2015 TOYOTA PRIUS V brake

PRIUS v_OM_OM47887U_(U)
872. Instrument cluster
2
Instrument cluster
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
*1
(U.S.A.)
Brake system warning
light ( P. 488)*1
(U.S.A.)
ABS warning light
(P. 489)
*1
(Canada)
(Red)
Brake system warning
light ( P. 488)
*1
(Canada)
ABS warning light
(P. 489)
*1
(Yellow)
Brake system warning
light ( P. 488)*1Electric power steering
system warning light
(P. 489)
*1Charging system
warning light ( P. 488)*1, 2
(If equipped)
PCS warning light
(P. 489)
*1
(If equipped)
Low engine oil pressure
warning light ( P. 488)*1Slip indicator light
(P. 490)
*1
(If equipped)
Hybrid system warning
light ( P. 488)*1High coolant
temperature warning
light (P. 491)
*1
(U.S.A.)
Malfunction indicator
lamp ( P. 489)*1
(If equipped)
Parking lock system
warning light ( P. 490)
*1
(Canada)
Malfunction indicator
lamp ( P. 489)
(If equipped)
Parking lock system
warning message
(P. 490)
*1SRS warning light
(P. 489)*1
(If equipped)
LED headlight warning
light ( P. 490)

PRIUS v_OM_OM47887U_(U)
972. Instrument cluster
2
Instrument cluster
The items displayed on Hybrid System Indicator can be changed by
operating the DISP button. Fully stop the vehicle and set the parking
brake, and then press the P position switch.After pressing the DISP button
to display the “SET” screen on
the trip information display,
press and hold the DISP button
for 1 second or more.
The “SET” display and Hybrid Sys-
tem Indicator will flash.
Press the DISP button while the
display is flashing to select the
items to be displayed.
The display items will flash.Display all
Display Hybrid System Indi-
cator and EV indicator
Display Hybrid System Indi-
cator only
Display none
Display Eco Driving Indicator
Light only
Press and hold the DISP button for 1 second or more to complete
the setup.
If setup is not completed by pressing and holding the DISP button for 1
second or more, or if nothing is operated within approximately 10 seconds,
the screen will return and the settings will be lost.
Changing Hybrid System Indica tor settings (vehicles without
multi-information display)
1
2
1
2
3
4
5
3

98
PRIUS v_OM_OM47887U_(U)
2. Instrument cluster
■The meters and display illuminate when
The power switch is in ON mode.
■ Hybrid System Indicator
●By keeping the indicator within Eco area, more Eco-friendly driving can be
achieved.
● Charge area indicates regeneration
* status. Regenerated energy will be
used to charge the hybrid battery (traction battery).
*: When used in this manual, “regeneration” refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
■ Eco Driving Indicator Light (vehicl es without multi-information display)
● When all of the following conditions are satisfied and the Eco-friendly driv-
ing, the light will illuminate:
• Driving with the shift position in D
• Either normal mode or Eco drive mode is selected, and EV drive mode is
not in use ( P. 177, 243)
• The vehicle speed is approximately 80 mph (130 km/h) or below.
● Eco Driving Indicator Light can be set to activated or deactivated. ( P. 97)
Charge area
Shows that energy is being recovered
via the regenerative brake.
Eco area
Shows that the vehicle is being driven in
an Eco-friendly manner.
Hybrid Eco area
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Power area
Shows that an Eco-friendly driving
range is being exceeded (during full
power driving etc.)
1
2
3
4

138
PRIUS v_OM_OM47887U_(U)
3-3. Adjusting the seats
■Before flattening the seatbacksStop the vehicle in a safe place.
Apply the parking brake firmly and shift the shift position to P. ( P. 180)
Slide the rear seats as far back as possible. ( P. 141)
■Flattening the seatbacks
Move the front seat forward
and remove the head
restraint. ( P. 144)
Tilt the front seatback to the
same height as the rear seat
cushion.
To return the seats, reverse the procedure.
After returning the seats to their original position, make sure to replace
the head restraint.
Flattening the seatbacks
1
2
1
2
3

