2015 YAMAHA TTR50 brake

TABLE OF CONTENTS
LOCATION OF IMPORTANT
LABELS..............................................1-1
SAFETY INFORMATION ...................2-1
DESCRIPTION ...................................3-1
Left view ..........................................3-1
Right view ........................................3-2
Controls and instruments ................3-3
INSTRUMENT AND CONTROL
FUNCTIONS .......................................4-1
Main switch .....................................4-1
Handlebar switches .........................4-1
Speed limiter ...................................4-2
Shift pedal .......................................4-3
Brake lever ......................................4-3
Brake pedal .....................................4-3
Fuel tank cap ...................................4-4
Fuel ..................................................4-4
Fuel tank breather hose...................4-6
Fuel cock .........................................4-7
Starter (choke) lever .......................4-8
Seat .................................................4-8
Sidestand ........................................4-9
Starting circuit cut-off system .........4-9 FOR YOUR SAFETY –
PRE-OPERATION CHECKS
............. 5-1
OPERATION AND IMPORTANT
RIDING POINTS ................................ 6-1
Starting and warming up a cold engine .......................................... 6-1
Starting a warm engine................... 6-2
Shifting............................................ 6-2
Engine break-in............................... 6-3
Parking ............................................ 6-4
PERIODIC MAINTENANCE AND
ADJUSTMENT .................................. 7-1
Periodic maintenance chart for the emission control system ............. 7-2
General maintenance and
lubrication chart .......................... 7-3
Checking the spark plug................. 7-6
Engine oil ........................................ 7-7
Cleaning the air filter element ......... 7-8
Cleaning the spark arrester .......... 7-10
Adjusting the carburetor ............... 7-11
Adjusting the engine idling speed......................................... 7-11
Checking the throttle grip free
play ............................................ 7-12
Valve clearance............................. 7-12
Tires .............................................. 7-13
Spoke wheels ............................... 7-14
Adjusting the clutch free play ....... 7-15 Adjusting the brake lever free
play ............................................ 7-15
Adjusting the brake pedal free play ............................................ 7-16
Checking the shift pedal ............... 7-17
Checking the front and rear brake
shoes ......................................... 7-17
Drive chain slack ........................... 7-18
Cleaning and lubricating the drive
chain .......................................... 7-19
Checking and lubricating the
cables ........................................ 7-20
Checking and lubricating the throttle grip and cable ............... 7-20
Checking and lubricating the brake lever ................................. 7-20
Checking and lubricating the
brake pedal ................................ 7-21
Checking and lubricating the sidestand ................................... 7-21
Lubricating the swingarm pivots ... 7-21
Checking the front fork ................. 7-22
Checking the steering ................... 7-22
Checking the wheel bearings ........ 7-23
Battery........................................... 7-23
Replacing the fuse ........................ 7-25
Supporting the motorcycle ........... 7-26
Front wheel ................................... 7-26
Rear wheel .................................... 7-28
Troubleshooting ............................ 7-30
Troubleshooting chart ................... 7-31
U2CJ82E0.book Page 1 Monday, June 23, 2014 2:58 PM

DESCRIPTION
3-2
3
EAU10421
Right view
4
65 3 2
1
1. Seat (page 4-8)
2. Fuel tank cap (page 4-4)
3. Spark plug cap (page 7-6)
4. Brake pedal (page 4-3)
5. Clutch adjusting screw (page 7-15)
6. Engine oil filler cap (page 7-7)U2CJ82E0.book Page 2 Monday, June 23, 2014 2:58 PM

DESCRIPTION
3-3
3
EAU10431
Controls and instruments
14
5
2
6
3
1. Engine stop switch (page 4-1)
2. Starter (choke) lever (page 4-8)
3. Main switch (page 4-1)
4. Brake lever (page 4-3)
5. Throttle grip (page 7-12)
6. Start switch (page 4-1)
U2CJ82E0.book Page 3 Monday, June 23, 2014 2:58 PM

INSTRUMENT AND CONTROL FUNCTIONS
4-3
4
EAU39852
Shift pedalThis motorcycle is equipped with a
constant-mesh 3-speed transmission.
The shift pedal is located on the left
side of the motorcycle. Neutral is at the
bottom position.
EAU12892
Brake leverThe brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
EAU12944
Brake ped alThe brake pedal is located on the right
side of the motorcycle. To apply the
rear brake, press down on the brake
pedal.
1. Shift pedal
2. Neutral position
1. Brake lever
1
1. Brake pedal
1
U2CJ82E0.book Page 3 Monday, June 23, 2014 2:58 PM

