2016 AUDI S7 oil

Checking and F ill in g
areas, into open streams or down sewage
drains.
- Recycle used engine o il by taking it to a used
engine oil collection facility in your area, or
contact a service station.
Cooling system
Coolant
T he engine coolant performs two functions: it
keeps the engine from overheating and it pro ­
tects the engine from freezing in the winter .
The cooling sys tem is sealed and generally re­
qu ires little attention .
T he cooling system has been filled at the facto ry
with a permanent coo lant wh ich does not need to
be changed . T he coolan t consists of a mixture of
specially condit ioned water and the manufactur ­
er's glycol-based coolant addit ive Gl3 ant ifreeze
with a nticorrosion add itives (50% fo r USA mod­
e ls · 60% for Canadian mode ls). Thi s m ix tu re both
'
assures the ne cessary fros t protection and pro -
t ects meta l components in t he engine's cooling
system from corrosion and scaling. It a lso raises
the boiling point of the coolant.
D o not reduce the concentr ation o f the coo lant in
the summer by addi ng p la in water.
The propor­
tion of coolant additive must be at least 50 %
but not more than 60 %
to maintain antifreeze
protection and cooling efficiency .
If the coolant
frost protection is too low, the coolant could
freeze and damage the ve hicle heati ng and en­
g ine cooling system .
For year-round driving, antifreeze is added at the
factory for tempera tures down to:
- -3 1 °F (- 35°C)USA
- - 4 0 °F ( - 4 0 °C) Canada.
I f you must add coo lant, use a m ixt ur e of wate r
a nd coolant add it ive. Mixing the coolant additive
w ith d istilled w ate r is recommended.
_& WARNING
Before yo u check any thing in t he engine com­
par tment, always read and hee d all WA RN -
224
INGS ~ &. in Working in the engine compart­
ment on page 218.
(D Note
- Be fore wi nter sets in, have the coo lant
checke d to see if the coolant additive in you r
vehicle is sufficient to meet the climate con­ ditions. This is espec ia lly impo rtant if you
live in a region where the winter is extreme­
ly cold . If necessary, increase the p roportion
of coolan t addit ive to 60% .
- Whe n adding coolant additive to your cool­
ing system, remember:
- We re commend usin g on ly cool ant addi­
tive Gl2++ o r Gl3 (chec k the label) fo r
your ve hicle. This coo lant additive is avai l­
ab le at aut horized Aud i dea le rs . Othe r
types of ant ifreeze can significant ly re­
d uce co rrosion protection. The resulting
corrosion can cause a loss of coolant a nd
serious e ngine damage .
- Do not add any type of rad iator leak sealant
to your vehicle's engine coolant. Adding ra ­
diator repa ir fl uid may adverse ly affec t the
func tion and perfo rmance of your cooling
system a nd could result in d amage not cov­
ere d by yo ur N ew Vehi cle Lim ited War ranty.
Checking the engine coolant level
The engine coolant level can be checked with a
quick glance.
Fi g. 1 91 Eng ine co mpar tmen t: c over on t he coo la nt expa n­
sio n tan k
Befo re you check a nyth ing in the eng ine compart­
men t,
always read and he ed all WARNINGS
~ A in Working in the engine compartmen t on
page 218. ..,.

M N <( (.J
'SI: ,...., \!) 1.1'1
N \!) ,....,
~ Park your vehicle on a level surface.
~ Switch off the ignition .
~ Read the eng ine coolant leve l from the coolant
expansion tank
c> fig. 191, c> page 220,
fig. 188.
With a cold engine, the coolant level
should be between the "min" and "max" mark­
i ngs. When the engine is warm, the level may
be s light ly above the "max" marking.
The location of the coolant expans ion tank can be
seen in the engine compartment illustrat ion
i=>page220.
To obtain an accurate reading, the engine must
be sw itched
off.
The expansion tank in you r vehicle is equipped
with an electric coolant level sensor.
When the coo lant level is too low, the warning
light in the Auto-Check System
c:> page 15 wi ll il­
l uminate unti l you a dd coolant and the level has
been restored to norma l. Even though there is an
e lectric coolant level sensor, we still recommend
you check the coolant level from time to time.
