2016 AUDI Q3 light

Service interval display
The service interval display detects when your ve­
hicle is due for service.
F ig. 15 I n st ru m ent cluster: example of a service interva l
d is p lay
i;i M 0
> CX) a,
The service interva l display works in two stages:
- Inspection o r oil change reminder : after ace r­
ta in distance is driven, a message a ppears in
t h e instr ument cluster d isp lay eve ry time the
ignition is sw itched on
q fig. 15 . The remain ing
distance or time is displayed briefly.
-Inspection or oil change due : if your vehicle
has reached an inspection or o il change interval
or both intervals at the same time, the mes­
sage
Inspection due! or Oil change due! or Oil
change and in spection due!
appears brie fly af­
te r swi tching the igni tion on.
Check ing service intervals
You can check the rema ining distance or time un­
til the next oil change or next inspection in the
Car menu. To do this, select: the
I CA RI fu nction
button
> (Car) systems * contro l bu tton > Servic­
ing
& checks > Service intervals .
Resetting the indicator
Your author ized Audi dealer or author ized Audi
Service Faci lity will reset the service interval dis­
p lay after pe rforming service.
If yo u have changed the oil you rsel f, you must re ­
set the oil change interva l.
To reset the display, se lect:
I CARI fu nct ion but ton
> (Car) systems * control button > Servicing &
checks > Service intervals > turn the cont ro l knob
down to
Reset o il change interval and press the
control knob.
Driver information system
(D Note
- Only reset the oi l ch ange ind icator if the oi l
was changed.
- Following the se rvice interva ls is cr it ica l to
ma intaining the se rvice life and value of
yo ur vehicle, especially the eng ine. Even if
the mileage on t he ve hicle is low, do not e x­
ceed the time fo r the next service.
- Calculat ing the time to the next oil change
is inte rru pted when the vehicle battery is
disconnected . If the vehicle is not d riven for
a lo ng pe riod of time, check t he main te­
nance schedule so tha t you can fo llow the
maint enance in terva ls.
On Board Diagnostic
System (OBD)
Malfunction Indicator Lamp (MIL)
The M alfunction Indicator Lamp ( MIL) ¢'4 in the
i nst ru m en t cl uste r is p art o f the On-Boa rd Di ag­
n os tic ( OBD I I) system .
T he wa rn ing/i nd icator lig ht ill uminates w hen the
ignition is sw itch ed on and goes out after th e en­
gine sta rts and the id le h as stab ilized. This indi­
ca tes tha t the M IL is wor kin g p roperly.
If the light does not go out after the eng ine is
sta rted, or illum inates while you are d riving, a
malfu nction may ex ist in the e ngine sys tem. If
t h e lig ht illumin ates, the c ata ly tic converte r
cou ld be d amaged.
Cont inue d riv in g
with reduced power (avoid ing
s u st ain ed high speeds and/o r rap id accelera­
ti ons ) and have the co nditi on corre cte d. Cont act
yo ur aut ho rize d Aud i dea le r.
If th e li ght il lum inates, the ele ct ronic speed lim­
i te r may also be ma lf u nct io ni ng. Fo r more inf or­
m at ion
q page 26, Ele ct ronic speed limi ter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
q page 175.
25

Driver information system
On-Board Diagnostics
F ig. 16 Locat ion of Data Link Connector (DLC)
On-Board Diagnostics monitors the components
of your emission control system. Eac h monitored
component in your engine system has been as­
signed a code. In case of a ma lfunction, the com­
ponent w ill be identified and the fault stored as a
code in the control module memory.
The MIL light may also illuminate if there is a
leak in the on-board fuel vapor recovery system.
I f the light ill uminates after a refueling, stop the
veh icle and make sure the fuel filler cap is prop­
erly closed (on ly vehicles with gasol ine engine)
r::!> page 17 5.
I n order to make an accurate diagnosis, the stor­
ed data can only be displayed using special diag­
nostic equipment (generic scan tool for OBD).
I n order to connect the specia l diagnostic equip­
ment, push the plug into the Data Link Connector
(D LC). The DLC is located to the right of the hood
release
¢ fig. 16.
Your author ized Audi dealer or qualified work­
shop can interpre t the code and perform the nec­
essary repair .
