2015 TOYOTA SIENNA reset

227
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
PHONE
7
■BY SELECTING “Release Tones”
1Select “Release Tones” .
1Select “Transmit Volume”.
2Select the desired level for the transmit
volume.
3Select “OK”.
“Release Tones” appear when a con-
tinuous tone signal(s) containing a (w)
is registered in the contact list.
This operation can be performed while
driving.
INFORMATION
● A continuous tone signal is a character
string that consists of numbers and the
characters p or w. (e.g.
056133w0123p#1 )
● When the “p” pause tone is used, the
tone data up until the next pause tone
will be automatically sent after 2 sec-
onds have elapsed. When the “w” pause
tone is used, the tone data up until the
next pause tone will be automatically
sent after a user operation is performed.
● Release tones can be used when auto-
mated operation of a phone based ser-
vice such as an answering machine or
bank phone service is desired. A phone
number with continuous tone signals
can be registered in the contact list.
● Tone data after a “w” pause tone can be
operated on voice command during a
call.
TRANSMIT VOLUME SETTING
INFORMATION
●The sound quality of the voice heard
from the other party’s speaker may be
negatively impacted.
● To reset the transmit volume, select
“Default” .
● “Transmit Volume” is dimmed when
mute is on.

232
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
1Display the message inbox screen.
(P.229)
2Select the desired message from the
list.
3Select “Quick Message” .
4Select the desired message.
5Select “Send” .
While the message is being sent, a send-
ing message screen is displayed.
 To cancel sending the message, select
“Cancel” .
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Message” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is complet-
ed.
*: With navigation function
REPLYING TO A MESSAGE
(QUICK REPLY)
15 messages have already been
stored.This operation cannot be performed
while driving.
INFORMATION
● To reset the editquick reply messages,
select “Default” .
● “Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”)* :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.

235
2. SETUP
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
PHONE
7
1Display the “Phone/Message Settings”
screen. (P.234)
2Select “Sound Settings” .
3Select the desired item to be set.
“Sound Settings” SCREEN
The call and ringtone volume can be
adjusted. A ringtone can be selected.
No.Function
Select to set the desired ringtone.
Select “-” or “+” to adjust the ring-
tone volume.
Select “-” or “+” to adjust the mes-
sage readout volume.
Select to set the desired incoming
SMS/MMS tone.
Select “-” or “+” to adjust the in-
coming SMS/MMS tone volume.
Select to set the desired incoming e-
mail tone.
Select “-” or “+” to adjust the in-
coming e-mail tone volume.
Select “-” or “+” to adjust the de-
fault volume of the other party’s
voice.
Select to reset all setup items.
INFORMATION
● Depending on the type of phone, certain
functions may not be available.

237
2. SETUP
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
PHONE
7
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic Transfer” is set to off.
(P.236)
■FOR PBAP COMPATIBLE
Bluetooth
® PHONES
1Select “Update Contacts from
Phone” .
Contacts are transferred automatically.
2Check that a confirmation screen is
displayed when the operation is com-
plete.
This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
® phone.
 If another Bluetooth
® device is connected
when transferring contact data, depending
on the phone, the connected Bluetooth
®
device may need to be disconnected.
 Depending on the type of Bluetooth
®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
*Select to delete contacts
from the contact list.240
Select to reset all setup
items.
INFORMATION
● Depending on the type of phone, certain
functions may not be available.
● Contact data is managed independently
for every registered phone. When one
phone is connected, another phone’s
registered data cannot be read.
No.FunctionPageUPDATE CONTACTS FROM
PHONE
Operation methods differ between
PBAP compatible and PBAP incom-
patible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the contacts can-
not be transferred.

244
2. SETUP
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
1Display the “Phone/Message Settings”
screen. (P.234)
2Select “Messaging Settings” .
3Select the desired item to be set.
“Messaging Settings”
SCREEN
No.Function
Select to set automatic message
transfer on/off.
Select to set automatic message
readout on/off.
Select to set the SMS/MMS notifica-
tion popup on/off.
Select to set the e-mail notification
popup on/off.
Select to set adding the vehicle signa-
ture to outgoing messages on/off.
Select to set updating message read
status on phone on/off.
Select to change the incoming SMS/
MMS display.
“Full Screen”: When an SMS/MMS
message is received, the incoming
SMS/MMS display screen is dis-
played and can be operated on the
screen.
“Drop-down” : When an SMS/MMS
message is received, a message is
displayed on the upper side of the
screen.
Select to change the incoming e-mail
display.
“Full Screen” : When an e-mail is re-
ceived, the incoming e-mail display
screen is the displayed and can be
operated on the screen.
“Drop-down” : When an e-mail is re-
ceived, a message is displayed on the
upper side of the screen.
Select to set display of messaging ac-
count names on the inbox tab on/off.
When set to on, messaging account
names used on the cellular phone will
be displayed.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.
No.Function

