2016 AUDI A3 CABRIOLET lock

<( co ..... N
" N ..... 0 r--. > 00
distance from the power top to reduce the
risk of injury.
- When operating the power top, visibility to
the rear is limited. Avoid operating the top
while driving in reverse .
(D Note
- To prevent damage to the power top:
- do not store any objects in the power top
storage compartment.
- make sure there is enough space above
the vehicle when opening or closing the
power top.
- To reduce the risk of damage, make sure
there are no sensitive objects in the power
top storage compartment's range of mo­
tion.
(D Tips
- To prevent the battery from draining unnec­
essarily, do not open or close the power top
repeatedly when the engine is switched off.
- A message will appear in the instrument cluster if there is a malfunction in the power
top
~ page 38.
- The power top can also be operated manual­ ly temporari ly if there is a malfunction
~ page 40, Power top emergency opera­
tion.
An authori zed A udi dealer or au thor­
i zed Audi Service Facility should diag nose
and correct the cause of the malfunction as
soon as possib le .
- If the vehicle is parked with the power top open, the vehicle interior is not protected
from damaging weather or unauthorized ac­
cess. Lock any items you leave behind in the
luggage compartment. Close the power top
before leaving the vehicle.
- The side windows automat ically lower
slightly when opening or closing the power
top.
P owe r top
Power top convenience opening and closing
Fig. 26 Turning the key to open and close
Con ven ien ce opening with the dri ver door
lock
g: 0
0
>
18
.,. Turn the key once in the driver door lock to the
open ing position @ Q
fig. 26.
.,. Turn the key to the opening position again
within tw o seconds and hold it there unti l the
power top opens comple tely.
Conven ienc e closing with the driver door lock
.,. Turn the key once in the driver door lock to the
clos ing pos ition @Q
fig. 26.
.,. Turn the key to the closing position again w ith­
in two second s
and ho ld it there un til the pow­
er top or a ll the windows close comp letely .
Convenience closing with the convenience
ke y*
.,. Touch the senso r* in one of the door hand les.
Do not place your hand in the door handle when
doing this.
.,. Touch this sensor * a second time
w ith in tw o
sec ond s
and keep touching it unt il the power
top or a ll windows are closed completely. Do
not place your hand in the door handle when
doing this .
The opening or closing process will stop
imm ed i­
ate ly
if you re lease the key or stop touching the
sensor*.
A WARNING
Read and follow the important safety precau­
tions
~ .&. in Opening and closing the power
top on page 36 .
37

<( co ..... N
" N ..... 0
" > 00
the vehicle speed and operate the power top
again.
Soft top system malfunction! You can continue
driving
This message appears if there is a malfunction in
the system. Try to open or close the power top
again .
If the message still appears, have the mal­
function corrected by an authorized Aud i dealer
or authorized Audi Service Facility.
Soft top system malfunction! You can continue
driving
This message appears if there is a malfunction in
the system . Try to open or close the power top
again. If the message st ill appea rs, then have an
authorized Audi dealer or authorized Audi Se rvice
F acility correct the malfunction. Do not dr ive
more than 30 mph (SO km/h) until it is correct­
ed .
A WARNING
Never drive when the power top is not locked
correctly. The w ind from driving cou ld cause
the power top to open. This can result in inju­
r ies and damage to the vehicle.
Wind deflector
A ppl ies to: ve hicles with wind defl ecto r
The wind deflector reduces air movement in the
passenger comportment in order to make driving more comfortable.
F ig . 29 Rea r of the vehicle: inse rting t he wind deflector (1)
Power top
~ a, N 0 > a, m
Fig. 30 Rear of the vehicle: inserting the wind deflecto r (2)
The wind deflector is located in the luggage com­
partment in a storage bag*.
Inserting and positioning the wind deflector
.,. Open the rear window on the passenger's side.
.,. Remove the wind deflector from the luggage
compartment and fold it apart once . The w ind
deflector is installed in the correct position
when the long side is toward the front and the
w ind deflec tor frame is at the top.
.,. Insert both pins on the wind deflector
(D
c> fig. 29 into the mounts in the side trim on
the driver's side.
.. Fold the handle @upward and lift the center
of the wind deflector slightly @ c>
fig. 30.
.,. Now guide the wind deflector into the mounts
on the passenger's side © and press lightly in
the middle of the wind deflector ® until the
handle locks in place .
.,. Raise the wind deflector completely.
Removing the wind deflector
.,. Fold the handle @c> fig. 29 upward and fold
the wind deflector frame back .
.,. Fold the handle@c>
fig. 29 upward and lift the
center of the wind deflector sligh tly @
c>
fig. 30 .
"Remove the wind deflector from the mounts in
the side trim on the passenger's side .
.. Pull the wind deflector out of the mounts on
the dr iver side and lift it out .
.. Fold the wind deflector together and store it
securely.
A WARNING
- Do not use the wind deflector to secure car-
go.
~
39

