2016 AUDI Q3 change time

,..,
N
c:i ::J CX) ,..,
I.Cl U"I
N I.Cl ......
equipment. For more informat ion, refer to your
MMI Operating Manual.
(D Tips
- When you switch off the ignition or open
the driver's door, the time, date*, odomete r
and temperature are displayed for an addi ­
tional 30 seconds.
- You can access the display with the
ISETI
button when the ign ition is switched off.
Odometer
F ig. 10 In strument clu ste r: odomete r
Odometer/trip odometer
~
"' M 0 > a, m
The distance driven is shown in miles "mi" or kilo­
meters "km". The units of measurement (ki lome­
ters/m iles) can be changed in the Infotainment
system. For more informat ion, refer to your MMI
Operating Manual.
@-The odometer shows the total distance that
the vehicle has been driven.
® -The trip odometer shows the distance that
the vehicle has been dr iven since the last time
the trip odometer was reset.
It can be used to
measure short distances. The last digit indicates
1/10 miles o r 100 meter increments .
The trip odometer can be reset to zero by press­
ing the
!O .O ! reset button --~ page 10, fig. 3.
Malfunction indicator
If there is a malfunction in the instrument clus­
ter,
DEF will appear in the trip odometer display .
H ave the malfunction corrected as soon as possi­
b le .
Driver in forma tion system
Door, hood or luggage
compartment lid is open
Fig. 11 Ins trume nt cluster: d isplay when front passenger's
door is open
When the ignition is switched on, the display ap ­
pears if at least
one door or the hood/ luggage
compartment lid was not closed correctly. The in­
strument cluster display will show
which doors or
lids were not closed correctly.
Efficiency program
Overv iew
Applies to vehicles: with eff iciency program
Fig. 12 Instrumen t cluster: efficie ncy program
Operating with the windshield wiper lever*
.,. Press the I RESE T I button @ ~ page 21, fig. 5
repeatedly until the efficiency program appears
in the display.
Operating with the multifunction steering
wheel*
.,. Open car functions and select the Efficiency
program menu item ~ page 21.
T he efficiency program can help you to use less
fuel. It evaluates driving information in reference
to fuel consumption and shows other equipment
~
23

Service interval display
The service interval display detects when your ve­
hicle is due for service.
F ig. 15 I n st ru m ent cluster: example of a service interva l
d is p lay
i;i M 0
> CX) a,
The service interva l display works in two stages:
- Inspection o r oil change reminder : after ace r­
ta in distance is driven, a message a ppears in
t h e instr ument cluster d isp lay eve ry time the
ignition is sw itched on
q fig. 15 . The remain ing
distance or time is displayed briefly.
-Inspection or oil change due : if your vehicle
has reached an inspection or o il change interval
or both intervals at the same time, the mes­
sage
Inspection due! or Oil change due! or Oil
change and in spection due!
appears brie fly af­
te r swi tching the igni tion on.
Check ing service intervals
You can check the rema ining distance or time un­
til the next oil change or next inspection in the
Car menu. To do this, select: the
I CA RI fu nction
button
> (Car) systems * contro l bu tton > Servic­
ing
& checks > Service intervals .
Resetting the indicator
Your author ized Audi dealer or author ized Audi
Service Faci lity will reset the service interval dis­
p lay after pe rforming service.
If yo u have changed the oil you rsel f, you must re ­
set the oil change interva l.
To reset the display, se lect:
I CARI fu nct ion but ton
> (Car) systems * control button > Servicing &
checks > Service intervals > turn the cont ro l knob
down to
Reset o il change interval and press the
control knob.
Driver information system
(D Note
- Only reset the oi l ch ange ind icator if the oi l
was changed.
- Following the se rvice interva ls is cr it ica l to
ma intaining the se rvice life and value of
yo ur vehicle, especially the eng ine. Even if
the mileage on t he ve hicle is low, do not e x­
ceed the time fo r the next service.
- Calculat ing the time to the next oil change
is inte rru pted when the vehicle battery is
disconnected . If the vehicle is not d riven for
a lo ng pe riod of time, check t he main te­
nance schedule so tha t you can fo llow the
maint enance in terva ls.