.&_ WARNING
-
Do not use the diagnostic connector for pe r­
sonal use. Incorrect usage can cause malfunc­
tions, which can increase the risk of a colli­
sion!
Electronic speed Limiter
Your vehicle may be factory equipped with tires
that are rated for a maximum speed of 130 mph (210 km/h). This is less than the maximum speed
26
of your veh icle. To reduce the risk of sudden tire
failure and loss of contro l if the vehicle is operat­
ed at excessive speeds, your vehicle also has an
electronic speed limiter . The electronic speed
limiter prevents your vehicle from going faster
than the tire speed rating . For more information
r::!> page 191.
If the engine control un it receives faulty vehicle
road speed signals, the Malfunct ion Indicator
Lamp (MIL)
(,ij will illuminate. If this occurs,
contact the nearest author ized Audi dealer for
assistance.
.&_ WARNING
A lways observe the posted speed limits and
adjust your speed to suit prevailing road, traf­
f ic and weather conditions. Never drive your
vehicle faster than the maximum speed rating
of the t i res installed .
-

..... N
c:i ::J CX)
..... I.Cl U"I
N I.Cl ......
off unnecessary convenience functions. It is
possible that you will not be able to unlock
your vehicle using these convenience func­ tions .
- For Declaration of Compliance to United
States FCC and Industry Canada regulations
¢ page 235.
Locking and unlocking the vehicle from
inside
Fig. 22 Driver's door : power locking switc h
Fig. 23 Rear ce nter console: power locking switc h
• Press the button@ to lock the vehicle¢.&_.
• Press the button
Cd to unlock the vehicle .
You can
lock and unlock the vehicle using the
switches in the driver's or passenger· s door
¢
fig. 22. You can only lock the vehicle using the
switch in the rear center console
c:> fig. 23 .
If you lock the vehicle using the power locking
switch , please note the following:
- If a door is open, the vehicle cannot be locked
using the power locking system switch.
- You cannot open the doors or the rear lid from
the
outside (increased security, for example
when you are stopped at a red light).
- The diodes in the power locking switch illumi­
nate when all the doors are closed and locked.
Opening and closing
-Front doors: you can unlock and open the doors
from the inside by pulling on the door handle.
- Rear doors: pull the door handle
once to re­
lease the lock. Pull the handle
again to open
the door.
- If you have a crash and the airbag is activated,
the doors automatically unlock.
A WARNING
-- The power locking switch works with the ig-
nition off and automatically locks the entire
vehicle when it is actuated.
- On a vehicle locked from the outside the power locking system switch is inoperative.
- Locked doors make it more difficult for
emergency workers to get into the vehicle,
which puts lives at risk. Do not leave anyone
behind in the vehicle, especially children.
(D Tips
-Your vehicle is locked automatically at a
speed of 9 mph (1S km/h) (Auto Lock)
¢
page 27. You can unlock the vehicle again
using the opening function in the power
locking system switch
Im.
- The rear power locking switch does not un­
lock the doors.
Setting power locking
Various settings can be adjusted in the MM!.
Adjusting door unlocking
• Select: !CAR ! button> (Car) Systems*> Vehicle
settings
> Central locking > Unlock doors -you
can specify which doors unlock when you open
the vehicle .
Selecting
All and pressing the~ button on the
remote control key unlocks the entire vehicle.
Selecting
Driver and pressing the~ button on
the remote control key once unlocks only the
driver's door. In vehicles with a convenience key*,
only the door whose handle you pull will unlock.
If you press the
[ru button twice, the entire vehi­
cle will unlock. If you press the~ button, the en-
tire vehicle will always lock. ..,.
31

Opening and clo sin g
Automatic luggage compartment lid
Applies to veh icles: w ith automat ic luggage compartme nt lid
The luggage compartment lid can be opened and
closed automatically .
•
~ al
--
F ig . 28 Luggage co mpartment lid: @clos ing button, @
l ock button (vehicles w ith conve nience key *)
Open ing th e lug gage comp artment lid
N 9 :::, GO ID
.. Briefly press the c:;; button on the remote con­
trol key . The rear lid will unlock.
.. To open the luggage compartment lid, press
the
c:J button on the remote control key for at
least one second.
