
Addendum
thereof:  “BMW recommends that you have  
the maintenance carried out by your service 
center.” 
10. At page 172, under the heading “Tire infla- 
tion specifications,” the sentence begin-
ning, “Tire inflation pressure specifications 
apply to approved tire sizes …” should be 
disregarded. 
11. At page 176, under the heading: “Mount- 
ing,” the paragraph beginning, “Have 
mounting and balancing …” should be dis-
regarded and the following text should be 
read in lieu thereof: “BMW recommends 
that you have mounting and balancing per-
formed by your service center or a tire 
mounting specialist.” 
12. At page 176, under the heading: “Approved  
wheels and tires,” the term “Approved” 
should be disregarded and in lieu thereof, 
the term “Recommended” should be read 
in its place. In addition, the text of that sec-
tion should be disregarded and the follow-
ing text should be read in lieu thereof:  
The manufacturer of your vehicle strongly  
suggests that you use wheels and tires that 
have been recommended by the vehicle 
manufacturer for your vehicle type; other-
wise, for example, despite having the same 
official size ratings, variations can lead to 
body contact and with it, the risk of severe 
accidents.  
The manufacturer of your vehicle does not  
evaluate non-recommended wheels and 
tires to determine if they are suitable for use 
on your vehicle. 
13. At page 180, under the heading: “Snow  
Chains,” the text should be disregarded and 
the following text should be read in lieu 
thereof:  
Only certain types of fine-link snow chains  
have been tested by the manufacturer of 
your vehicle and are determined by the 
manufacturer of your vehicle to be road safe 
and are recommended by the manufacturer 
of your vehicle.  
Information about recommended snow  
chains is available from a service center. 
14. At page 181, under the heading “Hood,” the  
sentence beginning, “If you are unfamiliar” 
should be disregarded. 
15. At page 185, under the heading: “Engine oil  
change,” the text should be disregarded 
and in lieu thereof should be read as follows: 
BMW recommends that you have the oil  
changed at your BMW dealer's service cen-
ter or at another service center that has 
trained personnel that can perform the work 
in accordance with BMW specifications. 
16. At page 188, under the heading: “Service  
and Warranty Information Booklet for US 
models and Warranty and Service Guide 
Booklet for Canadian models,” the second 
paragraph should be disregarded and the 
following text read in lieu thereof:  
The manufacturer of your vehicle recom- 
mends that you have maintenance and 
repair performed by your BMW dealer's ser-
vice center or another service center or 
repair shop that employs trained personnel 
that can perform maintenance and repair 
work on your vehicle in accordance with 
BMW specifications. The manufacturer of 
your vehicle recommends that you maintain 
records of all maintenance and repair work 
performed on your vehicle. 
17. At page 191, where it reads: “Do not per- 
form work/bulb replacement on xenon 
headlights,” that text should be disregarded 
and in lieu thereof the following text should 
be read: “Xenon headlight work or replace-
ment can cause serious and fatal injuries.” 
In the text that follows, where it reads: 
“[h]ave any work on the xenon lighting 
system … ,” the following words should be 
read as preceding that passage: “It is 
strongly suggested that you …” 
18. At page 196, under the “Battery replace- 
ment” section, the text should be disre-
garded and in lieu thereof the following text 
should be read:  
Online Edition for Part no. 01 40 2 960 786 - II/15 

The brake lights will not light up if the parking
brake is set.
Turn signal, high beams,
headlight flasher
Turn signal
Hints Do not adjust the exterior mirrors
Do not adjust the exterior mirror while
driving and when turn signals/hazard warning
flashers are on, or else the additional turn sig‐
nal lights in the exterior mirror are out of posi‐
tion and can't be seen.◀
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator lamp
indicates that a turn signal bulb has failed.
Triple turn signal activation Press the lever to the resistance point.
The turn signal flashes three times.
The function can be activated or deactivated.
On the Control Display:
1."Settings"2."Lighting"3."Triple turn signal"Settings are stored for the profile currently in
use.
Signaling briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal
to flash.
High beams, headlight flasher▷High beams, arrow 1.▷Headlight flasher, arrow 2.
Washer/wiper system Switching the wipers on/off and brief
wipe
Hints Do not activate wipers if frozen to wind‐
shield
Do not switch on the wipers if they are frozen
to the windshield; otherwise, the wiper blades
and the wiper motor may be damaged.◀
Do not activate wipers on dry windshield
Do not use the wipers if the windshield is
dry, as this may damage the wiper blades or
cause them to become worn more quickly.◀
Seite 67DrivingControls67
Online Edition for Part no. 01 40 2 960 786 - II/15 