Coolant loss
Coolant loss may i ndicate a leak in the coo ling
system . In the event of coo lant loss , the cooling
system should be inspected immed iate ly by your
author ized Audi dealer. It is not enough merely
to add coolant .
In a
sealed system, losses can occur only if the
boiling point of the coo lant is exceeded as a re­
sult of overheat ing.
A WARNING
The cooling system is under pressure and can
get very hot. Reduce the risk of scalding from
hot coolant by following thes e steps.
- Turn off the engine and allow it to coo l
dow n.
- Protect yo ur face, hands and arms from es­
caping fluid and steam by cove ring the cap
with a la rge, th ick rag.
- Turn the cap slowly and ve ry carefu lly in a
counte r-clockw ise direct io n wh ile a pplying
light, downwa rd pr essur e on the top of the
c ap.
Checking and Fillin g
-To avo id being burned, do not sp ill anti­
freeze o r coolant on the exha ust system or
hot engine parts. Under certa in cond itions,
the ethylene glyco l in engi ne coo lant can
ca tch fire.
(D Note
Do not add any type o f radiator leak sea lant
to you r vehicle 's engi ne coolant . Add ing radia­
tor repair fluid may adversely affect the func­
tion and pe rformance of your coo ling system
and could r esult in damag e not cover ed by
your New Veh icle Limited Warranty.
Adding coolant
Be very careful when adding engine coolant.
Before you check a nyth ing in the eng ine compart­
me nt,
always read and heed all WARNINGS
c> .&. in Working in the engine compartment on
page 218.
~ Requirement: T here must be a residua l amount
of coolant in the expansion tank
c:> (D .
~Tu rnoff the engi ne.
~ Le t the eng ine cool down.
~ Place a thick rag ove r the coo lan t expansion
t ank
c:>page 224, fig. 191 and carefully tw ist
t he cap coun ter- clockwise
c:> .&, .
~ Ad d coo lant mixed in the correc t ra tio
c:> page 224, Coolant up to the MAX marking .
~ Make sure that the fl uid leve l remains stab le.
Add more coo lant if necessary.
~ Twist the cap o n again tightly.
Rep lacement engine coo lant must confo rm to ex­
act specifications
c> page 224, Coolant.
We recommend using only coo lant add it ive G1 2+
+ , G 13 or in an emergency G12+. Do
not use a
different additive. In an emergency use p lain wa­
ter unt il you can get the correct add itive and can
restore the correct ratio. This should be done as
soon as possib le.
If you have lost a considerab le amou nt of cool­
ant, then you shou ld add cold antifreeze and co ld
water only whe n the eng ine is co ld.
Always use
new engine coo lant w hen refilling.
225

M N <( I.J "". rl I.O
"' N I.O rl
Brake fluid
Checking brake fluid level
Fig. 192 Engine compa rtment : cove r on the brake f luid
reservoir
N
N
-N ,::
~
Before you check anything in the engine compart­
ment,
always read and heed all WARNINGS
¢ A in Working in the engine comportment on
page 218.
.,. Read the brake fluid level from the brake fluid
reservoir
¢ fig. 192, ¢page 220, fig. 188. The
brake fluid leve l must be between the "MIN"
and "MAX" markings .
The location of the brake f luid reservo ir can be
seen in the engine compartment illustration
¢page 220.
The fl uid level may drop slightly after some time
due to the automatic adjustment of the brake
pads. This is not cause for alarm.
I f the brake fluid level falls
considerably below
the "MIN" mark, the brake warning/indicator
light
1111 (U .S. models)/ . (Canadian models)
will come on ¢
page 14. Do not cont inue to oper­
ate the vehicle . The complete brake system
should be thoroughly checked by an authorized
Audi dealer or other qualified facility and the cause corrected. If the brake fluid level is too low,
the brake warning/indicator light will illuminate.
Contact an authorized Audi dealer
immediately .
Changing brake fluid
Hove the broke fluid changed by on experienced
technician .