245
2. SETUP
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
PHONE
7
1Display the phone top screen.
(P.219)
2Select .
3Select “Settings” .
1Display the “Phone/Message Settings”
screen. (P.234)
2Select “Phone Display Settings” .
3Select the desired item to be set.
DISPLAYING THE “Messaging
Settings” SCREEN IN A
DIFFERENT WAY“Phone Display Settings”
SCREEN
No.Function
Select to change the incoming call
display.
“Full Screen”: When a call is re-
ceived, the hands-free screen is dis-
played and can be operated on the
screen.
“Drop-down” : A message is dis-
played on the upper side of the
screen.
Select to set display of the contact/
history transfer completion message
on/off.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.

254
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
1. QUICK REFERENCE ................... 256
MAP SCREEN ..................................... 256
NAVIGATION OPTIONS SCREEN...... 258
2. MAP SCREEN OPERATION ....... 259
CURRENT POSITION DISPLAY ......... 259
MAP SCALE ........................................ 259
ORIENTATION OF THE MAP ............. 260
SWITCHING THE MAP MODE............ 261
SCREEN SCROLL OPERATION ........ 263
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 264
3. MAP SCREEN INFORMATION .......................... 265
DISPLAYING MAP INFORMATION .... 265
DISPLAYING INFORMATION
ABOUT THE ICON WHERE THE
CURSOR IS SET .............................. 267
STANDARD MAP ICONS .................... 268
4. TRAFFIC INFORMATION ............ 269
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 271
1. DESTINATION SEARCH SCREEN .................................... 272
2. SEARCH OPERATION.. .............. 274
SELECTING SEARCH AREA .............. 275
SETTING HOME AS
DESTINATION................................... 275
SETTING PRESET DESTINATIONS AS DESTINATION ............................. 275
SEARCHING BY ADDRESS ................ 276
SEARCHING BY POINT OF INTEREST ......................................... 277
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 280
SEARCHING BY ADDRESS BOOK .............................. 280
SEARCHING BY EMERGENCY .......... 281
SEARCHING BY INTERSECTION AND FREEWAY..... 281
SEARCHING BY MAP ......................... 283
SEARCHING BY COORDINATES ....... 283
3. STARTING ROUTE GUIDANCE ....... ......................... 284
STARTING ROUTE GUIDANCE.......... 284
PAUSING GUIDANCE ......................... 287
1BASIC OPERATION2DESTINATION SEARCH
8
NAVIGATION SYSTEM *

8
255
SIENNA_Navi+MM_01999-08003_(U)
14.06.02 18:35
1
2
3
4
5
6
7
8
9
1. ROUTE GUIDANCE SCREEN ..... 288
SCREEN FOR ROUTE GUIDANCE ... 288
ROUTE OVERVIEW............................ 289
DURING FREEWAY DRIVING............ 290
WHEN APPROACHING INTERSECTION ............................... 291
TURN LIST SCREEN .......................... 292
TURN-BY-TURN ARROW SCREEN ........................................... 292
2. TYPICAL VOICE GUIDANCE PROMPTS.................................. 293
3. EDITING ROUTE ......................... 294
ADDING DESTINATIONS ................... 295
REORDERING DESTINATIONS ......... 295
DELETING DESTINATIONS ............... 295
SETTING ROUTE PREFERENCES ... 296
SELECTING ROUTE TYPE ................ 296
DETOUR SETTING ............................. 297
STARTING FROM ADJACENT ROAD ................................................ 298
1. MEMORY POINTS SETTINGS ................................. 299
SETTING UP HOME ........................... 300
SETTING UP PRESET
DESTINATIONS................................ 301 SETTING UP ADDRESS BOOK.......... 303
SETTING UP AREAS TO AVOID ........ 305
DELETING PREVIOUS
DESTINATIONS ................................ 307
1. DETAILED NAVIGATION SETTINGS ................................. 308
SCREENS FOR NAVIGATION
SETTINGS ........................................ 308
2. TRAFFIC SETTINGS................... 312
SCREEN FOR TRAFFIC SETTINGS ........................................ 312
AUTO AVOID TRAFFIC....................... 313
MY TRAFFIC ROUTES ....................... 314
1. GPS (GLOBAL POSITIONING SYSTEM) .................... ............... 318
LIMITATIONS OF THE
NAVIGATION SYSTEM..................... 318
2. MAP DATABASE VERSION AND COVERED AREA ............. 320
MAP INFORMATION ........................... 320
ABOUT THE MAP DATA ..................... 321
3ROUTE GUIDANCE
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION
SYSTEM
NAVIGATION SYSTEM*
*: With navigation function