2016.75 VAUXHALL ASTRA J bulb

[x] Cancel search: bulb

Page 109 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual Instruments and controls1079 for several seconds. The ignition
must be switched on but engine not
running.
The system must be reset every time
the engine oil is changed to allow
proper functionality.

Page 123 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual Instruments and controls121
On Uplevel display press 9 on the
steering wheel to confirm a message.
Vehicle and service messages
The vehicle messages are displayed
as text. Follow the instructions give

Page 207 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual Driving and operating205The CO2 emission (combined) is
within a range of 142 to 88 g/km.
For the values specific for your
vehicle, refer to the EEC Certificate of
Conformity provided with your vehicle

Page 213 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual Vehicle care211Vehicle careGeneral Information...................211
Accessories and vehicle modifications .......................... 211
Vehicle storage ........................212
End-of-life vehicl

Page 221 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual Vehicle care219Wiper blade replacement
Lift the wiper arm until it stays in the
raised position, press button to
disengage the wiper blade and
remove.
Attach the wiper blade slightly angled
to the wip

Page 222 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual 220Vehicle care
Low beam (1) outer bulb.
High beam ( 2) inner bulb.
Low beam (1)
1. Rotate the cap anticlockwise and remove it.
2. Disengage spring clip fromretainer by pulling. Withdraw the
bulb hold

Page 223 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual Vehicle care221
2. Disengage spring clip fromretainer by moving it forward and
to the side. Swivel spring clip
downwards.
3. Withdraw the bulb holder from the
reflector.4. Detach the bulb from the bul

Page 224 of 291

VAUXHALL ASTRA J 2016.75  Owners Manual 222Vehicle care
2. Disengage the bulb socket fromthe plug connector by pressing
the retaining lug.
3. Remove and replace the bulb socket with bulb and attach the
plug connector.
4. Insert the bulb soc
Page:   1-8 9-16 next >