Brake fluid absorbs moisture from the air. If the
water content in the brake fluid is too high, cor-
Checking and Filling
rosion in the brake system may result after a peri­
od of time. The boiling point of the brake fluid
will also decrease considerably and decrease braking performance .
T herefore, the brake fluid must be changed
every
two years.
Always use new brake fluid which con­
forms to Federal Motor Vehicle Standard "FMVSS
116 DOT 4".
The brake fluid reservoir can be difficult to reach,
therefore, we recommend that you have the brake flu id changed by your authorized
Audi
dealer .
Your dea ler has the correct tools, the
right brake fluid and the know-how to do this for
you .
_&. WARNING
-.
- Brake fluid is poisonous . It must be stored
only in the closed original conta iner out of
the reach of children!
- Brake failure can resu lt from o ld or inappro­
p riate brake fluid. Observe these precau­
tions:
- Use only brake fluid that meets SAE speci­
fication
J 1703 and conforms to Federa l
Motor Vehicle Standard 116. Always check
with your authorized Audi dealer to make
sure you are using the correct brake fluid .
The correct type of brake flu id is also ind i­
cated on the brake fluid reservoir.
- The brake fluid must be new. Heavy use of
the brakes can cause a vapor lock if the
brake fluid is left in the system too long.
T his can seriously affect the efficiency of
the brakes as well as your safety. This
could result in an accident.
(D Note
Brake fluid will damage the paint of your vehi­
cle.
@ For the sake of the environment
Because of the problem of prope r disposal of
brake fluid as well as the special tools re­
quired and the necessary expertise, we rec­
ommend that you have the brake flu id
changed by your authorized Audi dealer.
227

Wheels
Wheels and Tires
General information
.,.Che ck your tires regularly for
damage (punctures, cuts, cracks
and bulges). Remove foreign ob­
jects from the tire tread.
.,. If driving over curbs or similar
obstacles, drive slowly and ap­
proach the curb at an angle.
.,.Have faulty tires or rims re­
placed immediately.
"'Protec t your tires from oil,
grease and fuel.
.,.Ma rk tires before removing
them so that the same running direction can be maintained if
they are reinstalled .
.,.Lay tires flat when storing and
store them in a cool, dry location
with as little exposure to light as
possible.
(D Note
-Please note that summer and
winter tires are designed for
the conditions that are typical
in those seasons. Audi recom­
mends using winter tires dur­
ing the winter months. Low
temperatures significantly de­ crease the elasticity of summ­
er tires, which affects traction
Wheels
and braking ability. If summer
tires are used in very cold tem­
peratures, cracks can form on
the tread bars, resulting in
permanent tire damage that
can cause loud driving noise
and unbalanced tires.
-Burnished, polished or
chromed rims must not be
used in winter driving condi­
tions. The surface of the rims
does not have sufficient corro­
sion protection for this and
could be permanently dam­
aged by road salt or similar
substances.
Tire designations
Fig. 195 T ir e designations on the sid e-
wall ,..
233

Wheels
Your safety and that of your pas­
sengers also depends on making
sure that load limits are not ex­
ceeded. Vehicle load includes ev­
erybody and everything in and on
the vehicle. These load limits are
technically referred to as the vehi­
cle's
Gross Vehicle Weight Rating
("GVWR").
The "GVWR" includes the weight of the basic vehicle, all factory in­
stalled accessories, a full tank of
fuel, oil, coolant and other fluids
plus maximum load . The maxi­
mum load includes the number of
passengers that the vehicle is in­
tended to carry ("seating capaci­
ty") with an assumed weight of 150 lbs. (68 kg) for each passen­
ger at a designated seating posi­
tion and the total weight of any
luggage in the vehicle. If you tow
a trai ler, the weight of the trailer
hitch and the tongue weight of
the loaded trailer must be includ­
ed as part of the vehicle load.
The
Gross Axle Weight Rating
("GAWR") is the maximum load
that can be applied at each of the
vehicle's two axles.
