2016 AUDI A3 CABRIOLET headlights

Instrumen ts and ind icator ligh ts
Instruments and indicator Lights
Instruments
Instrument cluster overview
The instrument cluster is the central information center for the driver.
Fig. 3 Instrument cluster overv iew
(D Tachometer with indicator lights
- with
OFF status indicator .... .
- with
RE ADY status indicator .. .
@ Engine coolant temperature gauge
@ Turn signal indicator lights
© Disp lay
- Indicator lights or ...... ... .. . 10
68, 70
68, 70
12
12
- Drive r informat ion system . . . . . 23
- Date and time . . . . . . . . . . . . . . . 10
- Mileage . . . . . . . . . . . . . . . . . . . . 11
- Service interval display . . . . . . . 202
® Speedometer w ith ind icator lights
@ Fue l level ...... ........... .. .
11
0 Display for : centra l indicator light
or system displays ............ . 12
@ Trip odometer reset button 10.01 11
@ Tips
The needles in the instrument cluster illumi­
nate when the ignition is switched on . The di­
als a lso illuminate when the lights are switch­
ed on. The instrument illum ination d ims au­
tomatically as the amount of light outside de­
creases. T his he lps to remind the dr iver to
10
turn the headlights on as it becomes darker
outside.
Setting the time/date
Fig . 4 Instrument cluster: time and date
The date, time of day, time and date format can
be set in the MMI. For more information, refer to
your MMI Operating Manual.
Tachometer
The tachometer displays the engine speed in rev­
olutions per minute (RPM).
The beginning of the red zone in the tachometer
indicates the maximum permitted engine speed .,,_

Instruments and indicator lights
Coolant temperature indicator
The coolant temperature indicator@¢ page 10,
fig . 3
only works when the ignition is switched
on. To prevent engine damage, please observe
the following notes about the temperature rang­
es.
Cold range
If only the LEDs at the bottom of the gauge turn
on, the engine has not reached operating tem­
perature yet. Avoid high engine speeds, full ac­
celerating and heavy engine loads.
Normal range
The engine has reached its operating tempera­
ture once the LEDs up to the center of the gauge
turn on under normal driving conditions. The
LEDs higher up may turn on if the engine is under
heavy load or the outside temperature is high.
This is no cause for conc ern as long as the. in­
dicator light in the instrument cluster does not
turn on.
Hot range
If the LEDs in the upper area of the display and
the . indicator light in the instrument cluster
display turn on, the coolant temperature is too
high
¢ page 16.
A WARNING
-Never open the hood if you can see or hear
steam or coolant escaping from the engine
compartment. This increases the risk of
burns. Wait until you no longer see or hear
steam or coolant escap ing .
- The engine compartment in any vehicle can
be a dangerous area. Stop the engine and
allow it to cool before working in the engine
compartment. A lways follow the informa­
tion found in ¢
page 188, Working in the
engine comportment.
(D Note
- Auxiliary headlights and other accessories in
front of the cooling-air intake impair the
cooling effect of the coolant. This increases
the risk of the engine overheating during
12
high outside temperatures and heavy en­
gine load.
- Th e front spoiler also helps to distribute
cooling air correctly while driving. If the
spoiler is damaged, the cooling effect will
be impaired and the risk of the engine over­
heating will increase. See an authorized
Audi dealer or authorized Audi Service Fa­ cility for assistance .
Indicator lights
Description
The indicator lights in the instrument cluster
blink or turn on. They indicate functions or mal­
functions.
Messages may appear with some indicator lights.
A warning signal will sound at the same time. If
there is more than one malfunction, the indicator lights will turn on one after the other for a short
time . The indicator lights and messages in the in­
strument cluster display can be covered by other
displays .
The messages can be displayed again in the driv­
er information system*. With the multifunction
steering wheel, select the tab for indicator lights
and messages
c:> page 24 .
Some indicator lights in the display can display in
several colors.
& Central indicator light
If the . or D indicator light turns on, check
the instrument cluster display for more informa­
tion.