INSTRUMENT AND CONTROL FUNCTIONS
4-10
4
With the engine turned off:
1. Make sure that the engine stop switch is set to “”.
2. Turn the key to “ON”.
3. Shift the transmission into gear.
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
6. Shift the transmission into the neutral position.
7. Push the start switch.
Does the engine start?
The neutral switch may not be working correctly.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
YES
NO
The system is OK. The motorcycle can be ridden.
YES
NO
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
WARNING
U2CJ82E0.book Page 10 Monday, June 23, 2014 2:58 PM

FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-1
5
EAU15598
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
and maintenance procedures and schedules described in the Owner’s Manual.
WARNING
EWA11152
Failure to inspect or maintain the vehicle properly increases the possibility of an acci dent or equipment damag e.
Do not operate the vehicle if you fin d any pro blem. If a pro blem cannot be corrected b y the proce dures provi ded in
this manual, have the vehicle inspecte d b y a Yamaha dealer.Before using this vehicle, check the following points:
ITEM CHECKS PAGE
Fuel • Check fuel level in fuel tank.
• Refuel if necessary.
• Check fuel line for leakage.
• Check fuel tank breather hose for obstructions, cracks or damage, and check
hose connection. 4-4, 4-6
En gine oil • Check oil level in engine.
• If necessary, add recommended oil to specified level.
• Check vehicle for oil leakage. 7-7
Front brake • Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
7-15, 7-17
Rear brake • Check operation.
• Check pedal free play.
• Adjust if necessary. 7-16, 7-17
Throttle g rip • Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca-
ble and grip housing. 7-12, 7-20
U2CJ82E0.book Page 1 Monday, June 23, 2014 2:58 PM

FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
5
Control cables • Make sure that operation is smooth.
• Lubricate if necessary. 7-20
Drive chain • Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-18, 7-19
Wheels an d tires • Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary. 7-13, 7-14
Shift pe dal • Make sure that operation is smooth.
• Correct if necessary. 7-17
Brake pe dal • Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
7-21
Brake lever • Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary. 7-20
Si destan d • Make sure that operation is smooth.
• Lubricate pivot if necessary. 7-21
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
En gine stop switch • Check operation. 4-1
ITEM CHECKS PAGE
U2CJ82E0.book Page 2 Monday, June 23, 2014 2:58 PM

OPERATION AND IMPORTANT RIDING POINTS
6-3
63. Open the throttle gradually.
4. Once the motorcycle has reached
a speed high enough to change
gears, close the throttle.
5. Shift into second gear and release the shift pedal.
6. Open the throttle gradually.
7. Follow the same procedure when shifting to the next higher gear.
EAU16711
To decelerate
1. Close the throttle and apply both the front and the rear brakes to
slow the motorcycle.
2. Downshift through the gears and shift the transmission into the neu-
tral position when the motorcycle
is almost completely stopped.
EAU39921
Engine break-inThere is never a more important period
in the life of your engine than the first 5
hours of riding. It is also important to
accustom the rider to the motorcycle
during this time. Please read the fol-
lowing information carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
5 hours of operation. The various parts
in the engine wear and polish them-
selves to the correct operating clear-
ances. During this period, prolonged
full-throttle operation or any condition
that might result in engine overheating
must be avoided. However, momen-
tary full-throttle operation under load
(i.e., two to three seconds maximum)
does not harm the engine. Each full-
throttle acceleration should be fol-
lowed with a substantial rest period for
the engine. To allow the engine to cool
down from the temporary buildup of
heat, cruise at a lower engine speed.
After the first 5 hours of operation,
thoroughly check the motorcycle for
loose parts, oil leakage and any other
problems. Be sure to inspect and make adjustments thoroughly, especially ca-
ble and drive chain slack and loose
spokes. In addition, check all fittings
and fasteners for looseness, and tight-
en if necessary.
NOTICE
ECA10271
If any en
gine trou ble shoul d occur
d urin g the en gine break-in perio d,
imme diately have a Yamaha dealer
check the vehicle.
U2CJ82E0.book Page 3 Monday, June 23, 2014 2:58 PM