The fact that there is an upper
limit to your vehicle's Gross Vehi -
246
cle Weight Rating means that the
total weight of whatever is being
carried in the vehicle (including
the weight of a trailer hitch and
the tongue weight of the loaded
trailer) is limited. The more pas­
sengers in the vehicle or passen­
gers who are heavier than the
standard weights assumed mean
that less weight can be carried as
luggage.
The Gross Vehicle Weight Rating
and the Gross Axle Weight Rating
are listed on the safety compli­
ance sticker label located on the
driver's side B-pillar
c::> page 243,
fig. 197.
&_ WARNING ~
Overloading a vehicle can cause
loss of vehicle control, a crash
or other accident, serious per­
sonal injury, and even death.
-Carrying more weight than your vehicle was designed to carry will prevent the vehicle
from handling properly and in­
crease the risk of the loss of
vehicle control.
-The brakes on a vehicle that
has been overloaded may not
be able to stop the vehicle
within a safe distance.

Fuses
Fuse panel® (red)
10 Rear seat entertainment
12
Rear spoiler (Sportback), tilt/open sunroof,
Panorama g lass roof
Fuse panel © (brown)
No. Equipment
1 Infotainment
2 I n fota inment
3
Infotainment , automatic d imm ing interior
rea rview mirro r
s TV tuner
6 Tank leak detection system
7 Sockets
8 Park ing heate r
10 Lu mba r su pport (front passenger's seat)
12 Infota inment
Fuse panel @ (black )
No. Equipm ent
Air suspens io n, adapt ive dampers, sport
l differentia l, e lectr om echanical parking
brake
2
Clu tch pedal position senso r/au tomatic
transmission
3 Seats
4 Rear w iper (Avant)
s Side assist
6 Engine sound
7 Infota inment/sound amplifier
8 Gateway
9 Sport differentia l
10 Climate control system
11
T ire press ure moni to ring sys tem/p ark ing
heater
12 Start-Stop-System
Fuse panel © (black )
No. Equipment
1 Special p urpose vehicles/rear seats
Fuse panel ® (black)
No. Equipment
1 Rear w indow defogge r
264

M N <( I.J "". rl I.O
"' N I.O rl
Raising the vehicle
lifting with workshop hoist and with floor
jack
The vehicle may only be lift ed at the lifting
poin ts illustra ted.
F ig. 222 Front lift in g po int
F ig. 223 Rear lift in g point
.,. Read and heed WARNING ¢ .&_.
.,. Activate the vehicle jack mode* in the M MI:
I CAR I funct ion button> (Car )* systems control
button >
Servicing & checks > Air susp.: jack
mode > On .
.. Locate lifting points¢ fig. 222 and¢ fig. 223 .
.. Adju st lift ing a rm s of wor ksh op hoist or floor
jack t o match ve hicle lifting poi nts.
.. Inse rt a r ubber pa d between the floor jac k/
workshop hoist and the lifting poi nts.
T he vehicle jac k mode* mus t be activa ted so that
the au tomatic a djust ment of the Adaptive Air
Suspension * does not make it more diffi cult to
ra ise the veh icle with the floor jack.
If you must lift your vehicle with a floor jack to
work underneath , be sure the vehicle is safely
supported on stands intended for this purpose.
Emergency situations
Front lifting point
T he li ftin g po in t is loca ted o n the floo r pan rein­
f o rcement about at the same level as the ja ck
mounting point¢
fig. 222 . Do not lift the vehi­
cle at the vertical sill reinforcement.
Rear lifting point
T he lifti ng po int is loc ated o n the vert ica l rei n­
f o rcement o f the lower s ill for the on- bo ar d ja ck
¢ fig. 223.
lifting with vehicle jack
Refer to¢ page 257 .
A WARNING
- To reduce t he ris k o f ser ious injury and vehi­
cle damag e.
- Always lift the vehicle only at the specia l
workshop h oist a nd f loor jack lift poi nts il­
lu strat ed¢
fig. 222 and ¢ fig. 223.
- Fail ure to lift the ve hicle at these points
could cause the veh icle to tilt o r fall from
a lift if there is a cha nge in veh icle weight
dis tributi on and balance . T his might hap ­
p en, fo r example, wh en h eavy compone nts
s uch as th e engine blo ck or trans missi on
are re m ove d.