App lies to: vehicles wi th mo nochrome disp lay
If a message appears together with a central in­
dicator light. or
D. the central indicator light
will indicate the priority of the warning. If a
white indicator light also appears , the central in­
dicator light will have its own color . For example,
i'"
@I ::ippears together with., read the descrip­
tion for •.

Instruments and indicator lights
Audi dealer or authorized Audi Service Facility im­
m ediately to have the malfunction corrected.
~ i. Engine oil level (min .)
Ill Check oil level
You may continue driving for the time being.
Check the engine oil level as soon as possible
r::!) page 191.
-If the engine oil level is too low, add engine oil
¢page 193 .
-If the engine oil level is correct and the indica­
tor light st ill turns on, drive at low engine
speed to an authorized Audi dealer or author ­
ized Audi Service Facility.
~ .... Engine oil sensor
• Oil level sensor: system fault!
The sensor to check the engine oil level has
failed. Drive to an authorized Audi dealer or au­
thorized Audi Service Facility immediately to have
the malfunction corrected.
(D Note
Refer to the description in the Owner's Man­
ual ¢
page 193, Checking the engine oil level
and adding oil.
Bil Tank system
D Please refuel
If the indicator light turns first turns on and this
message appears, the tank contains the follow ­
ing amount of fuel :
- Front wheel drive: approximately 1.8 gallons (7
liters)
- All wheel drive: approximately 2.2 gallons (8.S
liters)
D Please refuel immediately
If the indicator light turns on the message ap ­
pears, the fuel tank is almost empty . Refuel the
vehicle immediate ly.
D Fuel tank malfunction! Please contact Serv­
ice
20
If the indicator light turns on and this message
appears, there is a malfunction in the tank sys­
tem.
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediately to have the
malfunction corrected .
@ For the sake of the environment
Fuel should never enter the sewer system or
come into contact with the ground.
(D Tips
More information on refueling is available on
page
¢page 185.
.. Washer fluid level
C·w$ Please add washer fluid
Fill the washer fluid for the windshield washer
system and the headlight washer system* when
the ignition is switched off¢
page 202.
• Windshield wipers
m Windshield wiper: system fault!
There is a malfunction with the windsh ield wip­
ers .
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediate ly to have the
malfunction corrected .
~ Defective light bulb warning
Applies to: vehicles with driver info rmation system
If the J:i indicator light turns on, a bulb has
failed . The message indicates the location of the
bulb.
Replace the bulb immediately.
Vehicle lights: system fault!
There is a malfunction in the headlights or the
light switch. Drive to an authori zed Audi dealer or
authorized Aud i Service Facility immediately to
have the malfunction corrected .
...

<( co .... N ,.__
N .... 0 ,.__
> co
A WARNING 1=
- Light bu lbs are under pressu re and can ex-
plode when bulbs are replaced, which in­
c reases the risk of injury.
- With gas-disc harge lamps" (xe no n head­
lights), the hig h-voltage component mus t
be hand led ap propr iately. Otherw ise, t her e
is a r is k of fatal in jury.
-
~(i) Dynamic Headlight range control system
App lies to: vehicles with Xenon headlights
El Headlight range control : sy stem fault!
There is a malfunction in the dy namic headlight
range cont rol sys tem, w hich may cause glare for
o ther driv ers .
Drive to an authorized Aud i dea ler or a uthorized
Aud i Service Fac ility immediately to have t he
mal funct ion corrected .
~O Audi adaptive light
Applies to: vehicles with Audi adaptive light
m;J Audi adaptive light: system fault!
There is a malfunction in the adapt ive lights. The
h eadlights still f unction .
Drive to an autho rized Aud i dea le r or a uthorized
Aud i Service Faci lity immediately to have the
malfunct ion corrected.
~ D Light/rain sensor
App lies to: vehicles with light/rain sensor
II Automatic headlights: system fault!
El Automatic wipers: system fault!
The ligh t/ra in senso r is ma lfunct io ni ng.
The low beams remain swi tched on at all times
fo r safety reasons when t he lig ht switch i s in the
AUTO posi tion. You can con tinue to tur n t he
lights on and
off usi ng the light swi tch . You can
still control a ll wiper functions that are inde ­
pendent of the ra in sensor .
