7. Remove the dipstick again and read the oil level on the dipstick ⇒ fig. 167 as described below:
(A): Do not start the engine ⇒ . Contact an authorized Volkswagen dealer or an authorized Volkswagen Service Facility for assistance.
(B): Do not add any oil ⇒ . Continue with step 15.
(C): Oil may be added, depending on the oil level. Continue with step 8 or step 15.
(D): You must add oil (about 1 quart / 1.0 liter). Continue with step 8.
8. After reading the oil level, reinsert the dipstick back into the guide tube and push it all the way in.
9. Remove the cap on the engine oil filler opening ⇒ fig. 168.
10. Only add engine oil that Volkswagen has approved for that engine. Add the oil gradually in small quantities (no more than 1 pint / 0.5 liter).
11. To help prevent overfilling, you must wait about 1 minute each time you add oil so that the oil can flow into the oil pan up to the marking on the dipstick.
12. Read the oil level on the dipstick again before adding another small amount, if necessary. Never
add too much oil ⇒ .
13. After adding oil, the level must at least be in the center of the ⇒ fig. 167 (C) range and can enter
range (B), but should never enter range (A) ⇒ .
14. After adding oil, securely install the cap on the engine oil filler opening. Otherwise, oil could leak out while the engine is running.
15. Insert the oil dipstick back in the guide tube and push it all the way in.
16. Close the hood ⇒
Engine oil level ranges
fig. 167 Required action according to the respective engine oil
level:
Range (A) Do not start the engine ⇒ . Contact an authorized
Volkswagen dealer or an authorized Volkswagen Service
Facility for assistance.
Range (B) Do not refill oil ⇒ .
Range (C) You may add oil, as long as the oil level does not go
above the (B) range.
Range (D)
You must add oil (about 1 quart / 1.0 liter). After adding
oil, make sure that the oil level is about in the middle of
the (C) range.