- Wh en removing heavy comp onents li ke
t he se, an ch or veh icle to h ois t o r ad d corre­
spon ding we ights to m aintai n the c enter of
g ravity . Otherwise, the vehicle might tilt or
slip off the hoist , causing ser ious persona l
i nju ry .
(D Note
- B e aw are o f the following poi nts befo re li ft­
ing the vehicle:
- The vehicle should never be lifted or
jacked up from underneath the engine oil
pan, the transmission housing, the front
or rear axle or the body side members.
Thi s could lead to serious damage .
- To avoid damage to the underbody or
chassis frame, a rubber pad must be in ­
serted between the floor ja ck and the lift
point s. .,,.
269

Technical data
Vehicle identification
F ig. 22 4 Vehicl e Ide ntificat io n Number (VlN) plate: loca ·
t io n on drive r's s id e das h pane l
XXXXX XX -X -XXXX XXX XX
CD+ ~t :1:: xxxxxxxx xx x xxxxxxxx
T VP /fffl XXX XXX
XX XXXXXXX XX X X XX
XXX
KW XXX
®i ~:J ·f lfils~~ XXXX XXX XXX
®-+ ~N:a=i~ l xxxx ; xxxx xxx ; xx
II.· AUSS, I OPTIONS
E0 A
7D5 4UB 6XM 5SG 5RW
2EH J0Z lLB l
A S lB A
3FC SMU 7Xl
F0A 9G3 0G7
0YH 0JF
T L6 3KA 8EH Ul A X98 QZ7
l X W 803 908 824 020
7T6 CV7 7K0 4X3 2K2
3L4 4KC 3Y0 413
502
lSA 7GB 01A 4G0
XX. X XX X XX X xxxx
Fig. 225 T he veh icle iden ti fica tion label -inside the lug ·
g age compart ment
Vehicle Identification Number (VlN )
The Veh icle Iden tifica tion Number is located in
d iffe rent p laces:
- u nder the w indshield on the dr iver's side
¢ fig . 224.
-in the MMI: Select: Funct ion button ICAR I >
(Car )* syste ms> Servi cing & checks > VIN
~ numb er.
i3 -on the vehicle identification label.
"". rl I.O
"' N I.O rl
Technical d ata
Vehicle identification label
The vehicle identification label is lo cate d in the
lu ggage compartment in the spare whee l we ll.
T he labe l¢
fig. 225 shows the fo llowing vehicle
da ta:
(D Vehicle Ident ificat ion Number (VIN)
@ Vehicle type , engine o utp ut, transmission
® Engine and transm iss ion code
@ Paint number and interior
® Optional equipment numbers
T he information of the veh icle identification label
c a n a lso be fo und in your W arranty
& Mai nte·
nance booklet.
Safety compliance sticker
The safety compliance sticker is you r assurance
that your new vehi cle complies w ith all applicable
Fede ra l Mo tor Vehi cle Safety Sta ndards which
were in effec t at the time the vehicle was m anu­
fac tured. Yo u can find this sticker on the door
jamb on the driver 's side. It shows the month and
year of production and the vehicle identification number of your vehicle (perforation) as we ll as
the Gross Veh icle Weight Rating (GVWR) and the
Gross Axle Weight Rating (GAWR).
H igh vo ltage warn ing lab el
T he high voltage wa rning label is located in the
engine compartment next to the eng ine hood re ­
lease. The spark ign it ion system complies with
t h e Canadian standard ICES-002 .
Weights
Gross Vehicle Weight Rating
The Gross Vehicle Weight Rat ing (GVWR), and
the Gross Axle Weight Rating (GAWR) for front
and rear are listed on a st icker on the door jamb
on the dr iver 's side.
The Gross Vehicle Weight Rat ing includes the
weight of the basic vehicle plus f ull fuel tank, oil
and coolant, pl us maxim um load, which includes
passenger weigh t (150 lbs/68 kg per design ated
seat ing pos ition) and luggage weight ¢.&, . ..,,.
271