ulling   it   upwards.
F
 
R
emove   the   discharged   battery   from   its  
h

ousing.
F
 
F
it   the   new   battery   into   its   housing  
o

bserving   the   original   direction   of   fitment.
F
 
R
efit   the   battery   holder.
F
 
C
lip   the   cover   onto   the   casing.
Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control / Electronic key
These high frequency devices are sensitive systems; do not handle them while in your pocket   as   there   is   a   risk   of   unlocking   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   or   electronic   key   out   of   range  
a

nd   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote  
c

ontrol   would   have   to   be   reinitialised.
Locking the vehicle
As a safety precaution, never leave children alone in the vehicle, except for a very short period.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch,   or   take   the   electronic  
k

ey   with   you   when   leaving   the   vehicle.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.
Driving
  with   the   doors   locked   may   make   access   to   the   passenger   compartment   by   the  
e

mergency   services   more   difficult   in   an   emergency.
2
Access

73
C1_en_Chap04_conduite_ed01-2016
Starting using the
electronic key
With the first press on the "S TA R T/
STOP "
  button,   this   indicator   lamp f

lashes   slowly   in   the   instrument   panel.Depending
  on   the   ambient   temperature,  
e

ach   attempt   at   starting   can   take   up   to  
a

round   30   seconds.   During   this   period,  
d

o   not   press   the   "START/STOP " button
again,
  or   release   the   clutch   pedal   or  
b

rake   pedal   (depending   on   the   type   of  
g

earbox).
After
  this   period,   if   the   engine   has   not  
s

tarted,   press   the   "START/STOP "
button
  again   for   another   attempt   at  
s

tarting. If
  one   of   the   starting   conditions   is  
n

ot   met,   the   "Keyless   Entry   and  
S

tarting"   system   indicator   lamp   flashes  
i

n   the   instrument   panel.   In   some  
c

ircumstances,   it   is   necessary   to  
t

urn   the   steering   wheel   slightly   while  
p

ressing   the   "
START/STOP " button to
assist   unlocking   of   the   steering.
For vehicles fitted with a manual gearbox:
F
 
W

ith
 
the   electronic   key   inside   the   vehicle,  
p

ut
 
the   gear   lever   into   neutral   and   fully  
d

epress   the   clutch   pedal. The
  presence   of   the   electronic   key   in  t
he   vehicle   is   essential   for   switching  
o

n   the   ignition   and   starting   only.   Once  
t

he   engine   has   started,   make   sure   that  
t

he   electronic   key   remains   with   the  
v

ehicle   until   the   end   of   the   journey:  
o

ther wise   you   would   not   be   able   to   lock  
t

he vehicle.
F
 
P
ress   and   release   the   "S TA R T/
STOP "
  button.
This
  indicator   lamp   comes   on   in   the  
in

strument
 pan
el. For vehicles fitted with an ETG gearbox:
F
 
W
ith   the   electronic   key   inside   the   vehicle,  
p

ut   the   gear   selector   at   N   and   press   the  
b

rake
 ped
al.
This   indicator   lamp   comes   on   in   the  
in

strument
 pan
el.
F  
P
ress   and   release   the   "
S TA R T/
STOP "   button.
4
Driving

74
C1_en_Chap04_conduite_ed01-2016
There is an audible signal when the driver's door is   opened   and   the   vehicle   is   in   "ACC "
  mode.
If
  the   vehicle   is   not   immobilised,   the  
e

ngine   will   not   stop.
Switching off using the
electronic key
F Immobilise
  the   vehicle.
F  W ith   a   manual   gearbox:   put   the   gear   lever  
i

nto   neutral.
F
 
W
ith   an   ETG   gearbox:   place   the   gear  
s

elector at N .
F
 
W
ith   the   electronic   key   inside  
t

he vehicle, press the " S TA R T/
STOP "
  button.
The
  engine   stops.
The
  steering   locks   when   a   door   is   opened   or   on  
l

ocking   the   vehicle.
F

P
ress the "START/STOP " button
again
  to   change   to   "OFF "
  mode.
Emergency starting
When the electronic key is in the recognition   zone   and   your   vehicle  
d