On Board Diagnostic
System (OBD)
Malfunction Indicator Lamp (MIL)
The M alfunction Indicator Lamp ( MIL) ¢'4 in the
i nst ru m en t cl uste r is p art o f the On-Boa rd Di ag­
n os tic ( OBD I I) system .
T he wa rn ing/i nd icator lig ht ill uminates w hen the
ignition is sw itch ed on and goes out after th e en­
gine sta rts and the id le h as stab ilized. This indi­
ca tes tha t the M IL is wor kin g p roperly.
If the light does not go out after the eng ine is
sta rted, or illum inates while you are d riving, a
malfu nction may ex ist in the e ngine sys tem. If
t h e lig ht illumin ates, the c ata ly tic converte r
cou ld be d amaged.
Cont inue d riv in g
with reduced power (avoid ing
s u st ain ed high speeds and/o r rap id accelera­
ti ons ) and have the co nditi on corre cte d. Cont act
yo ur aut ho rize d Aud i dea le r.
If th e li ght il lum inates, the ele ct ronic speed lim­
i te r may also be ma lf u nct io ni ng. Fo r more inf or­
m at ion
q page 26, Ele ct ronic speed limi ter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
q page 175.
25

.... N
c:i ::J CX)
.... I.Cl U"I
N I.Cl ......
LED and batteries in the remote control key
Fig. 18 Re mote contro l key : LE D
Fig. 19 Remote con trol key : open ing the cover
LED in the remote control key
"' -N
-..!J
~
0 N N
-..!J
~
The LED ~ fig. 18 informs you of the remote con­
trol key function .
.,. If you press a button briefly, the LED blinks
once .
.,. If you press and hold a button, the LED blinks
several times .
.,. If the LED does not blink , the remote control
key battery is dead. The message
1:1 Please
change key battery
can also appear in the in­
strument cluster display. Replace the battery.
Replacing the remote control key battery
.,. Pry the cover ® off of the key@ using a coin
~fig . 19.
.,. Remove the cover in the direction of the arrow.
.,. Inse rt the new battery with the
"+ " facing up .
.,. Press the cover back onto the key until it cl icks
into place .
We recommend having the battery replaced by
your author ized Audi dealer or authorized Audi
Service Facility.
Open ing and closing
@) For the sake of the environment
Dead batteries must be disposed of using
methods that will not harm the environment .
Do not d ispose of them in household trash.
@ Tips
The replacement battery must meet the same
specifications as the origina l battery.
Remote control key synchronization
If the vehicle cannot be unlocked/locked by the
remote control, you can synchronize the remote
control key .
.,. Press the remote control key button
Im .
.,. Insert the key in the driver's door lock within 30
seconds .
.,. Press the [@] button or~ button .
Locking and unlocking the vehicle with the
remote control
Fig. 20 Remote maste r key: function bu ttons
.,. Press button @ffi to unlock the vehicle
r=;,fig . 20 .
.,. Press button @ 0 to lock the vehicle r::;, _&. in
General description on page
27 .
.,. Press button ©~ briefly to unlock the rear
lid .
.,. Press button ©~ for at least one second to
open the rear lid .
.,. Press button @
~ I P-A-N-IC~I to trigger the alarm .
The vehicle horn and emergency flashers turn on .
.,. Press button @!PANICI again to turn off the
alarm .
29

Lights and Vision
Exterior Lighting
Switching lights on and off
Fig. 35 Instrument panel: l ig ht switc h
Light switch ·'!;5-·
Turn the switch to the corresponding position.
When the lights are switched on, the ;oo: symbol
turns on.
0 -lights off. On some market-specific vers ions,
the daytime running lights* will switch on when
the ignition is switched on in this position .
-USA model s: the daytime running lights switch
on automatically when the ignition is switched
on and the light switch
c::> fig. 35 is in the O po­
s it ion or the
AUTO position (only in daylight).
The
Daytime running lights can be switched on
and off in the radio or the MMI*
c::> page 41,
i:::> A .
