2016 CITROEN C-ELYSÉE audio

01
C-elysee_en_Chap12b_RDE1_ed01-2016
FIRST STEPS
228Selection   of   source:
FM1,   FM2,  
AM,
  CD,  
AUX.
Adjust
  audio   settings:
sound   ambience,   treble,   bass,  
loudness,

  left/right   balance,  
automatic

  volume.
Abandon   the   current  
operation.
Go

  up   one   level   (menu   or  
folder).
Automatic
  search   for   a   lower/
higher   radio   frequency.
Select   the   previous/next   CD  
track.
Navigation

  in   a   list.
Press   and   hold:   fast   forward  
or

  backward.
Eject   CD.
Manual search step by step
for   a   lower/higher   radio  
frequency

.
Select   the   previous/next  
MP3

  track.
Navigation   in   a   list.Open   the   main  
menu.
Select
  a   preset   radio   station.
Radio:   long   press:   preset   a   radio  
station.
Display
  the   list   of   stations   received,  
the

  CD/MP3   tracks   or   MP3   folders.
Long   press:   update   the   list   of  
stations

  received.
On   /   Off   and  
volume

  adjustment.

02
229
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
Press the SRC/BAND button several
times   in   succession   and   select   the   FM1,  
FM2

  or  
AM
  waveband.
Press a button to listen to the
corresponding
  preset   station. Press
  to   change   to   the   next   or   previous  
letter

  (e.g.  
A,
  B,   D,   F,   G,   J,   K,   ...).
Radio
Select the desired radio station then confirm  by   pressing  OK .
Selecting a station
Make  a   long   press   on  
LIST to construct
or

  update   the   list   of   stations;   the   sound  
is

  interrupted   temporarily.
The
 
external
 
environment
 
(hills,
 
buildings,
 
tunnels,
 
basement
 
car
 
parks)

 
may
 
block
 
reception,
 
including
 
in
 
RDS
 
mode.
 
This

 
is
 
a
 
normal
 
ef

fect
 
of
 
the
 
way
 
in
 
which
 
radio
 
waves
 
are
 
transmitted
 
and
 
does
 
not
 
indicate

 
any
 
failure
 
of
 
the
 
audio
 
equipment.
Selecting a preset station Make
 
a
 
long
 
press
 
on
 
a
 
button
 
to
 
preset

 
the
 
station
 
being
 
listened
 
to.
 
The

 
name

 
of
 
the
 
station
 
is
 
displayed
 
and
 
an
 
audible

 
signal
 
confirms
 
that
 
it
 
has
 
been
 
preset. Press

LIST
 to   display   the   list   of   stations  
received,

  in   alphabetical   order.

02
230
C-elysee_en_Chap12b_RDE1_ed01-2016
RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,   in  
certain

  conditions,   coverage   by   an   RDS   station   may   not   be   assured  
throughout

  the   country   as   radio   stations   do   not   cover   100   %   of   the  
territory

.  
This
  explains   the   loss   of   reception   of   the   station   during   a  
journey

.
AUDIO
RDS
Press MENU.
Select "Radio"
  then   confirm   by  
pressing

 
OK
.
Select "RDS"
 

then   confirm   by  
pressing

 
OK
.
Select "On" or "Off" to switch RDS on
or
  off,   then   confirm   with   OK to save the
selection.
Receiving TA messages
The TA  (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a   radio  
station

  transmitting   this   type   of   message.   When   a   traffic   report   is  
transmitted,

  the   current   audio   source   (Radio,   CD,   ...)   is   interrupted  
automatically

  to   play   the  
T
A
 
message.   Normal   playback   of   the   audio  
source

  resumes   at   the   end   of   the   transmission   of   the   message.
Select "Radio"
  then   confirm   by  
pressing

 
OK
.
Select "Traffic TA"
  then   confirm   by  
pressing

 
OK
.
Select "On" or "Off" to switch on or off
the
  reception   of   traffic   announcements  
then

  confirm   by   pressing  
OK
to save
the
  selection.
Press MENU to switch on or off the
reception
  of   traffic   announcements.

