2016 BUICK LACROSSE window

4
Remote Keyless Entry Transmitter (Key Fob)
Unlock
Press to unlock the driver’s door. Press again to unlock all doors.
Lock
Press to lock all doors. The driver’s door will not lock when open if the Unlocked Door Anti Lock Out feature is turned on. See the Vehicle Settings menu.
Vehicle Locator/ Panic Alarm
Press and release to locate your vehicle. The turn signal lamps will flash and the horn will sound.
Press and hold to activate the alarm. The turn signal lamps will flash and the horn will sound until the button is pressed again or the ignition is turned on.
Trunk Release
Press and hold to unlock the trunk.
Remote Vehicle StartF
Press and release the Lock button and then press and hold the button until the turn signal lamps flash to start the engine from outside the vehicle. After entering the vehicle, turn on the ignition using the key or ENGINE STOP/START buttonF.
• During a remote start, the engine will run for 10 minutes.
• Press and hold the button until the parking lamps turn off to cancel a remote start.
Note: To change the remote lock, unlock, and remote start settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
If the remote start heated seat option is selected, the heated seat button indicators will not illuminate and the temperature of the unoccupied heated seat may be reduced during the remote start. The heated seat turns off when the ignition is turned on.
See Keys, Doors and Windows in your Owner Manual.
Door Locks/Trunk Release
Door Locks
To lock or unlock all doors, press the power door Lock/ Unlock button, located on the interior panels of the front doors.
Note: To change the lock and unlock setting, go to Power Door Locks in the Vehicle Settings menu.
To open a locked door from inside, pull the inside door handle to unlock the door and then pull the door handle again to open the door.
Trunk Release
To open the trunk, with the vehicle unlocked, press the Trunk Release button on the driver’s door, press the touchpadF above the license plate or use the Trunk Release button on the key fob.
See Keys, Doors and Windows in your Owner Manual.
F Optional equipment

5
Keyless Access SystemF
The Keyless Access System enables operation of the doors and ignition without remov-ing the key fob from a pocket or purse. The key fob must be within three feet of the door being unlocked or the trunk.
Keyless Unlocking
With the key fob within range:
Press the lock button on the driver’s door handle to unlock the driver’s door; press it again within five seconds to unlock all doors.
Press the lock button on a passenger door handle to unlock all doors.
Press the touchpad above the license plate to open the trunk.
Keyless Locking
With the ignition off, the key fob out of the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately.
If Passive Locking is turned on, all doors will lock automatically after a short delay once all doors are closed.
Note: To change the door lock and unlock settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Keyless Access StartF
Starting the Engine
With the vehicle in Park or Neutral, press the brake pedal and then press and hold the ENGINE START/STOP button to start the engine.
Note: The key fob must be in the vehicle to turn on the ignition. If the key fob battery is weak, place the key fob in the pocket in the center console storage compartment to enable the engine to start. Replace the key fob battery as soon as possible.
Stopping the Engine
Shift to Park and press the ENGINE START/STOP button to turn off the engine.
Accessory
With the engine off and the brake pedal not applied, press the ENGINE START/STOP button to place the ignition
system in the accessory position.
See Driving and Operating in your Owner Manual.
F Optional equipment
2015 model shown

7
Climate Controls
Driver’s Heated/Ventilated Seat ControlsF

Power On/Off
A/C Air Conditioning Control
AUTO Automatic Operation
Recirculation Mode
Automatic Operation
1. Press AUTO.
2. Set the temperature for the driver and front passenger. The system automatically
controls the fan speed, air delivery, air conditioning and recirculation to reach the set temperature. Allow time for the system to reach the desired temperature.
If the air delivery mode or fan speed is manually adjusted, automatic operation is turned off.
Note: When the recirculation mode is used without air conditioning, the air humidity increases and the windows may fog.
See Climate Controls in your Owner Manual.
Front Passenger’s Heated/Ventilated Seat ControlsF
SYNCF Link passenger’s temperature setting to driver’s temperature setting
Driver’s Temperature Control
Air Delivery Mode Controls
Defrost Mode
Passenger’s Temperature Control
Fan Speed Control/Off
Rear Window/ Outside Mirror Defogger
F Optional equipment