Power top
-Be careful when installing so you do not
pinch your fingers.
- Pay attention to the traffic when installing
the wind def lector. Install the w ind deflec­
tor from the s ide of the vehicle that is away
from traffic.
(D Note
Do not lean against the veh icle when instal­
ling the wind deflector. Hard objects and dec­
orations on clothing such as belt buckles can
scratch the pa int.
{!) Tips
- The wind deflector works best when a ll of
the w indows are rolled up wh ile driving.
- Only store the wind deflector in the storage
bag* when it is dry.
Power top emergency
operation
General information
The power top con be closed manually if there is
o malfunction.
• Set the parking brake.
• Open all windows.
• Switch the ignition off.
• Pull the button@ for approximately 10 to
15 seconds to reduce th e pressure in the power
top hydraulics ¢
page 36, fig. 25.
Only close the power top m anually in an eme r­
gency . Have a second person assist . Drive to an
author ized Audi dealer or author ized Audi Service
Facility immediately to have the malfunction cor­
rected.
A WARNING
- There is a r isk of pinching the hands or othe r
people during all of the power top emergen­
cy operat ion steps.
- Make sure a ll windows are lowered during
emergency ope ration.
- Do not reach into the power top suppor ts
or other moving components .
40
-Never drive when the power top is not
locked correct ly. The wind from driving
could cause the power top to open. This can
result in injur ies and damage to the vehicle .
{!) Tips
The power top storage compartment cover is
not latched after the emergency operation is
complete. Dr ive to an authorized Audi dealer
or authorized Audi Service Facility immediate­
l y to have the malfu nction corrected.
Step 1: Release the power top storage
compartment cover
Fig. 31 Rear seats fo lded forward : release loop for the
power top storage compartment cover
Fig. 32 Open ing the s ide covers
• Open the luggage compartment lid.
• Fold the rear seat backrests forward.
• Remove the wheel wrench from the vehicle tool
kit.
• Close the luggage compartment lid .
• Pull the release loop down from the rear to re­
lease the power top storage compartment cov­
er
¢ fig. 31.
• Slide the covers on both sides of the veh icle in
the direction of the arrow until they lock in
place
¢fig. 32.

<( co ..... N
" N ..... 0 r--. > 00
Step 2: Lift the power top storage
compartment cover out
Fig. 33 Lifting the power top storage compartment cover
out and setting up the supports
Fig . 3 4 Power top storage compartment cover: supports
set up
.,. Raise the power top compartment cover out of
the power top compa rtment and hold it in
place @~
fig. 33 ~,&. in General information
on page 40 .
.,. Secure the power top storage compartment
cover by pressing on the side supports on both
sides @.
A WARNING
-Always make sure that the side supports on
the open power top storage compartment
cover are in place, even when the power top
is not fully open or closed . Otherw ise, the
power top storage compartment cover could
fall, which increases the risk of an accident.
- Avoid making contact with the supports and
other moving parts when opening the power
top storage compa rtment cover.
If do you
make contact, your hands cou ld be pinched .
Powe r top
Step 3 : Open the locking pin
Fig. 35 Rear of the vehicle: opening the lock ing pin
.,. Remove the cap on the trip and insert the
wheel wrench into the opening .
.,. Turn the whee l wrench clockwise until it stops
to open the locking pin .
.,. Remove the wheel wrench.
A WARNING
When raising the power top storage bay cov­
er, avoid contact with the supports or other moving parts. Otherwise you could pinch your
hands.
Step 4: Close the power top
• •
•
Fig . 36 Rear of vehicle: closing t he power top (1)
Fig . 37 Rear of vehicle: closing the power top (2)
41

