Page 457 of 590
457
4-3. Do-it-yourself maintenance
4
Maintenance and care
■
Front fog lights (if equipped)
Unplug the connector while pull-
ing the lock release.
Turn the bulb counterclockwise.
Page 458 of 590
458 4-3. Do-it-yourself maintenance
■Front side marker lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
Page 459 of 590
459
4-3. Do-it-yourself maintenance
4
Maintenance and care
■
Front turn signal lights/parki ng lights/daytime running lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
Page 460 of 590
460 4-3. Do-it-yourself maintenance
■Stop/tail lights, rear side marker lights (bulb type only), back-
up lights and rear turn signal lights
Remove the bolts and rear com-
bination assembly.
Unplug the connector while
depressing the lock release.
Turn the bulb bases counter-
clockwise.
Rear turn signal light
Stop/tail and rear side marker
lights (bulb type only)
Back-up light
Remove the light bulb. Rear turn signal light
Stop/tail and rear side marker
lights (bulb type only)
Back-up light
Page 462 of 590
462 4-3. Do-it-yourself maintenance
■License plate lights
Remove the screw and light unit.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
Page 487 of 590
5
When trouble arises
487
5-2. Steps to take in an emergency
Taking out the jack and tool bag
Access Cab models Vehicles with rear seats:
Pull up the lever.
Raise the bottom cushion up.
Turn the knob counterclockwise.
Double Cab models
Tool bag
Jack
Page 489 of 590
5
When trouble arises
489
5-2. Steps to take in an emergency
Double Cab models
Swing the bottom cushion up by
pulling the lock release strap.
Turn the knob counterclock-
wise.
Open the lid.
Unhook the strap and remove
the tool bag.
Loosen and remove the jack. Loosen
Tighten
Page 490 of 590
490 5-2. Steps to take in an emergency
Assemble the jack handle (in the tool bag)Assemble the jack handle exten-
sion as shown.
Taking out the spare tireInsert the end of the jack handle
extension into the lowering
screw and turn it counterclock-
wise.
After the tire is lowered com-
pletely to the ground, remove the
holding bracket.