.. Pull the button
c:;; in the dr iver's door
r::::> page33, fig. 27briefly. Or
.. Press the handle in the luggage compartment
lid ¢
page 33, fig . 26.
Closing the lugg age compartment lid
.. Pu ll the button c:J in the dr iver's door until the
luggage compartment lid is closed
r::::> &_ . Or
.. Press the b utton in the luggage compartment
lid
c:;; r::::> fig. 28. The luggage compartment lid
will automat ically close and lock
r::::> _A . Or
.. Press and hold the button
c::; on the master key
unt il the luggage compartment lid is closed
(vehicles with conven ience key*) ¢
_A. Or
.. Press t he
E'.l button in the luggage compart ­
ment lid
r::::> fig . 28 (veh icles with convenience
key*) . The remote control key must not be
more than app roximately 4 ft. (1.5 m) away
from the l uggage compartme nt and i t must not
be inside the vehicle . The luggage compart­
ment lid will automatically close and lock. The
vehicle locks ¢
_A.
34
Setting the luggage c omp artment lid open
posit ion
.. Bring the luggage compartment lid into the de­
sired open position . The position can be stored
at only one specific height .
.. Press and hold the
c:;; button for at least four
seconds and th is will store the des ired open po ­
sition . A visual and audio s ignal will follow .
.,. To se t a higher open pos it ion, wa it at least
five
seconds and then carefully press the luggage
compa rtment lid upward .
.. Press and hold the
c:;; bu tton again fo r at least
four seconds and this will sto re the new open
position .
The opening/clos ing process will stop immedi­
ate ly if:
- You p ull the
c::; button in the dr iver's door, or
- You release the
c:;; button on the remote co n-
trol master key (vehicles w it h convenience
key*), or
- You press the
c:;; button or@ button (vehicles
w ith convenience key*) in the luggage compa rt­
ment lid, o r
- You p ush the handle in the l uggage compa rt­
ment lid, o r
- You p ress against the luggage compartment lid
aga inst the direction it is moving, or
- when something blocks the luggage compart­ ment lid or makes it difficult for the lid to
move .
If you press the handle or one of the c:;; or rfl but ­
tons (vehicles with convenience key*) now, the
luggage compartment lid will either open or
close, depend ing on wha t angle it was at.
If you pull lightly on its handle, the rear lid will close .
You can manually stop the automatic open ing/
closing of the luggage compartment lid. The au­
tomat ic closing process beg ins if you push down
on the rear lid .
,8. WARNING
- Never close the rear lid inattentive ly or w ith-
out checking fi rst. Al tho ugh the clos ing
~

Lights and Vision
Exterior Lighting
Switching lights on and off
Fig. 35 Instrument panel: l ig ht switc h
Light switch ·'!;5-·
Turn the switch to the corresponding position.
When the lights are switched on, the ;oo: symbol
turns on.
0 -lights off. On some market-specific vers ions,
the daytime running lights* will switch on when
the ignition is switched on in this position .
-USA model s: the daytime running lights switch
on automatically when the ignition is switched
on and the light switch
c::> fig. 35 is in the O po­
s it ion or the
AUTO position (only in daylight).
The
Daytime running lights can be switched on
and off in the radio or the MMI*
c::> page 41,
i:::> A .
-Canada models : the daytime runn ing lights
switch on automatically when the ignition is
switched on and the light switch
c::> fig. 35 is in
t h e
O positio n, :oo: or the AUTO position (only in
daylight)
i:::> A .
AUTO*· Automatic headlights switch on and off
depend ing on br igh tness, fo r example in tw ilight,
du ring rain or in tunne ls .
c::> A .
coo: - Parking light
~D · Low beam headlights
~· All weat her ligh ts. T urn the swi tc h to parking
.... light :oo: or low beam head light ~D. Pull the
N
g switch up to the first notch (D.
CX)
.... I.Cl U"I
N I.Cl ....
Lights and V ision
@ii -Rear fog ligh ts. T urn the swi tch to parking
light ;oo : or low beam headlight
tD . Pull the
switch up to the second notch@.
All -weather lights
T he front lights a re adjusted au toma tica lly so
t h at there is less g lare fo r the d river from his o r
her ow n lights, for example whe n roads are we t.