Power top
.,. Pos ition yourself near the vehicle .
.,. Hold the power top by its front edge and pull it
out completely ¢
fig. 36 ¢ A in General infor­
mation on page 40.
.,. Lift the rear edge of the power top.
.,. Release the power top storage compartment
cover by pu lling on the side supports to release
them .
.,. Close the power top storage compartmen t cov ­
er (!) and let the rear edge of the power top
drop @r::!;>fig .
37.
Step 5: Lock the power top
Fig . 38 W inds hield : closi ng t he powe r top
F ig . 39 Inside of the powe r top: lock ing the powe r top
.,. Press the power top onto the w indshield frame
r::!;> fig . 38 r::!;> _& in General information on
page 40 .
.,. Insert the wheel wrench into the opening and
turn it co unterclockwise unti l it stops
r::!;> fig . 39 .
.,. Remove the whee l wrench and seal the opening
with the cap .
.,. Put the whee l wrench back into the vehicle tool
k it
r::!;> page 230 .
42
A WARNING
-When positioning the powe r top , avoid con­
tact w ith the supports o r other moving
parts. Otherwise you could pinch yo ur
hands .
- When pressing the power top down onto the windshield frame, make s ure that you
do not pi nch yourse lf or anyone else .
@ Tips
Make sure the lock ing mechan isms are locked
securely .

Lights and Vision
Exterior Lighting
Switching lights on and off
Fig. 40 Instrument panel: l ig ht switc h (example)
The headlights only work when the ignition is
switched on . The headlights turn
off automati­
cally when the engine is switched on or when the
i gn it ion is switched off . Only the side-marker
l ights stay on.
A warning symbol will appear in the driver infor­ mat io n disp lay if the system is not f unction ing
correctly
¢ page 21.
Light s witch ·'ti- ·
Turn the switch c:> fig. 40 to the corresponding
position . When the lights are switched on, the re·
spective symbol turns on .
0 -lights off . In some countries, the day time
running lights* are turned on and
off together
with the ign ition.
- USA model s: the daytime running lights switch
on automatically when the ignition is switched
on and the light switch <=>
fig. 40 is set to the 0
or the AUTO position (only in daylight) . The
Daytim e runn ing ligh ts can be switched on and
off in the MMI ¢ page 45 ¢ .&. .
-Canada model s: the daytime running lights
switch on automatically when the ignition is
switched on and the light switch ¢
fig. 40 is in
the
O posit ion, :oo: or the AUTO position (on ly in
daylight)
c:> ,&. .
;;§ AUTO* -automatic headlig hts switch on and off .....
~ depending on brightness, for example in tw ilight ,
8 during ra in or in tunne ls. In veh icles with inte-
S; g rated day time running lights*, ei ther the day-co
Lights and V ision
t ime running lights or the headlights will turn on
automatica lly, depending on the amo unt of light
(may vary depending on the country) .
:oo: -Par king ligh ts
io -Low beam headlights
The following will happen in these light switch pos itions w hen you lock the vehicle:
- iD -Low beam headlight: the entire exterior
lighting is switched
off
- AU TO *: the Coming home* function is turned
on
¢ page 45
Fog lights* /rear fog light(s )
Press the correspondi ng b utton c:> fig. 40:
tO -Front fog lights* (not pictured) . This b utton
rep laces the b utton for all-wea ther lights
When the fog lights are sw itched on, the tO sym­
bol in the b utton ill umin ates .
0$ -Rear fog light(s) When the rea r fog lights are
swi tched on, the
0$ symbo l in the b utton illumi­
nates.
All-weather light s*
Apples to : vehicles wit h LED he adlights.
Press the corresponding button ,;ii o ¢ fig. 40 on
the light switch :
"1~D -All-weather lights . The symbol "11D in the
button lights up when all-weather lights are
switched on.
In vehicles with all -weather lights, the front
lights are adjusted automatically so that you are
less likely to see g lare from your own headlights,
for example whe n driving on a wet road.
Headlight range control system
The headlight range adjusts a utomat ically when
t h ere is a change in ve hicle load and during brak­
ing and accelerating so that the headlights do
not cause glare for oncoming traffic.
Audi adaptive light*
T he ada ptive lig ht only functions when the light
switch is in the AUTO pos ition . You can deactivate
adaptive light in the MMI
¢ page 45 . ..,.
43

