2015 TOYOTA RAV4 brake

[x] Cancel search: brake

Page 189 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual RAV4_OM_OM42A78U_(U)
1894-1. Before driving
4
Driving
●As  stopping  distance  is  increased  when  towing  a  trailer,  vehicle-to
vehicle  distance  should  be  increa sed.  For  each  10  mph  (1

Page 190 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual 190
RAV4_OM_OM42A78U_(U)
4-1. Before driving
●Due to the added load of the trailer, your vehicle’s engine may over-
heat  on  hot  days  (at  temperatures  over  85 F  [30C])  when  driving

Page 192 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual 192
RAV4_OM_OM42A78U_(U)
4-1. Before driving
■Break-in schedule
If  your  vehicle  is  new  or  equipped  with  any  new  power  train  components
(such  as  an  engine,  transmission,  differ entia

Page 193 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual RAV4_OM_OM42A78U_(U)
1934-1. Before driving
4
Driving
●After the trailer swaying has stopped:
• Stop in a safe place. Get all occupants out of the vehicle.
• Check the tires of the vehicle and t

Page 194 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual 194
RAV4_OM_OM42A78U_(U)
4-1. Before driving
CAUTION
●Do not apply the brakes suddenly as you may skid, resulting in jackknifing
and  loss  of  vehicle  control.  This  is  especially  true  on  wet

Page 195 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual RAV4_OM_OM42A78U_(U)
1954-1. Before driving
4
Driving
CAUTION
■When towing a trailer
Toyota recommends trailers with brakes that conform to any applicable fed-
eral and state/provincial regulations.

Page 197 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual 197
RAV4_OM_OM42A78U_(U)
4-2. Driving procedures
4
Driving
Engine (ignition) switch (vehicles without a 
smart key system)
Check that the parking brake is set.
Check that the shift lever is set in P.

Page 200 of 732

TOYOTA RAV4 2015 XA40 / 4.G Owners Manual 200
RAV4_OM_OM42A78U_(U)
4-2. Driving procedures
Engine (ignition) switch (vehicles with a 
smart key system)
Check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depres