Dr ive to an a utho riz e d Aud i de aler o r au thor ized
Aud i Service Faci lity immediately to have t he
malfunct ion corrected.
Instruments and ind icator lights
Q Adaptive dampers
Applies to: vehicles with Audi drive se lect
II Su spension : system fault!
The re is an adapt ive damper malfunction .
Drive to an authorized A udi dealer or authorized
A udi Se rvice Facility immed iate ly to have the
malfunction corrected.
¢i ¢ Turn signals
If the . or. in dicator light blinks, a tur n sig­
nal is tu rned on .
If both indicato r ligh ts a re blink­
i ng, t he e mergency flas hers are on .
In an ind icator light blinks tw ice as fast as usual
t h en a bli nke r bulb has fa iled. Carefu lly drive to
an a uth o rize d Aud i deale r or a uth ori zed Aud i
Se rvice Facility i mmed iate ly to have the ma lfu nc­
t ion co rre cte d.
(D Tips
Fo r mor e information o n the turn signa ls, re­
fer to
q page 4 5 .
On-Board Diagnostic
system (OBD)
System indicator light (MIL)
The system indicato r ligh t (M IL) ¢4 in t he instru­
me nt cl uster is part of the O n Boar d D iagnostic
System (O BD II).
T he warn ing/i nd icator lig ht tu rns on when the ig ­
ni tion is sw itched on and tu rns
off once the en­
gine is started a nd is r unning in idle at a s tab le
s p eed. This in dica tes t hat the MIL is f un ct io ning
correc tly.
If the light does not turn off after starting the
engine
o r tur ns o n while d riv in g, this may ind i­
ca te there is a m alfunction in the en gine . If the
i ndica tor t urns o n, the cat alytic conve rter m ay be
damaged.
Dr ive
with reduced engine performance (avo id
hig h speeds for exte nded per io d s of t ime and/o r .,.
21

Lights and Vision
Exterior Lighting
Switching lights on and off
Fig. 40 Instrument panel: l ig ht switc h (example)
The headlights only work when the ignition is
switched on . The headlights turn
off automati­
cally when the engine is switched on or when the
i gn it ion is switched off . Only the side-marker
l ights stay on.
A warning symbol will appear in the driver infor­ mat io n disp lay if the system is not f unction ing
correctly
¢ page 21.
Light s witch ·'ti- ·
Turn the switch c:> fig. 40 to the corresponding
position . When the lights are switched on, the re·
spective symbol turns on .
0 -lights off . In some countries, the day time
running lights* are turned on and
off together
with the ign ition.
- USA model s: the daytime running lights switch
on automatically when the ignition is switched
on and the light switch <=>
fig. 40 is set to the 0
or the AUTO position (only in daylight) . The
Daytim e runn ing ligh ts can be switched on and
off in the MMI ¢ page 45 ¢ .&. .
-Canada model s: the daytime running lights
switch on automatically when the ignition is
switched on and the light switch ¢
fig. 40 is in
the
O posit ion, :oo: or the AUTO position (on ly in
daylight)
c:> ,&. .
;;§ AUTO* -automatic headlig hts switch on and off .....
~ depending on brightness, for example in tw ilight ,
8 during ra in or in tunne ls. In veh icles with inte-
S; g rated day time running lights*, ei ther the day-co
Lights and V ision
t ime running lights or the headlights will turn on
automatica lly, depending on the amo unt of light
(may vary depending on the country) .
:oo: -Par king ligh ts
io -Low beam headlights
The following will happen in these light switch pos itions w hen you lock the vehicle:
- iD -Low beam headlight: the entire exterior
lighting is switched
off
- AU TO *: the Coming home* function is turned
on
¢ page 45
Fog lights* /rear fog light(s )
Press the correspondi ng b utton c:> fig. 40:
tO -Front fog lights* (not pictured) . This b utton
rep laces the b utton for all-wea ther lights
When the fog lights are sw itched on, the tO sym­
bol in the b utton ill umin ates .
0$ -Rear fog light(s) When the rea r fog lights are
swi tched on, the
0$ symbo l in the b utton illumi­
nates.
All-weather light s*
Apples to : vehicles wit h LED he adlights.
