2016.75 VAUXHALL ASTRA J Voice

116Speech recognitionCommands available during voice
output of the voice tags:
● " Call": the telephone number of
the voice tag last read aloud is
selected.
● " Delete ": the entry of the voice
tag last read aloud is deleted.
Saving a mobile phone to or deleting
it from the device list
With the command " Pair" a mobile
phone can be saved to or deleted from the device list of the Phone
portal 3 118.
Commands available: ● " Add"
● " Delete "
● " Help "
● " Cancel "Example of a dialogue
User: " Pair"
Voice output: " Do you want to add or
delete a device? "
User: " Add"
Voice output: " Using the pair function
in the external device, enter <1234>
to pair. "Voice output: " Do you want to pair the
device? "
User: " Yes"
Voice output: " The device is
connected as the number
"
Selecting a mobile phone from the
device list
Using the " Select device " command,
a mobile phone can be selected in the
device list for setting up a Bluetooth
connection.Example of a dialogue
User: " Select device "
Voice output: " Please, say a device
number to select "
User:
Voice output: " Do you want to select
the device number ber>? "
User: " Yes"
Voice output: " Do you want to pair the
device? "
User: " Yes"Voice output: " One moment. The
system searches for the selected
device "
Voice output: " Device number
is selected "
Voice feedback
Each voice input is answered or
commented on by the Infotainment
system by way of a voice output that
is adapted to the situation.
To switch the voice output on or off,
enter " Voice feedback " or press w.

118Phoneinterference is caused by the
mobile phone or if dangerous
situations can occur.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about the specification on the Internet at
http://www.bluetooth.com
Operating the speech recognition
Do not use the speech recognition in
emergencies, because in stress
situations your voice can change so
much that it can no longer be
recognised sufficiently to set up the
desired connection quickly enough.
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of, e.g., a
telephone with other devices.
Information such as a telephone
book, call lists, the network operator's
name and field strength can be
transferred. The functionality can be
restricted depending on the
telephone type.
To be able to set up a Bluetooth
connection with the Phone portal, the
Bluetooth function of the mobile
phone must be activated and the
mobile phone must be set to "visible". For further information, please refer tothe operating instructions for the
mobile phone.
Bluetooth menu
Press CONFIG .
Select Phone settings and then
Bluetooth .
Activating Bluetooth
If the Bluetooth function of the Phone portal is deactivated: set Activation to
On and confirm the subsequent
message.Device list
When a mobile phone is connected to the Phone portal via Bluetooth for the first time, the mobile phone is stored
in the device list.
A maximum of 5 mobile phones can
be stored in the device list.

126PhoneIncoming callWhen there is an incoming call a
menu is displayed to accept or
decline the telephone call.
Select required option.
Functions during a telephone call If you currently have a telephone call,
press the multifunction knob to open
a submenu.
Various options are available
depending on the situation and range of functions of the mobile phone:
● Hang up : disconnect the
telephone connection.
● Call number : enter a telephone
number to make a second
telephone call or perform DTMF
(touch-tone dialling), e.g. for
voice mail or telephone banking.
● Detach call : detach the
connection to a conference
participant in a telephone
conference.
● Merge calls : merge two calls
when there are several active
calls.● Switch calls : switch between
calls, if there are several calls.
● Mute call : mute a call.
Mobile phones and CB radio
equipment
Installation instructions and
operating guidelines
The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be observed when installing and
operating a mobile telephone. Failure to do so could invalidate the vehicle
type approval (EU directive 95/54/
EC).Recommendations for fault-free
operation:
● The exterior antenna needs to be
professionally installed to obtain the maximum range possible.
● Maximum transmission power: 10 watts.
● The mobile phone needs to be installed in a suitable spot.
Consider relevant note in the
Owner's manual, section Airbag
system .
Seek advice on predetermined
installation points for the external
antenna or equipment holder and
ways of using devices with a
transmission power exceeding
10 watts.
Use of a handsfree attachment
without external antenna with mobile
telephone standards
GSM 900/1800/1900 and UMTS is
only permitted if the maximum
transmission power of the mobile telephone is 2 watts for GSM 900 or
1 watt for the other types.

129control elements......................117
dialling a number .....................123
emergency calls ......................122
functions during a call .............123
handsfree mode ......................118
important information ..............117
messaging functions ...............123
recharging the battery .............117
setting the volume ...................123
SIM Access Profile (SAP) .......118
telephone book ....................... 123
Phone control ............................. 113
Playing saved audio files ............110
R Radio Radio data system (RDS) .......101
activating ................................... 96
autostore lists ............................ 97
Digital audio broadcasting
(DAB) ...................................... 103
favourite lists ............................. 97
selecting the waveband ............96
station lists ................................ 98
station search ............................ 96
usage ........................................ 96
waveband menus ......................98
Radio data system (RDS) ..........101
RDS ............................................ 101
Recharging the phone battery ....117Regionalization ........................... 101
Retrieving stations ........................97
S SAP mode .................................. 118
Selecting the waveband ...............96
Setting the volume ........................88
SIM Access Profile (SAP) ...........118
Speech recognition .............112, 113
activating ................................. 113
phone control .......................... 113
usage ...................................... 113
volume for voice output ...........113
Speed compensated volume ........88
Starting CD playback ..................106
Station search............................... 96
Storing stations ............................. 97
Switching the Infotainment system on or off......................... 88
Switching the radio on ..................96
T
Theft-deterrent feature ................. 81
Tone settings ................................ 93
Traffic announcements .................95
U Updating station lists ....................98
Usage ..................... 88, 96, 106, 109
Using the AUX input ...................109
Using the CD player ...................106Using the Infotainment system .....88
Using the radio ............................. 96
Using the USB port .....................110
V Voice recognition ........................112
Volume for voice output ..............113
Volume settings ............................ 95
W
Waveband menus......................... 98