-Canada models : the daytime runn ing lights
switch on automatically when the ignition is
switched on and the light switch
c::> fig. 35 is in
t h e
O positio n, :oo: or the AUTO position (only in
daylight)
i:::> A .
AUTO*· Automatic headlights switch on and off
depend ing on br igh tness, fo r example in tw ilight,
du ring rain or in tunne ls .
c::> A .
coo: - Parking light
~D · Low beam headlights
~· All weat her ligh ts. T urn the swi tc h to parking
.... light :oo: or low beam head light ~D. Pull the
N
g switch up to the first notch (D.
CX)
.... I.Cl U"I
N I.Cl ....
Lights and V ision
@ii -Rear fog ligh ts. T urn the swi tch to parking
light ;oo : or low beam headlight
tD . Pull the
switch up to the second notch@.
All -weather lights
T he front lights a re adjusted au toma tica lly so
t h at there is less g lare fo r the d river from his o r
her ow n lights, for example whe n roads are we t.
Automatic dynamic headlight range control
system
Yo ur vehicle is equ ipped wi th a headligh t range
contro l system so that the head lig hts do not
blind oncoming traff ic if the vehicle load
changes . The head light range also ad justs auto ­
matically when brak ing and accelerating .
Static corne ring light*
T he stat ic co rnering light depe nds on equipmen t
and on ly works when the light switch is in the AU­
T O posit ion . The corner ing light sw itches on a u­
tomat ically at speeds up to approximately
44 mp h (70 km) when the steering wheel is at a
ce rtain ang le . The area to the side of the vehicle
is illum inated better when tur ning .
.,&. WARNING ,~ -- Automatic headlights* are o nly inten ded to
assist the driv er. They do no t reli eve t he
dr iver of resp onsib ility to check the hea d­
light s and to tur n them on m anual ly a ccord­
i n g to the curren t light an d visib ility condi ­
tion s. Fog, for examp le, cannot be detected
by the light se nsors *. So always switch o n
the low beam under these weather condi ­
tions and when driving in the dark ~D.
- The rear fog lights sho uld only be turned on
in acco rdance w ith traffic regulations, to
prevent glare for traffic behind your vehicle.
- Please observe lega l reg ulat ions w hen us ing
the lighting systems desc ribe d.
(D Note
The rea r fog lights shou ld on ly be t urne d on in
accordance with traffic reg ulations, to pre­
vent glare for traffic behind your vehicle .
39

Lights and Vision
Emergency flashers
Fig. 38 Cente r console: eme rge ncy flasher sw itc h
The emergency flashers makes other motorists
aware that you or your vehicle are in an emergen ­
cy s ituation .
.. Press the switch
l1J c> fig. 38 to turn the emer-
gency flashers on or off.
When the em ergency f lashers are on , a ll four
turn signals blink at the same time. The turn sig­
na l indicator lights
BIB in the instrument clus­
ter, as well as the light in the emerge ncy flasher
sw itch ~ blink likewise .
You can indicate a lane change or a turn when the emergency flashers are sw itched on by using the
turn sig nal lever . The emergency flashers stop
temporar ily.
The emergency flashers also wo rk when the igni­
tion is turned off.
The emergency flashers wi ll tur n on a utomat ica l­
ly if you are in an accident where th e airbag has
dep loyed.
@ Tips
You s hou ld t urn on the emergency flashers
when :
-you are the last veh icle standing in a traffic
j am so that any other ve hicles coming can
see you, o r when
- your ve hicle has broke n down or you are in
an emergency situation, o r when
-your ve hicle is being towe d by a tow truck or
if you are towing another vehicle behind
you.
42
Interior lighting
Front/rear interior lighting
Fi g. 39 Front head liner: interio r li ghtin g con trols
Fi g. 40 Rea r h eadl iner: LED re ad in g li ghts•
Press t he applicable button :
~ -Inter io r l ight ing on/off
[!] . Door cont act swi tch on/off . T he inter io r li ght­
i ng is controlled automa tic a lly .
