2015 TOYOTA TUNDRA navigation system

122
1. VOICE COMMAND SYSTEM OPERATION
1. VOICE COMMAND SYSTEM
Talk switch
Press the talk switch to start the voice
command system.
 T
o cancel voice recognition, press and
hold the talk switch. 
It
is unnecessary to speak directly into the
microphone when giving a command.
The voice command system enables
the navigation, audio and hands-free
systems to be operated using voice
commands.
Refer to the command list for samples
of voice commands. ( P.128)
USING THE VOICE
COMMAND SYSTEM
STEERING SWITCH
MICROPHONE
INFORMATION
●The voice command system can be
operated while guidance is being spo-
ken. (It is not necessary to wait for the
confirmation beep before speaking a
command.)
● Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
● In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise, such as wind noise.

128
1. VOICE COMMAND SYSTEM OPERATION
3. COMMAND LIST
Frequently used commands are listed in the following tables.
 For devi
ces that are not installed in the vehicle, the related commands will not be dis -
played in the screen. Also, according to conditions, other commands may not be dis -
played in the screen.
 The fu
nctions available may vary according to the system installed.
Basic
 Entune
App Suite application*1
When the voice recognition language is set to English.
Navigation*1
Recognizable voice commands and their actions are shown below.
 Voice recognition language can be changed. ( P. 5 5)
CommandAction
“Help”Prompts voice guidance to offer examples of commands
or operation methods
“Go Back”Returns to the previous screen
“Number one/two/three/four/five”Selects the number on the list screen
“Next Page”Displays the next page
“Previous Page”Displays the previous page
“Go to ”Displays the command list of the selected tab
CommandAction
“Launch ”Activates the Entune App Suite application
CommandAction
“Find Nearby ”Displays a list of near the current posi-
tion
“Enter an Address”Enables setting a destina tion by saying the address
“Go Home”Displays the route to home
“Cancel Route”Stops the route guidance
*
1: Entune Premium Audio only
*2: For example; “Gas stations”, “Restaurants”, etc.

162
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1Display the message inbox screen.
(P.159)
2Select the desired message from the
list.
3Select “Quick Message” .
4Select the desired message.
5Select “Send” .
While the message is being sent, a send -
ing message screen is displayed.
 T
o cancel sending the message, select
“Cancel” .
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Message” .
2Select corresponding to the de -
sired message to edit.
3Select “OK” when editing is complet -
ed.
REPLYING TO A MESSAGE
(QUICK REPLY)
15 messages have already been
stored.This operation cannot be performed
while driving.
INFORMATION
● To reset the edited quick reply
messages, select “Default”.
 Entune Premium Audio
● “Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”) :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen. 
If there are waypoints set, [ETA] to the
next waypoint will be shown. 
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.

182
1. QUICK REFERENCE ................... 184
MAP SCREEN ..................................... 184
NAVIGATION OPTIONS SCREEN...... 186
2. MAP SCREEN OPERATION ....... 187
CURRENT POSITION DISPLAY ......... 187
MAP SCALE ........................................ 187
ORIENTATION OF THE MAP ............. 188
SWITCHING THE MAP MODE............ 189
SCREEN SCROLL OPERATION ........ 191
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 192
3. MAP SCREEN INFORMATION ... 193
DISPLAYING MAP INFORMATION .... 193
DISPLAYING INFORMATION 
ABOUT THE ICON WHERE 
THE CURSOR IS SET ...................... 195
STANDARD MAP ICONS .................... 196
4. TRAFFIC INFORMATION ............ 197
DISPLAYING TRAFFIC 
INFORMATION ON THE MAP .......... 199
1. DESTINATION SEARCH 
SCREEN .................................... 200
2. SEARCH OPERATION.. .............. 202
SELECTING SEARCH AREA .............. 203
SETTING HOME AS DESTINATION ... 203
SETTING PRESET DESTINATIONS 
AS DESTINATION ............................. 203
SEARCHING BY ADDRESS ................ 204
SEARCHING BY POINT OF 
INTEREST ......................................... 205
SEARCHING FROM PREVIOUS 
DESTINATIONS ................................ 209
SEARCHING BY ADDRESS BOOK .... 209
SEARCHING BY EMERGENCY .......... 210
SEARCHING BY INTERSECTION 
AND FREEWAY ................................ 210
SEARCHING BY MAP ......................... 212
SEARCHING BY COORDINATES ....... 212
3. STARTING ROUTE 
GUIDANCE ....... ......................... 213
STARTING ROUTE GUIDANCE.......... 213
PAUSING GUIDANCE ......................... 216
1BASIC OPERATION2DESTINATION SEARCH
8
183
8
183
NAVIGATION SYSTEM
*: Entune Premium Audio only
*

