2015 VOLKSWAGEN JETTA HYBRID engine

Front view

Fig. 2 Vehicle front overview.
Key to fig. 2:
(1) Inside mirror with sensor on mirror base for:
– Rain sensor (if equipped)
– Low-light sensor (if equipped)
(2) Windshield wipers
(3) Engine hood release
(4) Headlights (on left and right)
(5) Fog lights (on left and right, if equipped)
(6) Threaded hole for the front towing eye (behind cover)
(7) Side marker lights (on left and right)
(8) Park Distance Control (PDC) sensors (if equipped)

– When the electric drive is activated, the needle moves from /&& to /.
(3) Displays ⇒  Displays. The hybrid power is displayed after the ignition is switched on Starting and stopping the engine.
(4) Reset button for the trip odometer display (trip).
– Push the /./

x Odometer displays
x Time
x Outside temperature
x Selector lever position ⇒  Shifting
x Driving data and menus for different settings ⇒  Volkswagen Information System
x Service reminder display ⇒  Service reminder display
x Hybrid drive information ⇒  Information on the hybrid drive system
x Engine code
Open doors, hood, or luggage compartment lid
The instrument cluster display indicates if any doors, the engine hood, or luggage compartment lid are open once the vehicle has been unlocked, and while the vehicle is in motion. There may also be an audible warning chime. Different models and equipment versions may have different displays.

Key to ⇒ fig. 11 See
A

Selector lever position
The selector lever position is shown both on the side of the selector lever and in the instrument cluster display. The respective gear may also be shown in the instrument cluster display in Drive (D) and
Sport Drive (S), as well as in Tiptronic® mode ⇒  Shifting.
Hybrid drive information
The following information for the hybrid drive is shown in the instrument cluster display:
x Vehicle readiness indicator READY ⇒ Starting and stopping the engine.
x Full electro-mode drive indicator E-MODE ⇒  Information on the hybrid drive system.
x Information and warnings ⇒  Information on the hybrid drive system.
x Electrical driving performance display (E-Powermeter) ⇒  Information on the hybrid drive system.
x Display showing the energy flow between the drive unit (electric motor or combustion engine), the
drive wheels, and the high-voltage battery ⇒  Information on the hybrid drive system.
Engine identification code
Press and hold the /./

Display Function
Travel time Driving time in hours (h) and minutes (min) corre-
sponding to trip memories 1 and 2 (toggle).
Consumption
--.- mpg
Current fuel consumption in miles per gallon
(l/100 km) while driving.
When units are set to miles, dashes appear instead of
a number when the engine is running and the vehicle
is standing still.
When units are set to kilometers, the display shows
liters consumed per hour when the engine is running
and the vehicle is standing still.
Consumption
--.- l/100 km
Av. consump-
tion
--.- mpg
Average fuel consumption in miles per gallon
(l/100 km) on trips per trip memories 1 and 2 (toggle)
is displayed once the vehicle has been driven about
330 feet (100 m). Until then, dashes appear instead
of a number. The value displayed is updated every
5 seconds.
Av. consump-
tion
--.- l/100 km
Range  -- mi Estimated distance in miles (km) that the vehicle can
go with the fuel left in the tank the way you are cur-
rently driving. Takes account of the current fuel con-
sumption, among other things. Range  -- km
Route -- mi Distance driven in miles (km) per trip memories 1 and
2 (toggle). Route -- km
Average speed
-- mph
Average speed on trips per trip memories 1 and 2
(toggle). Displayed once the vehicle has been driven
about 300 feet (100 m). Until then, dashes may ap-
pear instead of a number. The value displayed is
updated every 5 seconds.
Average speed
-- km/h
-- mph
Digital display of the current vehicle speed.
-- km/h

Display Function
Oil tempera-
ture ---°F
Current engine oil temperature.
Oil tempera-
ture ---°C
Speed warning
--- mph When the set speed (from 20–155 mph or 30–
250 km/h) is exceeded, an acoustic warning sounds
and a visual message may also appear in the instru-
ment cluster display. Speed warning
--- km/h

Switching between the displays
x Use the arrow up and down buttons (* and +) on the multi-function steering wheel.
Storing speed for the speed warning
x Select the Speed warning display.
x Press the /+ button to save the current speed and to activate the warning.
x If the speed is not right, press buttons * or + on the multi-function steering wheel to set a differ-ent speed within about 5 seconds. Then press the /+ button a second time or just wait a few seconds. The speed is saved and the warning is activated.
x To deactivate, toggle to Speed warning and press the /+ button. The set speed is deleted.
Manually erasing trip memory 1 or 2
x Select the trip memory to be erased.
x Press the /+ button for about 2 seconds.
Enabling and disabling displays
Use the Settings menu, submenu MFI data to enable displays you want to be available under the MFI menu in the instrument cluster display. The units in which data is displayed can also be changed
⇒  Settings menu.
Settings menu

WARNING
Vehicle health reports do not replace the information provided by the vehicle warning and indicator lights. Failure to heed warning lights and instrument cluster text messages can cause the vehicle to break down in traffic and result in a collision and serious personal injury.
x Never ignore warning lights or text WARNINGS.
x Always stop the vehicle as soon as it is safe to do so.
x Park the vehicle at a safe distance from moving traffic and where no part of the hot cata-lytic converter and exhaust system can come into contact with flammable materials under the vehicle, such as dry grass, brush, spilled fuel, etc.
x A broken down vehicle presents a high accident risk for itself and others. Switch on emergency flashers and set up a warning triangle to warn oncoming traffic.
x Before opening the engine hood, always switch off the engine and let the engine cool down.
x Always be very careful when working in the engine compartment, which is a potentially dangerous area in any motor vehicle and can cause serious personal injury.
NOTICE
Failure to heed warning lights or text WARNINGS can result in vehicle damage.
Volkswagen collects, processes, transmits, uses and shares information about you and your vehicle in accordance with the Volkswagen Car-Net Terms of Service and Privacy Policy. See the Volkswagen Car-Net Terms of Service and Privacy Policy at http://www.vw.com/carnet for more de-tails.
Volkswagen Car-Net services use a system based on a wireless communication network. If all technical and other conditions are met and Volkswagen Car-Net still does not work properly, please try using the service again later.
Features

Remote Vehicle Access:
Feature Description
Destinations
Only applica-
ble for vehi-
cles
equipped
with a facto-
ry-installed
navigation
system.
Points of Interest (POIs) or other destinations can be im-
ported remotely into the factory-installed navigation system
(if equipped) from a computer or the Volkswagen Car-Net
iPhone® or Android® app (text and data rates apply). These
destinations can be called up and used by the navigation
system.
Destination
Download
Only applica-
ble for vehi-
cles
equipped
with a facto-
ry-installed
navigation
system.
Press the • button in the 3-button module: The vehicle will
connect directly to the Volkswagen Car-Net Response
Center where a Volkswagen Car-Net Customer Specialist
will assist with destinations. The address of a dealer’s loca-
tion can also be sent by the Customer Specialist to your
factory-installed navigation system (if equipped).
Remote Sta-
tus Check
Current information about the vehicle can be viewed
through a computer or your Volkswagen Car-Net iPhone®
or Android® app (text and data rates apply). You can find
out if the doors, luggage compartment and engine hood
are open or closed, whether the car lights are on or off, the
level of fuel in the tank, when the vehicle needs to be ser-
viced next and more.


Diagnostics & Maintenance:
Feature Description