oes   not   start   after   pressing   the  
"ST

ART/STOP "
  button,   this   warning  
l

amp   flashes   in   the   instrument   panel.
F
 
W

ith
 
a   manual   gearbox:   put   the   gear   lever  
i

nto
 
neutral.
F
 
W

ith
 
an   ETG   gearbox:   place   the   selector  
l

ever at N . F
 
P
ut   the   corner   of   the   electronic   key,   where  
t

he   indicator   lamp   is   located,   in   contact  
w

ith the "
START/STOP "   button.
 T

here   is   an   audible   signal   when   the  
e

lectronic   key   is   recognised;   the   vehicle  
c

hanges   to   "
ON "   mode.
F  
W
ith   a   manual   gearbox:   press   the   clutch  
p

edal   fully   down.
F  
W
ith   an   ETG   gearbox:   press   the   brake  
ped

al.
F  
C
heck   that   the   "Keyless   Entry   and  S
tarting"   indicator   lamp   comes   on   in   green  i
n   the   instrument   panel.
F

P
ress the "START/STOP "
  button.
 T

he   engine   starts.
If
  the   engine   does   not   start,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
Driving

77
C1_en_Chap04_conduite_ed01-2016
Gear selector
ETG electronic gearbox
The five-speed ETG electronic gearbox offers a choice between the ease of automated operation o r the pleasure of manual gear changing.
R.
 R
everse:   with   your   foot   on   the   brake   pedal,  
m

ove   the   gear   selector   to   the   right   then  
f

or ward   to   select   this   position.
N.
 N

eutral:   with   your   foot   on   the   brake   pedal,  
s

elect   this   position   to   start   the   engine.
E.
 
A
utomatic   (Easy)   mode:   move   the   gear  
s

elector   back   to   select   this   mode.
M.
 M

anual   mode   with   sequential   gear  
c

hanging:   move   the   gear   selector   back  
t

hen   to   the   left   to   select   this   mode.Press
  behind   the   "+"
 s
teering
 m

ounted   control   paddle   to   change   up.
Steering mounted control paddles
The position of the gear selector (R , N, E or M )  i
s   displayed   in   the   instrument   panel.
In
  automatic   (Easy)   mode,   when   you  
t

emporarily   take   control   of   gear   changing,  
t

he   gear   engaged   is   also   displayed   in   the  
in

strument
 pan
el.
Display in the instrument panel
Press behind the "-"  steering  m
ounted   control   paddle   to   change  
d

own.
The
  steering   mounted   control   paddles  
c

annot   be   used   to   select   neutral   or   to  
e

ngage   or   come   out   of   reverse   gear.
4
Driving

80
C1_en_Chap04_conduite_ed01-2016
The vehicle can be stopped whatever the position   of   the   gear   selector   (N , E or R ).
However,
  there   is   an   audible   signal   on   opening  
t

he   driver's   door   if   the   gear   selector   is   not   at  
p

osition N .
Switching off
When the vehicle is stopped with the e
ngine   running,   always   put   the   gear  
s

elector to neutral N .
There
  is   a   continuous   audible   signal  
i

f   you   turn   the   ignition   switch   to   "OFF "
with
  the   vehicle   in   2
nd, 3rd, 4th or 5th ge a r.
In
 
this
 
case
 
return
 
the
 
ignition
 
switch  
t

o " ON ",
 
move
 
the
 
gear
 
selector
 
to  
p

osition


N , then to position E , M or R,
then
 
turn
 
the
 
ignition
 
switch
 
to
 
" OFF ".
On
 
a
 
slope,
 
use
 
the
 
brakes
 
to
 
i

mmobilise
 
the
 
vehicle
 
and
 
place
 
the  
g

ear
 
selector
 
in
 
position
 
N , E or R . With
  the   ignition   on,   illumination  
o

f   this   warning   lamp   indicates   a  
g

earbox   fault.
Contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating faults
In all cases, it is essential
that you
apply the parking brake  to   immobilise  
t

he   vehicle.
Before
  doing   anything   under   the  
b

onnet,   check   that   the   gear   selector   is  
i

n neutral N   and   the   parking   brake   is  
a

pplied.
Limits of operation
On a gradient, or when hill start assist is activated, n ever hold the vehicle using the
accelerator :
  you   could   damage   the   clutch.
In
  these   situations   there   is   an   audible   signal.
F
 