PRIUS v_OM_OM47887U_(U)
1393-3. Adjusting the seats
3
Operation of each component
WARNING
■When adjusting the seat position
● Take care when adjusting the seat position to ensure that other passen-
gers are not injured by the moving seat.
● Do not put your hands under the seat or near the moving parts to avoid
injury.
Fingers or hands may become jammed in the seat mechanism.
■ Seat adjustment
● To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
● Manual seats: After adjusting the seat, make sure that the seat is locked in
position.
● When returning the seats to their upright positions, be careful not to catch
the seat belts.
■ Flattening the seats
Observe the following precautions. Failure to do so may result in death or
serious injury.
● Do not flatten the seats while driving.
● In a flat place, apply the parking brake firmly and shift the shift position to
P.
● Do not flatten the seats if they are occupied.
● Be careful not to get feet or hands caught in the moving parts or joints of
the seats while flattening.
● Do not allow children to flatten the seats.
● Do not drive with passengers sitting on the flattened seatback or in the lug-
gage compartment.
● Do not drive with luggage or passengers on the flattened seats.
● Do not allow children to enter the luggage compartment.
● After flattening, gently rock the seats to ensure they are firmly in place.
● Make sure that the seat belts are not caught in the gaps between the
seats.

141
PRIUS v_OM_OM47887U_(U)
3-3. Adjusting the seats
3
Operation of each component
Rear seats
Seatback angle adjustment
lever
Seat position adjustment lever
Park the vehicle in a safe place.
Apply the parking brake firmly and shift the shift position to P. ( P. 180)
Adjust the position of the front seat and the angle of the seatback.
(
P. 137)
Depending on the position of the front seat, if the seatback is folded back-
ward, it may interfere with the operation of the rear seat.
Uncouple and stow the rear center seat belt. (P. 34)
This step is not necessary when operating the driver’s side seat only.
Lower the head restraint of the rear seat. (P. 144)
Vehicles with an armrest: Stow the armrest of the rear seat if it is
pulled out. ( P. 385)
Adjustment procedure
1
2
Before folding down the seatbacks
1
2
3
4
5

PRIUS v_OM_OM47887U_(U)
1433-3. Adjusting the seats
3
Operation of each component
WARNING
■When folding the seatbacks down
Observe the following precautions. Failure to do so may result in death or
serious injury.
● Do not fold the seatbacks down while driving.
● Stop the vehicle on level ground, apply the parking brake firmly and shift
the shift position to P.
● Do not allow anyone to sit on a folded seatback or in the luggage compart-
ment while driving.
● Do not allow children to enter the luggage compartment.
● Do not operate the rear seat if it is occupied.
● Be careful not to get feet or hands caught in the moving parts or joints of
the seats during operation.
● Do not allow children to operate the seat.
● After operation, rock the seat gently to ensure that it is firmly in place.
■ Reclining adjustment
● To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
● After adjusting the seat, make sure that the seat is locked in position.
■ After returning the seatback to the upright position
Observe the following precautions. Failure to do so may result in death or
serious injury.
● Make sure that the seatback is securely locked in position by lightly push-
ing it back and forth.
● Check that the seat belts are not twisted or caught in the seatback.
● Re-couple the rear center seat belt if it has been uncoupled. ( P. 33)
● If the seat belt has been stowed using the seat belt hanger, check that the
seat belt has been removed from the hanger. ( P. 142)

155
PRIUS v_OM_OM47887U_(U)
4Driving
4-1. Before drivingDriving the vehicle ............. 156
Cargo and luggage ........... 165
Vehicle load limits ............. 169
Trailer towing..................... 170
Dinghy towing ................... 171
4-2. Driving procedures Power (ignition) switch ...... 172
EV drive mode .................. 177
Hybrid transmission........... 179
Turn signal lever................ 185
Parking brake .................... 186
4-3. Operating the lights and wipers
Headlight switch ................ 187
Automatic High Beam ....... 192
Fog light switch ................. 198
Windshield wipers and washer ............................ 200
Rear window wiper and washer ............................ 203 4-4. Refueling
Opening the fuel tank cap .................................. 205
4-5. Using the driving support systems
Cruise control .................... 208
Dynamic radar cruise control ............................. 212
LDA (Lane Departure Alert) ............................... 225
Rear view monitor system ............................ 233
Driving mode select switch .............................. 243
Driving assist systems ...... 244
PCS (Pre-Collision System)........................... 251
4-6. Driving tips Hybrid vehicle driving tips .................................. 258
Winter driving tips ............. 261