2016 Alfa Romeo 4C Spider radio

WARNING!
•Remove any metal jewelry such as rings, watch
bands and bracelets that could make an inadvertent
electrical contact. You could be seriously injured.
(Continued)
WARNING! (Continued)
•Batteries contain sulfuric acid that can burn your
skin or eyes and generate hydrogen gas which is
flammable and explosive. Keep open flames or
sparks away from the battery.
NOTE: Be sure that the disconnected ends of the cables
do not touch while still connected to the other vehicle.
1. Firmly apply the parking brake, and turn the ignition OFF.
2. Turn off the heater, radio, and all unnecessary electri- cal accessories.
3. To remove the protective cover off the battery, pull upward on the cover.
Battery Location
6
WHAT TO DO IN EMERGENCIES 255

CavityVehicle Fuse Num-
ber Mini Fuse
Description
3 F53 7.5 Amp Brown Instrument Panel Node
4 F38 15 Amp Blue Central Door Locking
5 F36 10 Amp Red Diagnostic Socket, Vehicle Radio, TPMS, Alarm
6 F43 20 Amp Yellow Bi-Directional Washer
7 F48 20 Amp Yellow Passenger Power Window
9 F50 7.5 Amp Brown Airbag
10 F51 7.5 Amp Brown Headlamp Washer Relay, A/C Compressor Relay,
High Beam Relay, Parking ECU, Vehicle Radio,
Stop Lamp Switch
11 F37 7.5 Amp Brown Stop Light Switch, Instrument Panel Node
12 F49 5 Amp Tan Transmission Shifter Module, Cigar Lighter Light,
Drive Style Unit, Heated Mirrors Relay
13 F31 5 Amp Tan Climate Control, Body Controller
14 F47 20 Amp Yellow Driver Power Window
7
MAINTAINING YOUR VEHICLE 309

Owner’s Manual (Operator Manual)..........5,348
Paint Care ............................. .298
Parking Brake ........................... .195
Passing Light .............................94
Pets ....................................66
Pets, Transporting ..........................66
Placard, Tire And Loading Information ..........213
Power Door Locks ............................22
Mirrors ...............................77
Windows ..............................25
Pregnant Women And Seat Belts ...............39
Pretensioners Seat Belts ..............................39
Radial Ply Tires ......................... .220
Radio Frequency General Information ...................14, 21 Radio Operation
......................... .165
Reclining Front Seats .......................87
Recorder, Event Data .......................55
Recreational Towing ...................... .244
Reformulated Gasoline .....................237
Refrigerant ............................. .276
Reminder, Seat Belt .........................32
Remote Keyless Entry (RKE) Remote Keyless Entry (RKE) ................18
Unlock The Doors .......................19
Replacement Bulbs ....................... .310
Replacement Keys .........................14
Replacement Parts ........................ .269
Replacement Tires ........................ .228
Reporting Safety Defects ....................347
Restraint, Head ...........................88
Restraints, Child ...........................56
Restraints, Infant ..........................59
Restraints, Occupant ........................30
10
INDEX 363

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.