02
231
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
Radio Text  is   information   transmitted   by   the   radio   station   on   the  station
  or   on   the   song   being   played.
Press MENU.
Select "Radio" or "Media"
  (depending  
on

  the   current   sound   source)   then  
confirm

  by   pressing  
OK
.
Select "RADIO TEXT"
  then   confirm   by  
pressing

 
OK
.
Display RADIO TEXT Audio CD
Insert 12 cm diameter circular compact discs only.
Some   anti-pirating   systems,   on   original   discs   or   CDs   copied   using   a  
personal

  recorder,   may   cause   faults   which   are   no   reflection   on   the  
quality

  of   the   original   player.
Without
  pressing   the   EJECT button, insert a CD in the player, play
begins
  automatically.
To
  play   a   disc   which   has   already   been  
inserted,

  press   the   SRC/BAND button
several
  times   in   succession   until   "CD" is
displayed.
Press one of the buttons to select a
track
  on   the   CD.
Press
  and   hold   one   of   the   buttons   for  
fast

  forward   or   backward.
Playing a CD
Select "On" or "Off"
 
to
 
switch
 
radio
 
text

 
on
 
or
 
off,
 
then
 
confirm
 
with
 
OK to
save
 
the
 
selection.

02
232
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
CD
Information and adviceOn   a   given   disc,   the   CD   player   can   read   up   to   255   MP3   files   spread  
over

  8   levels.   However,   it   is   advisable   to   keep   to   a   limit   of   two   levels  
to reduce

  the   access   time   before   the   CD   is   played.
The
  folder   structure   is   not   observed   during   playback.
In
  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   standards   ISO   9660   level   1.2   or   Joliet.
If
  the   disc   is   recorded   in   another   format,   it   may   not   be   played   correctly.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  a   given   disc,   with   as   low   a   speed   as   possible   (4x   maximum)   for  
optimum

  sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.
The

  audio   system   can   only   play   files   with   ".mp3",   ".wma"   or   ".wav"  
extensions.
A
 

high   compression   level   can   degrade   the   sound   quality.
Playlists
  accepted   are   types   .m3u   and   .pls.
The
  system   can   recognise   up   to   5   000   files   in   500   folders   on   8   levels.
It
  is   advisable   to   restrict   file   names   to   20   characters   without   using  
special

  characters   (e.g.   "   ? ;   ù)   to   avoid   any   playing   or   displaying  
problems.

02
233
C-elysee_en_Chap12b_RDE1_ed01-2016
CD
AUDIO
Playing a compilationInsert   an   MP3   compilation   on   the   CD   player.
The
  system   constitutes   playlists   (in   temporary   memory)   which   may  
take

  between   a   few   seconds   to   several   minutes.
To
  play   a   disc   already   inserted,  
press

SRC/BAND
 
several   times   in  
succession until "CD" 

is   displayed. Press one of the buttons to select the
previous
  or   next   track.
Press one of the buttons to select the
previous
  or   next   folder   depending   on   the  
classification

  selected.
Press
  and   hold   one   of   the   buttons   for  
fast

  forward   or   backward.

02
234
C-elysee_en_Chap12b_RDE1_ed01-2016
Select a line in the list.
Jump   a   page. Go
  back   one   level.
Select
  a   folder   /Playlist.
Start   play   of   the   track   selected.
Go   back   to   the   first   level   to   select   the   track   classification:
-
 
By
  Folders:   all   folders   containing   audio   files   recognised   on   the  
peripheral,

  in   alphabetical   order,   ignoring   the   folder   structure.
-
 
By
  Playlist:   depending   on   the   playlists   saved.
Press LIST
 

to   display   the   compilation  
folder

  structure.
AUDIO

02
235
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
Auxiliary socket (AUX)
Auxiliary JACK socket
Connect  the   portable   device   to   the   auxiliary   Jack   socket   using   a  
suitable

  cable   (not   supplied).
The
  auxiliary   Jack   socket   permits   the   connection   of   a   portable  
device.
Press the

SRC/BAND button
successively
  and   select  
"AUX". First

  adjust   the   volume   on   your   portable   device.
Then
  adjust   the   volume   of   the   audio  
system.
The

  display   and   management   of   controls   is   on   the  
portable

  device.