2015 TOYOTA YARIS HYBRID lock

942. Instrument cluster
YARIS_HV_EE_OM52F30E
*1: These lights turn on when the power switch is turned to the “ON” position
(vehicles without a smart entry & star t system) or ON mode (vehicles with
a smart entry & start system) to indicate that a system check is being per-
formed. They will turn off after the hybrid system on, or after a few sec-
onds. There may be a malfunction in a system if a light does not come on,
or if the lights do not turn off. Have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional.
*2: If equipped
*3: The light turns on to indicate a malfunction.
*4: The light flashes in yellow to indicate a malfunction. The light flashes
quickly in green to indicate that the steering lock has not been released.
*5: The light illuminate on the center panel.
*6: The light flashes to indicate a malfunction.
*7: The lights turn on with LDA indicator to indicate a malfunction.
Open door warning light
( →P. 399)
*2
Tire pressure warning
light ( →P. 400)
Low fuel level warning
light ( →P. 399)
*1
Hybrid system overheat
warning light ( →P. 400)
Driver’s and front
passenger’s seat belt
reminder light ( →P. 399)
*1
P position request
warning light ( →P. 400)
*5Rear passengers’ seat
belt reminder lights
( →P. 400)
*3
Go to service warning
light ( →P. 401)

97
2
2. Instrument cluster
Instrument cluster
YARIS_HV_EE_OM52F30E
Gauges and meters
Hybrid System Indicator
Displays hybrid system power output and regenerative level
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Display change button
→P. 100
Multi-information display
→P. 100
Clock adjusting buttons
→P. 102
1
2
3
4
5
6

1002. Instrument cluster
YARIS_HV_EE_OM52F30E
Multi-information display
Clock (→P. 102)
Outside temperature display
( →P. 102)
Shift position indicator
( →P. 191)
Drive information ( →P. 100)
.
Items displayed can be switched
by pressing the display change
button.
■Odometer
Displays the total distance the vehicle has been driven.
The Multi-information display presents the driver with a variety
of driving-related data including the clock.
Display contents
1
2
3
4
Changing the display
Drive information

1012. Instrument cluster
2
Instrument cluster
YARIS_HV_EE_OM52F30E
■Trip meter
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
Press and hold the button for longer than 1 second to reset. Pressing and
holding the button while the trip meter is displayed will reset the trip meter
to “0”.
■Instantaneous fuel consumption
Displays the instantaneous of fuel consumption.
• The function can be reset by pressing the button for longer than 1 sec-
ond when the instantaneous fuel consumption is displayed.
• Use the displayed instantaneous fuel consumption as a reference.
■Average fuel consumption
Displays the average rate of fuel consumption.
• The function can be reset by pressing the button for longer than 1 sec-
ond when the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a reference.
■Driving range
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the power switch to the “LOCK” position (vehicles
without a smart entry & start system) or off (vehicles with a smart entry &
start system). If the vehicle is refueled without turning the power switch to
the “LOCK” position or off, the display may not be updated.
■Average vehicle speed
Displays the average vehicle speed since the hybrid system was
last started or the function was reset.
The function can be reset by pressing the button for longer than 1 second
when the average vehicle speed is displayed.

1022. Instrument cluster
YARIS_HV_EE_OM52F30E
EV indicator can be activated or deactivated by pressing the display
change button when the EV indicator customization display is dis-
played.
To change the EV indicator customization display, display the odometer
and press and hold the display change button until the display changes.
The clock can be adjusted by pressing the buttons.
Adjust the hours
Adjust the minutes
The temperature display shows temperatures within the range of
-40°C (-40°F) and 50°C (122°F).
■Display
In the following situations, the correct outside temperature may not
be displayed, or the display may take longer than normal to change:
● When the vehicle is stopped, or moving at low speeds (less than
25 km/h [16 mph])
● When the outside temperature has changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
■When “ − −” or “E” is displayed
The system may be malfunctioning. Take your vehicle to any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional.
EV indicator customization
Clock
1
2
Outside temperature display

1032. Instrument cluster
2
Instrument cluster
YARIS_HV_EE_OM52F30E
■When disconnecting and reconnecting battery terminals
The following information data will be reset.
● Average fuel consumption
● Driving range
● Average vehicle speed
● Clock data
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal display, and there is no problem continuing to
use the display.
■ Changing the pre-crash warning timing
→ P. 216
WARNING
■ Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■ The Multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the display monitor may
respond slowly, and display changes may be delayed.

109
3
Operation of
each component
YARIS_HV_EE_OM52F30E
3-1. Key information
Keys ................................... 110
3-2. Opening, closing
and locking the doors
Side doors.......................... 122
Back door........................... 128
Smart entry &
start system ..................... 134
3-3. Adjusting the seats
Front seats ......................... 148
Rear seats ......................... 150
Head restraints .................. 153
3-4. Adjusting the steering
wheel and mirrors
Steering wheel ................... 155
Inside rear view mirror ....... 157
Outside rear view mirrors... 159
3-5. Opening and closing
the windows
Power windows .................. 162

1113-1. Key information
3
Operation of each component
YARIS_HV_EE_OM52F30E
XVehicles with a smart entry & start system
Electronic keys
• Operating the smart entry &
start system ( →P. 122, 128)
• Operating the wireless remote
control function ( →P. 123)
Mechanical keys
Key number plate
XVehicles without a smart entry & start system
Locks all the doors (→P. 123)
Check that the door is securely
locked.
Unlocks all the doors (→P. 123)
XVehicles with a smart entry & start system
Locks all the doors (→P. 123)
Check that the door is securely
locked.
Unlocks all the doors ( →P. 123)
1
2
3
Wireless remote control (if equipped)
1
2
1
2