~- Reading lights* on/off
Interior lighting
There are ot her inter ior light ing f unct ions that
are avai lable. Some funct ions can be adjusted in
the MMI. Select:
l cAR ! function button > Car sys ­
tems *
contro l butto n > Vehicle settings > Interi­
or lighting .

.... N
c:i ::J CX)
.... I.Cl U"I
N I.Cl ......
Roof rack
Description and mounting locations
Additional cargo can be carried with a roof lug­
gage rack.
Fig. 6 6 Roof rack attach ment points
.. Always read and follow the inst ruct ions prov id ­
ed by the roof rack man ufacturer when instal­
l ing the roof rack system .
If luggage or cargo is to be carried on the roof,
you must observe the following:
- Only use roof rac ks approved fo r you r vehicle.
T hese app roved roof racks a re the bas is for a
complete roof ra ck system . Additional attach­
ments or carrier systems are needed to trans ­
port luggage and sports equipment . We recom ­
mend using roof racks from the Audi orig inal
accessor ies program .
- When installing the roof rack, make sure it is
only mounted on the designated locations on
the roof¢
fig. 66.
- We recommend that you keep the installat ion
instruct ions for your roof rack system together
with your Owner's literature in the veh icle.
When should th e roof rack b e re mov ed?
- Before going through an au tomatic car wash (it
is best to ask the car wash operator for advice).
- When not in use, to reduce fue l consumption,
wind noise and to guard against theft .
_& WARNING
-Use of an unapproved roof rack or i ncorrect
mounting of an approved roof rack can
cause the roof rack o r the items attached to
it to fall off the roof onto the road .
Seats and storage
-Objects falling from the roof of a vehicle can
cause a crash and personal injury.
- On ly mount the roof rack on the designated
locations on the roof¢
fig. 66.
- The roof rack system must be insta lled ex­
actly accord ing to the instr uctions provided .
- W hen driving with a roof rac k system,
changes to the center of grav ity and w ind
resistance can change the vehicle handling
and lead to a co llision. Always adapt your
driving and your speed to the current cond i­
tions.
(D Note
- Your vehicle warranty does not cover any
damages to the vehicle caused by using roof
racks or mount ing structu res not approved
by Audi for yo ur vehicle . The same app lies to
damage resulting from incorrect roof rack
installat ion.
- Always check the roof rack mountings and
hardwa re before each trip and during a t rip
to ma ke sure eve rything is se cu rely t ight­
ened. If ne cess ary, retighte n the mountings
and check the entire sys tem from time to
t ime.
- After moun ting a roof ra ck system, or when
yo u transport objects on the roof o f you r ve­
hicle, the he ight of the vehicle is natura lly
increased. Be caref ul when driving under
low bridges or in pa rking garages for exam­
ple. This cou ld cause damage to the load
and eve n the vehicle itse lf.
- Make sure that the open rear lid and the sunroof do not come into contact with ob­
jects on the roof.
Loading the roof rack
Always distribute loads evenly. Make sure any­
thing on the roof rack is securely tied down.
.. Always distr ibute the loads on the roof rack
eve nly .
.. Always attach items to the roof rack secu rely
before you drive off .
The maxim um permissible roof weig ht is
165 lb
(75 kg) . The roof weight is the total of the Ill>
57

Driving
the<®> switch is released, or the accelerator pedal is depressed, emergency braking stops.
A WARNING
Emergency braking should only be used in an
emergency, when the normal brake pedal has
failed or the brake pedal is obstructed. During
emergency braking, your vehicle will brake
similar to heavy braking . ESC and the associ·
ated components (ABS, ASR, EDL) cannot
overcome the laws of physics. In corners and
when road or weather conditions are bad, a
full brake application can cause the vehicle to
skid or the rear end to break away, which in­
creases the risk of an accident.
Speed warning system
Introduction
Applies to vehicles: with speed warning system
The speed warning sy stem helps you to stay un­
der a specified maximum speed.
The speed warning system warns you if you are
exceeding the maximum speed that you have set .