1
2
3
4
5
6
7
8
9
1. ROUTE GUIDANCE SCREEN ..... 217
SCREEN FOR ROUTE GUIDANCE ... 217
ROUTE OVERVIEW............................ 218
DURING FREEWAY DRIVING............ 219
WHEN APPROACHING 
INTERSECTION ............................... 220
TURN LIST SCREEN .......................... 221
TURN-BY-TURN ARROW SCREEN ... 221
2. TYPICAL VOICE GUIDANCE 
PROMPTS.................................. 222
3. EDITING ROUTE ......................... 223
ADDING DESTINATIONS ................... 224
REORDERING DESTINATIONS ......... 224
DELETING DESTINATIONS ............... 224
SETTING ROUTE PREFERENCES ... 224
SELECTING ROUTE TYPE ................ 225
DETOUR SETTING ............................. 225
STARTING FROM ADJACENT  ROAD ................................................ 226
1. MEMORY POINTS SETTINGS .... 227
SETTING UP HOME ........................... 228
SETTING UP PRESET DESTINATIONS................................ 229
SETTING UP ADDRESS BOOK ......... 231
SETTING UP AREAS TO AVOID ........ 233
DELETING PREVIOUS 
DESTINATIONS................................ 235
1. DETAILED NAVIGATION  SETTINGS ................................. 236
SCREENS FOR NAVIGATION 
SETTINGS ........................................ 236
2. TRAFFIC SETTINGS................... 240
SCREEN FOR TRAFFIC 
SETTINGS ........................................ 240
AUTO AVOID TRAFFIC....................... 241
MY TRAFFIC ROUTES ....................... 242
1. GPS (GLOBAL POSITIONING 
SYSTEM) .................... ............... 246
LIMITATIONS OF 
THE NAVIGATION SYSTEM ............ 246
2. MAP DATABASE VERSION 
AND COVERED AREA ............. 248
MAP INFORMATION ........................... 248
ABOUT THE MAP DATA ..................... 249
3ROUTE GUIDANCE
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION 
SYSTEM

184
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
188
Options buttonSelect to display the “Navigation Options” screen.186
“GPS” mark 
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.246
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD, HD
mark is displayed on the right.
197
Scale indicatorThis figure indicates the map scale.187

185
1. BASIC OPERATION
NAVIGATION SYSTEM
8
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.
187
Footprint map
buttonSelect to display the footprint map screen.188
Current position
button/voice
guidance buttonSelect to display the current position address.Select to repeat voice guidance.187
Destination but-
tonSelect to display the “Destination” screen.200
Speed limit icon
Indicates the speed limit on the current road.
The display of the speed limit icon can be set to
on/off.
193
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the
route.
217
Route informa-
tion buttonSelect to change the display between the current
street name and the distance with the estimated
travel/arrival time.
218
No.NameFunctionPage

187
1. BASIC OPERATION
NAVIGATION SYSTEM
8
2. MAP SCREEN OPERATION
1Press the “APPS” button.
2Select “Navigation” .
3Check that the current position map is
displayed.
1Select or to change the
scale of the map screen.
 The scale indicator bar appears at the bot -
tom of the screen.
 Sel
ect and hold or to con-
tinue changing the scale of the map
screen.
 The sc
ale of the map screen can also be
changed by selecting the scale bar
directly. This function is not available while
driving.
CURRENT POSITION
DISPLAY
To correct the current position manu-
ally:
P. 2 3 8
INFORMATION
● While driving, the current position mark
is fixed on the screen and the map
moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
MAP SCALE
INFORMATION
●The map scale is displayed above the
zoom in button at the bottom left of the
screen.
● In areas where the footprint map is avail-
able the map scale changes from
to when at the minimum range.