2015 TOYOTA YARIS HATCHBACK lock

922. Instrument cluster
YARIS_F_WE_52G04E
Multi-information display
Clock (P. 9 5 )
Outside temperature display ( P. 9 6 )
Shift position and gear step position indicator ( P. 193)
Drive information ( P. 9 3 )
Fuel gauge
The multi-information display presents the driver with a variety
of driving-related data including the clock.
Display contents
Ty pe ATy pe B
Ty pe C
1
2
3
4
5

932. Instrument cluster
2
Instrument cluster
YARIS_F_WE_52G04E
.
Items displayed can be switched
by pressing the display change
button.
■Odometer
Displays the total distance the vehicle has been driven.
■Trip meter
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
Press and hold the button for longer than 1 second to reset. Pressing and
holding the button while the trip meter is displayed will reset the trip meter
to “0”.
■Driving range
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch to the “LOCK” position (vehicles
without a smart entry & start system) or off (vehicles with a smart entry &
start system). If the vehicle is refueled without turning the engine switch to
the “LOCK” position or off, the display may not be updated.
Changing the display
Drive information

942. Instrument cluster
YARIS_F_WE_52G04E
■Average fuel consumption
Displays the average rate of fuel consumption.
• The function can be reset by pressing the button for longer than 1 sec-
ond when the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a reference.
■Instantaneous fuel consumption
Displays the instantaneous of fuel consumption.
Use the displayed instantaneous fuel consumption as a reference.
■Average vehicle speed
Displays the average vehicle speed since the engine was last
started.
■Stop & Start system operation time (if equipped)
Displays the amount of time the engine was stopped due to opera-
tion of the Stop & Start system during the current trip.
Vehicles without a smart entry & start system:
From the engine switch in the “ON” position to the engine switch in
the “LOCK” position.
Vehicles with a smart entry & start system:
From the engine switch in IGNITION ON mode to the engine switch
off.
■Stop & Start system total operation time (if equipped)
Displays the total amount of time that the engine has been stopped
due to operation of the Stop & Start system since the system was
last reset.
Press and hold the button to reset.

952. Instrument cluster
2
Instrument cluster
YARIS_F_WE_52G04E
Eco Driving Indicator Light can be activated or deactivated by press-
ing the display change button when the Eco Driving Indicator Light
customization display is displayed.
To change the Eco Driving Indicator Light customization display, display the
odometer and press and hold the display change button until the display
changes.
After customization, press the display change button for more than 2 sec-
onds to return to the odometer.
The clock can be adjusted by pressing the buttons.
Adjust the hours
Adjust the minutes
Eco Driving Indicator Light customization (if equipped)
Clock
1
2

962. Instrument cluster
YARIS_F_WE_52G04E
The temperature display shows temperatures within the range of
-40°C (-40°F) and 50°C (122°F).
■Display
In the following situations, the correct outside temperature may not
be displayed, or the display may take longer than normal to change:
● When the vehicle is stopped, or moving at low speeds (less than
25 km/h [16 mph])
● When the outside temperature has changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
■When “ ” or “E” is displayed
The system may be malfunctioning. Take your vehicle to any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional.
■ When disconnecting and reconnecting battery terminals
The following information data will be reset:
● Driving range
● Average fuel consumption
● Stop & Start system total operation time (if equipped)
● Average vehicle speed
● Clock data
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal display, and there is no problem continuing to
use the display.
■ Changing the pre-crash warning timing
 P. 228
Outside temperature display

103
3
Operation of
each component
YARIS_F_WE_52G04E
3-1. Key information
Keys ................................... 104
3-2. Opening, closing
and locking the doors
Side doors.......................... 116
Back door........................... 123
Smart entry &
start system ..................... 129
3-3. Adjusting the seats
Front seats ......................... 140
Rear seats ......................... 143
Head restraints .................. 146
3-4. Adjusting the steering
wheel and mirrors
Steering wheel ................... 148
Inside rear view mirror ....... 150
Outside rear view mirrors... 153
3-5. Opening and closing
the windows
Power windows .................. 156

1053-1. Key information
3
Operation of each component
YARIS_F_WE_52G04E
Vehicles with a smart entry & start system
Electronic keys
• Operating the smart entry &
start system ( P. 129)
• Operating the wireless remote
control function ( P. 117)
Mechanical keys
Key number plate
Vehicles without a smart entry & start system
Locks all the doors (P. 117)
Unlocks all the doors (P. 1 1 7 )
Vehicles with a smart entry & start system
Locks all the doors (P. 117)
Unlocks all the doors ( P. 1 1 7 )
1
2
3
Wireless remote control
1
2
1
2

1163-2. Opening, closing and locking the doors
YARIS_F_WE_52G04E
Side doors
The vehicle can be locked and unlocked using the entry function,
wireless remote control, key or door lock switches.
◆Entry function (vehicles with a smart entry & start system)
Carry the electronic key to enable this function.
Grip the handle to unlock the
doors.
Make sure to touch the sensor
on the back of the handle.
The doors cannot be unlocked
for 3 seconds after the doors are
locked.
Touch the lock sensor (the
indentation on the side of the
door handle) to lock the
doors.
Check that the door is securely
locked.
Unlocking and locking the doors from the outside
1
2