2016 CITROEN C-ELYSÉE ignition

22
Warning / indicator lampStateCause Action / Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
fixed,
  on   switching  
o

n   the   ignition,  
a

ssociated   with   the  
S

ERVICE   and   engine  
d

iagnostic   warning  
lam

ps,
 a
ccompanied
 b

y   an   audible   signal  
a

nd   a   message.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust   emissions  
r

eturn   to   normal   levels.
flashing,
 o

n
 s
witching
 o

n   the   ignition,
 a

ssociated   with   the
 S

ERVICE   and   engine
 d

iagnostic
 w
arning
 lam

ps,
 a
ccompanied
 b
y
 a

n   audible   signal   and
 a

  message   indicating
 t

he
 r
emaining
 d
riving
 ra

nge.After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout delay, to avoid a breakdown .
flashing,
  on   switching  
o

n   the   ignition,  
a

ssociated   with   the  
S

ERVICE   and   engine  
d

iagnostic   warning  
lam

ps,
 a
ccompanied
 b

y   an   audible   signal  
a

nd   a   message.You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must call on a
CITROËN
  dealer   or   a   qualified   workshop.
Monitoring

23
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Service indicator
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
System
 
which
 
informs
 
the
 
driver
 
when
 
the
 
n

ext
 
service
 
is
 
due,
 
in
 
accordance
 
with
 
the
 
ma

nufacturer's
 ser

vicing
 s

chedule.
Between 600 miles (1 000 km) and 1 800 miles
(3 000 km) remain before the next service is due
For 5 seconds after the ignition is switched on, t
he   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   739   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 400   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
1
Monitoring

24
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes   to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
For
  BlueHDi   Diesel   versions,   this   alert  
m

ay   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Service indicator
zero reset
After each service, the service indicator must b
e   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears.
5
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 t
he
 
distance
 
recorder
 
resumes
 
its
 
normal
 
ope

ration.
 T

he spanner remains on .The
 
distance
 
remaining
 
may
 
be
 
w

eighted
 
by
 
the
 
time
 
factor,
 
depending
 
o

n
 
the
 
driving
 
conditions.
Therefore,
 
the
 
spanner
 
may
 
also
 
come
 
o

n
 
if
 
you
 
have
 
exceeded
 
the
 
period
 
s

ince
 
the
 
last
 
service,
 
indicated
 
in
 
the
 
ma

nufacturer's
 ser

vice
 s

chedule.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
s

panner
 
may
 
also
 
be
 
brought
 
on
 
earlier
 
t

han
 
expected,
 
depending
 
on
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
(

depending
 
on
 
the
 
country
 
of
 
sale).
The
 
rate
 
of
 
deterioration
 
of
 
the
 
engine
 o
il
 
depends
 
on
 
the
 
driving
 
conditions
 
in
 w
hich
 
the
 
vehicle
 
is
 
used.
Monitoring

25
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Retrieving the service
information
You can access the service information at any   time.
F
 
P
ress   the   trip   distance   recorder   zero   reset  
b

utton.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.
System
  which   measures   the   total   distance  
t

ravelled   by   the   vehicle   during   its   life.
The
  total   and   trip   distances   are   displayed   for  
t

hirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Total distance recorder
System which measures a distance travelled during   a   day   or   other   period   since   it   was   reset  
t

o   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Trip distance recorder
Distance recorders
1
M

35
C-elysee_en_Chap02_ouvertures_ed01-2016
If the problem persists, contact a CITROËN   dealer   as   soon   as   possible.
If the battery is flat, you are
informed
 
by
 
illumination
 
of
 
this
 
w

arning
 
lamp,
 
an
 
audible
 
signal
 
a

nd
 
a
 
message
 
in
 
the
 
screen.
Changing the battery
F Remove
  the   flat   battery   from   its   location.
F F it the new battery into its location
observing
  the   original   direction   of   fitment.
F
 