M
ove   the   gear   selector   to   position   N.
F
 
W
ait   15   minutes   to   allow   the   clutch   to   cool  
d

own   before   setting   off. -
 
c
heck   that   the   ignition   switch   is   at   the  
"
O
N
"

position,
-  
p
lace   the   gear   selector   at   N
,   then   move   it  
t

o E
, M or R .
If 1   is   flashing   in   the   instrument   panel:
-  p lace   the   gear   selector   at   E or M
, then
move   it   to   N.
If R
  is   flashing   in   the   instrument   panel:
-
 
p
lace   the   gear   selector   at   R,
  then   move   it  
t

o N.
If
N is   flashing   in   the   instrument   panel
 a

ccompanied   by   an   audible   signal   for   a   long   time:
Driving

83
C1_en_Chap04_conduite_ed01-2016
Stop & Start (VTi 68 S&S engine)
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument   panel   and   the   engine  
g

oes   into   standby   automatically:
-
 
w

hen
  stationary,   in   neutral,   and   you  
r

elease   the   clutch   pedal.
Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   button.
For
  smoother   operation,   during  p
arking   manoeuvres   STOP   mode   is  n
ot   available   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   does   not   affect   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time counters
A partial time counter counts the periods in S TOP   mode   during   a   journey.
It
  is   displayed   in   the   trip   computer   once   the  
S

top   &   Start   is   operating.
Press one of the " DISP" buttons to return to the
previous
 d

isplay.
A
  global   time   counter   counts   the   periods   in  
S

TOP   mode   since   the   last   reset.
When
  it   is   displayed,   press   one   of   the  
"D

ISP " buttons
  to   reset   the   counter.
4
Driving

85
C1_en_Chap04_conduite_ed01-2016
At any time, press this button to deactivate the system.
Manual deactivation /
reactivation
If the system has been deactivated in S TOP mode,   the   engine   restarts   immediately.
The
  system   is   reactivated   automatically   at  
e

very   new   engine   start   by   the   driver.
Press
  this   button   again.
The
  system   is   active   again;   this   is   confirmed   by   the
 i

ndicator   lamp   going   off   in   the   instrument   panel.
Deactivation
  is   confirmed   by   the  
i

llumination   of   this   indicator   lamp   in  
t

he   instrument   panel.
Before
 
doing
 
anything
 
under
 
the
 
b

onnet,
 
deactivate
 
the
 
Stop
 
&
 
Start
 
s

ystem
 
to
 
avoid
 
any
 
risk
 
of
 
injury
 
r

esulting
 
from
 
automatic
 
operation
 
of
 
S

TART
 
mode.
Maintenance
The Stop & Start system requires a 12 V b
attery   of   a   special   specification   and  
t

echnology.
All
  work   on   this   type   of   battery   must   be  
d

one   only   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
For
  more   information   on   the   12   V  
b

attery,   refer   to   the   corresponding  
s

ection.
4
Driving

86
C1_en_Chap04_conduite_ed01-2016
The speed limiter cannot, in any circumstances,   replace   the   need   to o

bserve   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.
Speed limiter (PureTech 82 engine)
The speed limiter is switched on  manually: t
his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
System
  which   prevents   the   vehicle   from   exceeding   the   speed   programmed   by   the   driver.Steering mounted controls
The controls are grouped together on this c
ontrol   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 S

peed   limiter   on   /   pause:   by   pulling   the  
c

ontrol   stalk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   mode   selection   indication.
6.
 S

peed   limiter   on   /   pause   indication.
7.
 S

peed   value   setting.
The
 
programmed
 
speed
 
remains
 
in
 
the
 m

emory
 
when
 
the
 
ignition
 
is
 
switched
 
off.
Driving