Lane departure warningSystem is switched on and under cer‐
tain circumstances warns if a detected
lane is left without flashing beforehand.
For additional information, refer to Lane depar‐
ture warning, refer to page  110.
Green lights Turn signal Turn signal on.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal bulb
has failed.
For additional information, refer to Turn signal,
refer to page  67.
Parking lights, headlight control Parking lights or headlights are acti‐
vated.
For additional information, refer to
Parking lights/low beams, headlight control, re‐
fer to page  93.
High-beam Assistant High-beam Assistant is switched on.
High beams are activated and off auto‐
matically as a function of the traffic sit‐
uation.
For additional information, refer to High-beam
Assistant, refer to page  95.
Cruise control The system is switched on. It maintains
the speed that was set using the con‐
trol elements on the steering wheel.Blue lights
High beams High beams are activated.
For additional information, refer to High
beams, refer to page  67.
General lamps Check Control At least one Check Control message is
displayed or is stored. The symbol is
shown in the display of the instrument
cluster.
M Drive M Drive 1 is activated.
M Drive 2 is activated.
Text messages
Text messages in combination with a symbol
in the instrument cluster explain a Check Con‐
trol message and the meaning of the indicator
and warning lights.
Supplementary text messages
Additional information, such as on the cause of
an error or the required action, can be called up via Check Control.
With urgent messages the added text will be
automatically displayed on the Control Display.
Symbols
Depending on the Check Control message, the
following functions can be selected.▷  "Owner's Manual"Seite 79DisplaysControls79
Online Edition for Part no. 01 40 2 960 786 - II/15 

You can obtain a selection of replacement
bulbs at the service center.
Danger of burns
Only change bulbs when they are cool;
otherwise, there is a danger of getting
burned.◀
Working on the lighting system
When working on the lighting system,
you should always reel off the lights affected to
prevent short circuits.
To avoid possible injury or equipment damage
when replacing bulbs, observe any instructions
provided by the bulb manufacturer.◀
Do not perform work/bulb replacement
on xenon headlights
Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center. Due to the high voltage
present in the system, there is a danger of fatal
injuries if work is carried out improperly.◀
Do not touch the bulbs
Do not touch the glass of new bulbs with
your bare hands, as even minute amounts of
contamination will burn into the bulb's surface
and reduce its service life.
Use a clean tissue, cloth or something similar,
or hold the bulb by its base.◀
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting
diodes installed behind a cover as a light
source.
These light-emitting diodes, which are related
to conventional lasers, are officially designated as Class 1 light-emitting diodes.
Do not remove the covers
Do not remove the covers, and never
stare into the unfiltered light for several hours;
otherwise, irritation of the retina could result.◀Headlight glass
Condensation can form on the inside of the ex‐
ternal lights in cool or humid weather. When
driving with the light switched on, the conden‐
sation evaporates after a short time. The head‐
light glass does not need to be changed.
If the headlights do not dim despite driving
with the light switched on, increasing humidity
forms, e. g. water droplets in the light, have the service center check this.
Headlight setting The headlight adjustments can be affected by
changing lights and bulbs. Have the head‐
lights' settings checked and corrected by serv‐
ice after a replacement.
Front lights, bulb replacement
Xenon headlights
Xenon headlights
Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lights on and off frequently shortens their life.
Do not perform work/bulb replacement
on xenon headlights
Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center. Due to the high voltage present in the system, there is a danger of fatal
injuries if work is carried out improperly.◀
For checking and adjusting headlamp aim,
please contact your BMW center.Seite 191Replacing componentsMobility191
Online Edition for Part no. 01 40 2 960 786 - II/15 

Headlights1Parking lights / daytime running lights2Low beams/high beams/headlight flasher3Turn signal
Low beams and high beams are designed with
xenon technology.
The parking lights and daylight running lights
are made using LED technology.
Contact your service center in the event of a
malfunction.
Turn signal
Follow general instructions, refer to page  190.
21-watt bulb, PY21W
1.In the wheel house, unscrew three screws
using the screwdriver from the onboard ve‐
hicle tool kit, arrow 1.2.Lift the wheel house panel and firmly hold
it, arrow 2.3.Turn the bulb socket counterclockwise and
remove.4.Press the bulb gently into the socket, turn
counterclockwise and remove.5.Install the new bulb and bulb holder in re‐
verse order of removal.6.Refasten the wheel house panel.
LED headlights
Light-emitting diodes (LEDs)
With LED headlights, all front lights and side
indicators are designed with LED technology.
Contact your service center in the event of a
malfunction.
Headlights
1Cornering light2Low beams/headlight flasher3High beams/headlight flasher4Parking lights / daytime running lights5Turn signal6Side marker lightsSeite 192MobilityReplacing components192
Online Edition for Part no. 01 40 2 960 786 - II/15 