Automatic dynamic headlight range control
system
Yo ur vehicle is equ ipped wi th a headligh t range
contro l system so that the head lig hts do not
blind oncoming traff ic if the vehicle load
changes . The head light range also ad justs auto ­
matically when brak ing and accelerating .
Static corne ring light*
T he stat ic co rnering light depe nds on equipmen t
and on ly works when the light switch is in the AU­
T O posit ion . The corner ing light sw itches on a u­
tomat ically at speeds up to approximately
44 mp h (70 km) when the steering wheel is at a
ce rtain ang le . The area to the side of the vehicle
is illum inated better when tur ning .
.,&. WARNING ,~ -- Automatic headlights* are o nly inten ded to
assist the driv er. They do no t reli eve t he
dr iver of resp onsib ility to check the hea d­
light s and to tur n them on m anual ly a ccord­
i n g to the curren t light an d visib ility condi ­
tion s. Fog, for examp le, cannot be detected
by the light se nsors *. So always switch o n
the low beam under these weather condi ­
tions and when driving in the dark ~D.
- The rear fog lights sho uld only be turned on
in acco rdance w ith traffic regulations, to
prevent glare for traffic behind your vehicle.
- Please observe lega l reg ulat ions w hen us ing
the lighting systems desc ribe d.
(D Note
The rea r fog lights shou ld on ly be t urne d on in
accordance with traffic reg ulations, to pre­
vent glare for traffic behind your vehicle .
39

Lights and Vision
(D Tips
-The light sensor for the automatic head­
lights* is in the rearview m irror mount.
Therefore, do not place any stickers in this
area on the windshield.
- Some of the exterior lighting functions can be adjusted
c:-page 41.
-If you turn off the ignition wh ile the exter ior
lights are on and open the door, you will
hear a warning tone.
- In cool or damp weather, the inside of the
headlights, turn s ignals and tail lights can
fog over due to the temperature d ifference
between the inside and outs ide . They will
clear short ly after sw itch ing them on . This
does not affect the serv ice life of the light­
ing .
Turn signals and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher.
8 N 0
~
F ig . 36 Turn s ig nal and h ig h bea m lever
Turn signals ¢ Q
With the ignition on, the signal lights w ill blink if
the lever is in the corresponding position.
(!) -righ t turn signal
@ -left turn s ignal
The turn s ignal blinks three times if you just tap
the lever.
High beam s and headlight flasher ~D
Move the lever to the co rrespo nd ing posit ion:
@ -high beams on (ve hicles w ith high beam as­
sis t*
c:-page 40
40
@ -high beams off or headlight flasher
The ind icator light
II in the instrume nt cl uster
turns o n.
Notes on these features
- The turn signals only work w ith the ignition
turned on . T he indicator lights . or
II in the
instrument cluster also bli nk.
- After you have tu rned a corner, the tu rn signa l
sw itches off automat ica lly .
- The
high beam works only when the head lights
are on . Th e ind icator light
Bl in the instrumen t
cl uste r ill um ina tes when the high beams a re
on.
- The
headlight flasher works o nly as long as yo u
hold the leve r - even if there are no lights
sw itched on . The ind icator light
II in the in­
s trumen t clus te r i lluminates whe n you use the
head light flasher.
&_ WARNING
D o not use t he high beam or head light f lasher
if you know that these could blind oncoming
traffic.
Headlight assist
Applies to vehicles: wit h headlight assistant
The headlight assistant automatically turns the
high beams on or off depending on the surround­
ing conditions .
Fig. 3 7 Turn s ig nal a nd hi gh beam lever: Tu rnin g headl ig ht
ass istant on/off
Activating headl ight assi stant
Requireme nt: the light sw itch must be in the AU -
TO positio n. .,.

~ To activate the headlight assistant, tap the lev ­
er forward (!). The indicator light
ii appears
in the instrument cluster disp lay and the head­
lights are switched on/off automatically. The
SI indicator light also turns on if the high
beams are switched on .
Switching the high beams on/off manually
If the high beams did not switch on/off automat­
ically as expected, you may switch them on or off
manually instead:
~ To switch the high beams on manually, tap the
l ever forward (!). The
SI indicator light turns
on.