C
lip   the   cover   onto   the   casing.
In
 
the
 
event
 
of
 
a
 
fault
 
with
 
the
 
remote
 
control,
 
y

ou
 
can
 
no
 
longer
 
unlock,
 
lock
 
or
 
locate
 
your
 
v

ehicle.
F
 
F

irst
 
of
 
all,
 
use
 
the
 
key
 
in
 
the
 
lock
 
to
 
unlock
 
o

r
 
lock
 
your
 
vehicle.
F
 
T

hen,
 
reinitialise
 
the
 
remote
 
control.
Fault with the remote
control
Reinitialisation
F Switch
  off   the   ignition   and   remove   the  ig
nition k ey.
F
 
P
ress   the   closed   padlock   immediately  
for
  a   few   seconds.
F
 
T
urn   the   key   to   position   2 (Ignition on).
F
 
S
witch   off   the   ignition   and   remove   the   key  
f

rom   the   ignition   switch.
The
  remote   control   is   fully   operational   again.Battery
  ref.:   CR2032   /   3   volts.
F
 
U
nclip   the   cover   using   a   small   screwdriver  
a

t   the   cutout.
F
 
L
ift   off   the   cover.
2
Access

36
C-elysee_en_Chap02_ouvertures_ed01-2016
Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket   as   there   is   a   possibility   that   it   may   unlock   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of  
y

our   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote   control   would   have  
t

o   be   reinitialised.
No
  remote   control   can   operate   when   the   key   is   in   the   ignition   switch,   even   when   the   ignition  
i

s   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency   services   more   difficult   in   an   emergency.
As
  a   safety   precaution,   never   leave   children   alone   in   the   vehicle,   except   for   a   very   short  
p

eriod.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch   when   leaving   the   vehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause m alfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.Do
  not   throw   the   remote   control  
b

atteries   away,   they   contain   metals  
w

hich   are   harmful   to   the   environment.
Take   them   to   an   approved   collection  
po

int.
Ac

37
C-elysee_en_Chap02_ouvertures_ed01-2016
System which p rotects  a nd  p rovides  a  d eterrent  a
gainst   theft   and   break-ins.   It   provides  
p

erimeter   protection   as   well   as   a   self-protection  
f

unction.
Alarm
Perimeter protection
The system checks for opening of the vehicle.
T he   alarm   is   triggered   if   anyone   tries   to   open   a  
d

oor,   the   boot,   the   bonnet...
Self-protection function
The system checks for the putting out of service   of   its   components.
The
  alarm   is   triggered   if   the   battery,   the  
c

entral control or the wires of the siren
are
  put   out   of   service   or   damaged.
Locking the vehicle with
alarm
Activation
F Switch off the ignition and get out of the vehicle.
F Press  the   locking   button   on   the  r
emote   control.
The
 
perimeter   protection   is   activated   5   seconds  
a

fter
 
pressing   the   locking   button   on   the   remote  
c

ontrol.
If
 
an
 
opening   (door,   boot...)   is   not   closed  
f

ully,
 
the
 
vehicle   is   not   locked   but   the   alarm   is  
a

ctivated. F
 
P
ress   the   unlocking   button   on  
t

he   remote   control.
Deactivation
The alarm is deactivated: the indicator   lamp   goes   off.
The
  alarm   is   activated:   a   indicator  
l

amp   in   the   switch   panel   to   the  
left   of   the   steering   wheel   flashes  
o

nce   per   second.
For
 
all
 
work
 
on
 
the
 
alarm
 
system,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
2
Access

38
C-elysee_en_Chap02_ouvertures_ed01-2016
Triggering of the alarm Locking the vehicle without activating the alarm
F Lock  the   vehicle   using   the   key.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.
Faults
This is indicated by sounding of the siren 
a nd   flashing   of   the   direction   indicators   for  
thirty
  seconds.
When
  the   ignition   is   switched   on,   fixed  
i

llumination   of   the   indicator   lamp   indicates   a  
f

ault   with   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
When
  the   vehicle   is   unlocked   using  
t

he   remote   control,   rapid   flashing  
o

f   the   indicator   lamp   informs   you  
t

hat   the   alarm   was   triggered   during  
y

our   absence.   When   the   ignition  
i

s   switched   on,   this   flashing   stops  
i

mmediately.
Access