2015 TOYOTA PRIUS V high beam

[x] Cancel search: high beam

Page 195 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual 194
PRIUS v_OM_OM47887U_(U)
4-3. Operating the lights and wipers
■Switching to low beam
Pull the lever to original posi-
tion.
The Automatic High Beam indi-
cator will turn off.
Push the lever away

Page 196 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual PRIUS v_OM_OM47887U_(U)
1954-3. Operating the lights and wipers
4
Driving
■The Automatic High Beam can be operated when
The power switch is in ON mode.
■ Camera sensor detection information
●Hig

Page 197 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual 196
PRIUS v_OM_OM47887U_(U)
4-3. Operating the lights and wipers
●In the situations below, the system may not be able to correctly detect the
surrounding brightness levels, and may flash or expose n

Page 198 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual PRIUS v_OM_OM47887U_(U)
1974-3. Operating the lights and wipers
4
Driving
NOTICE
■Notes when using the Au tomatic High Beam system
● Do not spill liquid onto the camera sensor.
● Do not apply wi

Page 411 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual 410
PRIUS v_OM_OM47887U_(U)
7-1. Maintenance and care
NOTICE
■Cleaning detergents
● Do not use the following types of detergent, as they may discolor the vehi-
cle interior or cause streaks or dam

Page 466 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual PRIUS v_OM_OM47887U_(U)
4657-3. Do-it-yourself maintenance
7
Maintenance and care
■Front
■RearLicense plate lights
Back-up light
Rear turn signal light
Bulb locations
Vehicles with halogen 
hea

Page 468 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual PRIUS v_OM_OM47887U_(U)
4677-3. Do-it-yourself maintenance
7
Maintenance and care
■Headlight high beams/daytime running lights (halogen head-
lights)
Turn the cover counterclock-
wise and remove it.

Page 469 of 621

TOYOTA PRIUS V 2015 ZVW40 / 1.G Owners Manual 468
PRIUS v_OM_OM47887U_(U)
7-3. Do-it-yourself maintenance
Replace the light bulb, and
set the connector.
Install the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn
Page:   < prev 1-8 9-16 17-24 next >