~ To switch the high beams off manually, pull the
lever back@. The headlight assistant is deacti­
vated .
Operating the headlight flasher
~ Pull the lever into position @to operate the
headlight flasher when the headlight assist is
activated. The headlight ass istant remains ac­
tive.
Messages in the instrument cluster display
Headlight assist: System fault!
Drive to an authorized Aud i dea ler or a uthorized
Aud i Serv ice Fac ility immediately to have the
malfunction corrected. You can still switch the
high beams on or off manually.
Headlight assist: Unavailable. No camera view
The camera view is blocked, for example by a
sticker or debris .
The sensor is located between the interior rear­
view mirror and the windshield . Therefore, do not
place any st ickers in this area on the windshield .
A WARNING
Headlight assistant is only intended to assist
the driver. The driver is still responsible for
controlling the headlights and switching
them manually depending on light and visibil­
ity conditions. It may be necessary to operate
them manually in situations such as:
- In adverse weather conditions such as fog,
heavy ra in, b lowing snow or spraying water.
Lights and Vision
-On roads where oncoming traffic may be
partially obscured, such as expressways.
- When there are road users that do not have
sufficient lighting, such as bicyclers or
veh icles with dirty tail lamps.
- In tight curves and on steep slopes.
- In poorly lit areas.
- With strong reflectors, such as signs .
- If the area of the windshield near the sensor
is fogged over, dirty, icy or covered with a
s ticker.
Adjusting exterior lighting
The functions are selected in the radio or MMI*.
~ Select: !CAR ! function button> (Car) Systems*
control button > Vehicle settings> Exterior
lighting .
Coming home (lights when leaving car}*,
Leaving home (lights when unlocking car)*
The coming home function illumi nates the area
around the vehicle when the ignition is switched
off and the driver's door is opened. Depending on
vehicle eq uipment, the function can be switched
on and off or the length of time the lights remain
on* can be adjusted .
T he
leaving home function illuminates the area
around the vehicle when unlock ing it. Thi s func­
tion can be switched on and off.
The
coming home and leaving home functions
only operate when it is dark and the light switch
is i n the AUTO posit ion ~
page 39, fig. 35.
Daytime running lights
USA models:
You can switch the daytime running
l ights
on and off .
Canada models:
The function cannot be turned
off. It is activated automatically each time the ig­
nition is switched on .
41

Lights and Vision
Emergency flashers
Fig. 38 Cente r console: eme rge ncy flasher sw itc h
The emergency flashers makes other motorists
aware that you or your vehicle are in an emergen ­
cy s ituation .
.. Press the switch
l1J c> fig. 38 to turn the emer-
gency flashers on or off.
When the em ergency f lashers are on , a ll four
turn signals blink at the same time. The turn sig­
na l indicator lights
BIB in the instrument clus­
ter, as well as the light in the emerge ncy flasher
sw itch ~ blink likewise .
You can indicate a lane change or a turn when the emergency flashers are sw itched on by using the
turn sig nal lever . The emergency flashers stop
temporar ily.
The emergency flashers also wo rk when the igni­
tion is turned off.
The emergency flashers wi ll tur n on a utomat ica l­
ly if you are in an accident where th e airbag has
dep loyed.
@ Tips
You s hou ld t urn on the emergency flashers
when :
-you are the last veh icle standing in a traffic
j am so that any other ve hicles coming can
see you, o r when
- your ve hicle has broke n down or you are in
an emergency situation, o r when
-your ve hicle is being towe d by a tow truck or
if you are towing another vehicle behind
you.
42
Interior lighting
Front/rear interior lighting
Fi g. 39 Front head liner: interio r li ghtin g con trols
Fi g. 40 Rea r h eadl iner: LED re ad in g li ghts•
Press t he applicable button :
~ -Inter io r l ight ing on/off
[!] . Door cont act swi tch on/off . T he inter io r li ght­
i ng is controlled automa tic a lly .
~- Reading lights* on/off
Interior lighting
There are ot her inter ior light ing f unct ions that
are avai lable. Some funct ions can be adjusted in
the MMI. Select:
l cAR ! function button > Car sys ­
tems *
contro l butto n > Vehicle settings > Interi­
or lighting .