Press the corresponding button ,;ii o ¢ fig. 40 on
the light switch :
"1~D -All-weather lights . The symbol "11D in the
button lights up when all-weather lights are
switched on.
In vehicles with all -weather lights, the front
lights are adjusted automatically so that you are
less likely to see g lare from your own headlights,
for example whe n driving on a wet road.
Headlight range control system
The headlight range adjusts a utomat ically when
t h ere is a change in ve hicle load and during brak­
ing and accelerating so that the headlights do
not cause glare for oncoming traffic.
Audi adaptive light*
T he ada ptive lig ht only functions when the light
switch is in the AUTO pos ition . You can deactivate
adaptive light in the MMI
¢ page 45 . ..,.
43

Lights and Vision
When switched on, adaptive light adjusts to
curves depending on the vehicle speed and steer­
ing wheel angle. This provides better lighting
through the curve. The system operates in a
speed range from approximately 6 mph (10 km/
h) to 68 mph (110 km/h) .
Static cornering light* -the cornering light
switches on automatically when the steering
wheel is turned at a ce rtain angle at speeds up to
approximately 44 mph (70 km/h) and when the
turn signal is activated at speeds up to approxi­
mately 25 mph (40 km/h) . The area to the side of
the vehicle is illuminated better when turning.
Speed dependent light distribution* -The speed
dependent light distribution adapts the light in
towns and on highways or expressways . Intersec­
tions can also be illuminated on vehicles with a
navigation system* .
Highway light function*
This function adapts the lighting for highway
driving based on vehicle speed .
A WARNING
-Automatic headlights* are only intended to
assist the driver. They do not relieve the
driver of responsibility to check the head­
lights and to turn them on manually accord­
ing to the current light and visibility condi­
tions. For example, fog cannot be detected by the light sensors . So always switch on the
low beam under these weather conditions
and when driving in the dark ~D.
- Accidents could occur if you can not see the road ahead of you well and if others on the
road cannot see you . Always switch your
headlights on so that you can see the road
ahead of you and others can see your vehicle
from behind.
- The rear fog lights should only be turned on
in accordance with traffic regulations, to
prevent glare for traffic behind your vehicle.
-If the battery has been discharging for a
while, the parking light may switch off auto­
matically. Always make sure your vehicle is
parked and adequately lit according to the
44
laws. Avoid using the parking lights for sev­
eral hours.
- Please observe legal regulations when using
the lighting systems described.
(D Tips
- The light sensor for the automatic head­
lights* is in the rearview mirror mount.
Therefore , do not place any stickers in this
area on the windshield.
- Some exterior lighting functions can be ad­
justed
Q page 45.
- If you turn off the ignition while the exterior lights are on and open the door, you will
hear a warning tone.
- In some market-specific versions, the tail
lights do not turn on when switching on the
daytime running lights .
- In cool or damp weather, the inside of the
headlights, turn signals and tail lights can
fog over due to the temperature difference between the inside and outside. They will
clear shortly after switching them on . This
does not affect the service life of the light­
ing.
-A message will appear in the instrument
cluster if there is a malfunction in the light
sensor
Q page 21 .
Emergency flasher
Fig. 41 Ins trumen t panel: e merge ncy flasher butto n
The emergency flashers makes other drivers
aware of your vehicle in dangerous situations.
.,. Press the~ button to switch the emergency
flashers on or off .

<( co ..... N
" N ..... 0 r--. > 00
You can indicate a lane change or a tu rn when the
emergency flas hers are sw itche d on by us ing the
turn sig nal lever . The emergency flashers stop
tempo rarily.
The emergency flashers also work when the igni ­
tion is tur ned off.
@ Tips
You should s witch the e merge ncy fla shers on
if:
- Y ou a re the la st c ar in a tra ffic j am so th at
a ll ot her vehicles appro ach ing from be hind
ca n see you, or if
- You r vehicle has br oke n do wn or y ou ar e
h aving an eme rgency, or i f
- Y our vehi cle is bei ng towe d or if yo u are
tow ing anot her vehicle.
Turn signal and high beam lever
The Lever operates the turn signals, the high
beams and the headlight flasher.