Brightness of Control Dis‐play  90 
Bulb replacement  190 
Bulb replacement, front  191 
Bulb replacement, LED head‐ lights  192 
Bulb replacement, rear  193 
Bulb replacement, xenon headlights  191 
Bulbs and lights  190 
Button, Start/Stop  62 
Bypassing, refer to Jump- starting  200 
C
California Proposition 65 Warning  7 
Camera lenses, care  208 
Camera, rearview cam‐ era  125  
Camera, Side View  127 
Camera, Top View  129 
Can holder, refer to Cuphold‐ ers  149  
Car battery  196 
Carbon ceramic brake M  154 
Car care products  206 
Care, displays  208 
Care, vehicle  206 
Cargo  160 
Cargo area, enlarging  145 
Cargo area, storage compart‐ ments  149 
Cargo, securing  161 
Cargo straps, securing cargo  161 
Car key, refer to Remote con‐ trol  34 
Carpet, care  208 
Car wash  205 
Catalytic converter, refer to Hot exhaust system  157 
CBS Condition Based Serv‐ ice  188  CD/Multimedia, see user's
manual for Navigation, En‐
tertainment and Communi‐
cation 
Center armrest  148 
Center console  16 
Central locking system  39 
Central screen, refer to Con‐ trol Display  18 
Ceramic brake  154 
Changes, technical, refer to Safety  7 
Changing parts  190 
Changing wheels  195 
Changing wheels/tires  176 
Chassis, electronic  117 
Chassis number, see vehicle identification number  9 
Check Control  77 
Checking the engine oil level electronically  183 
Checking the oil level elec‐ tronically  183 
Children, seating position  58 
Children, transporting safely  58 
Child restraint fixing sys‐ tem  58 
Child restraint fixing system LATCH  60 
Child restraint fixing systems, mounting  58 
Child seat, mounting  58 
Child seats  58 
Chrome parts, care  207 
Cigarette lighter  143 
Cleaning displays  208 
Climate control  134 
Clock  81 
Closing/opening via door lock  39 
Closing/opening with remote control  37 
Clothes hooks  149 
Cockpit  14 Combination reel, refer to
Turn signals  67 
Combination switch, refer to Wiper system  67 
Comfort Access  41 
Compartments in the doors  148 
Compass  141 
Compound brake  154 
Compressor  177 
Computer, refer to On-board computer  86 
Condensation on win‐ dows  136 
Condensation under the vehi‐ cle  158  
Condition Based Service CBS  188 
Confirmation signal  44 
ConnectedDrive, see user's manual for Navigation, En‐
tertainment and Communi‐
cation 
ConnectedDrive Services 
Connecting electrical devi‐ ces  143 
Control Display  18 
Control Display, settings  89 
Controller  18, 19  
Control systems, driving sta‐ bility  114 
Convenient opening with the remote control  37 
Coolant  186 
Coolant temperature  81 
Cooling function  135 
Cooling, maximum  135 
Cooling system  186 
Cornering light  94 
Corrosion on brake discs  158 
Cosmetic mirror  143 
Courtesy lamps during un‐ locking  37 
Courtesy lamps with the vehi‐ cle locked  38 
Cruise control  120 Seite 215Everything from A to ZReference215
Online Edition for Part no. 01 40 2 960 786 - II/15 

Vehicle identification num‐ber  9 
Vehicle jack  196 
Vehicle paint  206 
Vehicle storage  208 
Vehicle wash  205 
Ventilation  137 
Ventilation, refer to Parked- car ventilation  137 
VIN, see vehicle identification number  9 
Voice activation system  27 
W Warning and indicator lamps, see Check Control  77 
Warning displays, see Check Control  77 
Warning messages, see Check Control  77 
Warning triangle  200 
Warranty  7 
Washer fluid  69 
Washer nozzles, wind‐ shield  69 
Washer system  67 
Washing, vehicle  205 
Water on roads  157 
Weights  212 
Welcome lamps during un‐ locking  37 
Welcome lights  93 
Wheel base, vehicle  212 
Wheel cleaner  207 
Wheels, changing  176 
Wheels, everything on wheels and tires  172 
Wheels, Tire Pressure Moni‐ tor TPM  101 
Width, vehicle  212 
Window defroster, rear  136 
Windows, powered  46 
Windshield washer fluid  69 
Windshield washer noz‐ zles  69 Windshield washer sys‐
tem  67 
Windshield wiper  67 
Winter storage, care  208 
Winter tires, suitable tires  177 
Winter tires, tread  175 
Wiper  67 
Wiper blades, replacing  190 
Wiper fluid  69 
Wiper, fold-out position  69 
Wiper system  67 
Wood, care  207 
Word match concept, naviga‐ tion  25 
Wrench, see Onboard vehicle tool kit  190 
X
Xenon headlights, bulb re‐ placement  191 Seite 222ReferenceEverything from A to Z222
Online Edition for Part no. 01 40 2 960 786 - II/15