<( co ..... N
" N ..... 0 r--. > 00
You can indicate a lane change or a tu rn when the
emergency flas hers are sw itche d on by us ing the
turn sig nal lever . The emergency flashers stop
tempo rarily.
The emergency flashers also work when the igni ­
tion is tur ned off.
@ Tips
You should s witch the e merge ncy fla shers on
if:
- Y ou a re the la st c ar in a tra ffic j am so th at
a ll ot her vehicles appro ach ing from be hind
ca n see you, or if
- You r vehicle has br oke n do wn or y ou ar e
h aving an eme rgency, or i f
- Y our vehi cle is bei ng towe d or if yo u are
tow ing anot her vehicle.
Turn signal and high beam lever
The Lever operates the turn signals, the high
beams and the headlight flasher.
F ig . 42 Turn signal an d high bea m lever
Turn signals ¢i ¢
The turn s ignals activate when you move the lev­
er into a turn s ignal position w hen the ignition is
switched on.
(D -Tur n signa l
@-Tur n sign al
The tu rn s ignal bl inks three times if you tap th e
l eve r (conve nience turn s ignal) .
High beams and headlight flasher ~D
Move the lever to the correspond ing posit ion:
@ -high beams on
Lights and V ision
@ -high beams off or he adlight flasher
T he
El in di cato r light in t he inst rument cl uste r
tu rns o n.
_& WARNING
H ig h be ams can cau se gla re fo r ot her dr ivers,
which increases the risk of an accident. Fo r
this reason, only use the high beams or the
h eadlight flasher when they will not create
g la re for ot her dr ivers.
Adjusting the exterior lighting
The settings are adjusted in the MMI.
.,. Sele ct: the I MENU I but to n > Car > Systems *
control b utton > Vehicle settings > Exterior
lighting .
Automatic headlights
Yo u can adjust the following s ettings in the Au­
tomatic headlights
menu:
Activation time -you can adjust if the headlights
switch on
Early , Medium or Late accord ing to the
sensit ivity of th e light s ensor .
Audi adaptive light * -you can switch adaptive
li ght
On and Off .
Coming home, leaving home*
T he coming home f unction ill uminates the area
outside the vehicle when you turn the ignit ion off
and open the driver 's door. To turn the function
o n, select
Lights when leaving car > On .
The leaving home i llum inates the area outside
the vehicle when yo u unlock the vehicle. To turn
t h e function on , se lect
Lights when unlocking
car > On .
The coming home a nd leav ing home functions
on ly operate when it is dark and the light switch
is in the
AUTO pos ition.
Daytime running lights*
USA models:
t h e dayt ime run ning lights can be
switched on or off using the MM I. Select
On or
Off . ..,_
45

<( co ..... N
" N ..... 0 r--. > 00
Instrument illumination
The brightness of the instrument cluster and the
center console can be adjusted .
Fig. 45 Instrumel'lt illumination
Requirement: the light must be switched on.
.. Press the knob to release it.
.. Turn the knob toward "-"or"+" to reduce or in­
crease the brightness.
.. Press the knob again to return i t to its original
position .
@ Tips
The needles and gauges in the instrument
cluste r illuminate when the headlights are off
and the ignition is switched on . The illumina­
tion reduces automatically and eventua lly
turns off as brightness outside decreases.
This function reminds the driver to turn the
headlights on at the appropriate time.
Vision
Adjusting the exterior mirrors
0
g
>
Fig. 46 Driver's doo r: knob fo r th e exterior mirrors (exam­
ple)
Turn the knob to the desired position:
a, (X)
Lights and V ision
0 -All adjustment functions are deactivated.
Q/P -adjusting the left/r ight exte rior m irror.
Move the knob in the desired direction.
(@ -Heat* the mirror glass depend ing o n the out­
s ide temperatu re.
8 -Folding exterior mirrors*. You can select if
the mirrors fold in automatically when you lock
the vehicle In the MMI*
q page 31.
Front passenger 's exterior mirror tilt
function*
To help you see the curb when backing into a
parking space, the surface of the m irror tilts
s li ghtly. For this to happen, the knob must be in
the position for the front passenger's outside
mirror .
You can adjust the tilted mirror surface by turn­
ing the knob in the desired d irect ion . When you
move out of reverse and into another gea r, the
new mirror position is stored and assigned to the
key you are using.
The mirror goes back into its or iginal position
once you drive forward faste r than 9 mph
(15 km/h) or turn the ignition off.
_& WARNING
Cur ved m irror surfaces (convex) enlarge the
f ield of vision. However, they make objects in
the m irror appear smaller and further away.
Your may estimate incorrectly when you use
these mirrors to gauge your distance from the
vehicles beh ind you when changing lanes -ac­
cident r isk!
(D Note
- Applies to vehicles with power fo lding out­
side mirrors*: if the mirror housing was
moved by outside forces (such as an impact
when maneuvering), you must use the pow­
er foldi ng function to fold the mirror all the
way out. You will hear a loud noise when the
mirrors are latched back in place. The mirror
housing must not be moved back into place
by hand because this would impair the func-
tion of the mirror mechanism. ..,.
47