F ig . 42 Turn signal an d high bea m lever
Turn signals ¢i ¢
The turn s ignals activate when you move the lev­
er into a turn s ignal position w hen the ignition is
switched on.
(D -Tur n signa l
@-Tur n sign al
The tu rn s ignal bl inks three times if you tap th e
l eve r (conve nience turn s ignal) .
High beams and headlight flasher ~D
Move the lever to the correspond ing posit ion:
@ -high beams on
Lights and V ision
@ -high beams off or he adlight flasher
T he
El in di cato r light in t he inst rument cl uste r
tu rns o n.
_& WARNING
H ig h be ams can cau se gla re fo r ot her dr ivers,
which increases the risk of an accident. Fo r
this reason, only use the high beams or the
h eadlight flasher when they will not create
g la re for ot her dr ivers.
Adjusting the exterior lighting
The settings are adjusted in the MMI.
.,. Sele ct: the I MENU I but to n > Car > Systems *
control b utton > Vehicle settings > Exterior
lighting .
Automatic headlights
Yo u can adjust the following s ettings in the Au­
tomatic headlights
menu:
Activation time -you can adjust if the headlights
switch on
Early , Medium or Late accord ing to the
sensit ivity of th e light s ensor .
Audi adaptive light * -you can switch adaptive
li ght
On and Off .
Coming home, leaving home*
T he coming home f unction ill uminates the area
outside the vehicle when you turn the ignit ion off
and open the driver 's door. To turn the function
o n, select
Lights when leaving car > On .
The leaving home i llum inates the area outside
the vehicle when yo u unlock the vehicle. To turn
t h e function on , se lect
Lights when unlocking
car > On .
The coming home a nd leav ing home functions
on ly operate when it is dark and the light switch
is in the
AUTO pos ition.
Daytime running lights*
USA models:
t h e dayt ime run ning lights can be
switched on or off using the MM I. Select
On or
Off . ..,_
45

Lights and Vision
Canada models : this function cannot be switched
off . They activate automatica lly each time the ig­
n ition is switched on. T his menu item is shown
with a "gray background".
Travel mode*
The headlig ht beam is asymme trical. This pro­
vides stronge r ill uminat ion on the side of the
road on w hich you are driving . In ve hicles with
Xenon headlights* with tu rni ng light* or LED
headl ights* ,
you must adjust the headlights
when you are driv ing in a country where th e traf­
fic direction is oppos ite from your own country .
Otherw ise, oncoming traffic will be blinded by
the glare from the headlights . An a djustment is
not needed in veh icles with Xenon headlights
w it h out t urni ng lig hts .
To prevent glare:
- Travel mode must be activated in vehicles w ith
Xenon headlights* and turning light* or LED
headlights*. Select: the
I M ENU I button> Car >
Sy stem s*
cont rol button > Vehicle settings >
Exterior lighting > Light for driving on left , for
example .
After you have adjusted the headlights , the fol­
low ing message w ill appear:
II Headlight converter active for driv ing on
left. Range reduced!
(D Tips
When travel mode is activated, a disp lay in
the dr ive r information system indicates this
each t ime you switch the ignition on.
46
Interior lighting
Interior lights
Fi g. 43 Headliner: interior ligh ts, version 1
Fig. 44 Headline r: inte rior l ights, ve rs io n 2
~ Reading lights
.,. Ve rsion 1 :
to turn a reading light on or off,
press the
l!J button c:> fig. 43.
.,. Version 2 (touch-sensitive read ing lights w ith
manual dimming function *):
To switch a read­
ing light on/off, briefly touch t he surface @
c:>fig. 44 .
.,. To acti vate the m anual dimmi ng f unc tion,
t o uch the s urfa ce @ when the ligh t is switched
off and keep touchi ng it un til the desired
brightness is reached.
[!I Door contact switch
.,. To have the in te rior lig hts contro lled automati -
cally, p ress the
I!] b utt on.
Interior lighting*
You can adjust the brightness of the inter ior
ligh ting . In the MMI*, select: the
I MENU I button
>
Car > System s* control but ton > Vehicle s et­
tings > Interior lighting .
The interior light ing turns on when you sw itch
the headlights on w hile the ignition is on.