You will hear a warning tone when your speed ex­
ceeds the stored value by approximately 3 mph
(3 km/h) . The indicator light
101 (USA models)/
llll (Canada models) and the Speed limit warn­
ing exceeded.
message appear in the instrument
cluster display at the same time . T hP
(Cl / t•j in­
dicator light turns off when the speed decreases
below the stored maximum speed.
Setting a threshold is recommended if you would
like to be reminded when you reach a certain
maximum speed. Situations where you may want
to do so include driving in a country with a gener­
al speed limit or if there is a specified maximum
speed fo r winter tires.
@ Tips
Regardless of the speed warning system, you
should always monitor your speed using the
speedometer and make sure you are following
the legal speed limit.
74
Setting the threshold
Applies to vehicles: with speed warn ing system
You can set, change and delete the warning
threshold in the Infotainment system .
.. Select: !CAR ! function button> (Car) systems*
control but ton > Driver assist> Speed warning .
You can set any threshold between 20 mph
(30 km/h) and 150 mph (240 km/h). Settings
can each be adjusted in increments of S mph (10 km/h) .
Cruise control system
Switching on
Applies to vehicles: with cruise control system
The cruise control system makes it possible to
drive at a constant speed starting at 20 mph
(30kmlh).
0
f
~
0
Fig. 82 Lever: cruise con trol system
.. To switch the cruise control on, pull the lever
into position
© c:> fig . 82 .
"'Drive at the speed to be maintained .
"' To store the speed, press the button @. The in­
dicator light
[ij;(tj~i~ (USA models) / Bl (Canada
models) turns on in the instrument cluster .
&_ WARNING
-Always pay attention to the traffic around
you when the cruise control is in operation. You are always responsible for your speed
and the distance between your vehicle and
other vehicles .
.

.... N
c:i :::J CX)
.... I.Cl U"I
N I.Cl ......
General information
Appl ies to vehicles: with Audi side assist
®
®
©
Fig. 85 Driving si tuat ions
Fig. 86 Rear of the veh icle: pos ition of the sensors
Side assist functions at speeds above approxi­
mately
19 mph (30 km/h).
@ Vehicles that are approaching
:'ll 0
0
::':,
"' m
In certain cases, a vehicle will be classified as
critical for a lane change even if it is still some­
what far away. The faster a vehicle approaches,
the sooner the display in the exterior mirror will
turn on.
@ Vehicles traveling with you
Vehicles traveling with you are indicated in the
exterior mirror if they are classified as critical for
a lane change. All vehicles detected by side assist
Audi side assist
are indicated by the time they enter your "blind
spot", at the latest.
© Vehicles left behind
If you slowly pass a vehicle that side assist has
detected (the difference in speed between the
vehicle and your vehicle is less than 9 mph (15
km/h)), the display in the exterior mirror turns
on as soon as the vehicle enters your blind spot.
The display will not turn on if you quickly pass a
vehicle that side assist has detected (the differ­
ence in speed is greater than 9 mph (15 km/h)).
Functional limitations
The radar sensors are designed to detect the left
and right adjacent lanes when the road lanes are
the normal width. In some situations, the display
in the exterior mirror may turn on even though
there is no vehicle located in the area that is criti­
cal for a lane change. For example:
- If the lanes are narrow or if your are driving on
the edge of your lane. If this is the case, the
system may have detected the vehicle in anoth­
er lane that is
not adjacent to your current lane.
- If you are driving through a curve. Side assist
may react to a vehicle that is one lane over
from the adjacent lane.
- If side assist reacts to other objects (such as
high or displaced guard rails).
- In poor weather conditions. The side assist
functions are limited.
Do not cover the radar sensors
~ fig. 86 with
stickers, deposits, bicycle wheels or other ob­
jects, because this will affect the function. Do not
use side assist when towing a trailer. For infor­
mation on cleaning, refer to ¢
page 168.
A WARNING
=
-Always pay attention to traffic and to the
area around your vehicle . Side assist cannot
replace a driver's attention. The driver alone is always responsible for lane changes and
similar driving maneuvers .
- Improper reliance on the side assist system can cause collisions and serious personal in-
-
Jury: ~
77