Page 320 of 728
278
2-2. Instrument cluster
PRIUS PHV_OM_OM47A11U_(U)
■Resetting the data
Press and hold the “TRIP” button
while  the  screen  you  want  to
reset is being displayed.
The  bar  display,  percent  display,
driving  distance,  electricity  con-
sumption  and  fuel  consumption
will be reset.
Odometer/trip meter/distance to empty
■Switching the display
The  display  changes  as  follows
each  time  the  “TRIP”  button  is
pressed.  Also,  if  the  button  is
kept  pressed  down  while  the  trip
meter is being displayed, the trip
meter will be reset to 0. 
         
        
        
     
        
        Page 322 of 728
280
2-2. Instrument cluster
PRIUS PHV_OM_OM47A11U_(U)
Clock
The clock can be adjusted by pressing the buttons.
Adjusts the hours.
Adjusts the minutes.
Rounds to the nearest hour.*
*: e.g. 1:00 to 1:29  o 1:00
1:30 to 1:59  o 2:00
Setting up the displays
Press the “DISP” button  until  the
“SETTINGS” screen appears.
Calendar will be displayed.
While the vehicle is stopped, press and hold the “DISP” button
until the screen changes.
The  selected  item  will  change  each  time  the  “DISP”  button  is
pressed.
STEP 1 
STEP 2  
         
        
        
     
        
        Page 330 of 728

288
2-2. Instrument cluster
PRIUS PHV_OM_OM47A11U_(U)
■Driving in Eco drive mode
The  multi-information  display  will  automatically  switch  the  display  to  Hybrid
System Indicator, regardless of which display is currently being shown. 
( oP.   2 7 3 )
■To u c h   t r a c e r   d i s p l a y   ( i f   e q u i p p e d )
●The  touch  tracer  display  can  be  set  to  not  display  even  if  the  steering
switches are touched.
●Only  the  circular,  rubber-covered  switches  have  a  built-in  touch  sensor.
To u c h i n g   a n y   o f   t h e   o t h e r   s w i t c h e s   w i l l   n o t   d i s p l a y   t h e   t o u c h   t r a c e r   d i s -
play.
■Display settings can be changed when
The vehicle speed is less than approximately 5 mph (8 km/h).
■Engine speed
On  hybrid  vehicles,  engine  speed  is  precisely  controlled  in  order  to  help
improve  fuel  efficiency  and  reduce  exhaust  emissions  etc.  There  are  times
when the engine speed that is displayed may differ even when vehicle oper-
ation and driving conditions are the same.
■When the 12-volt battery is disconnected
The following data will be reset.
●Average fuel consumption
●Distance to empty
●Average vehicle speed
●EV driving ratio
●Clock
●Display settings
●Trip meter 
         
        
        
     
        
        Page 414 of 728

373
3-1. Using the air conditioning system and defogger
PRIUS PHV_OM_OM47A11U_(U)
3
Interior features
■If air flow from the vents decreases dramatically
The filter may be clogged. Contact your Toyota dealer.
■Operation of the air conditioning system in Eco drive mode
In the Eco drive mode, the air conditioning system is controlled as follows to
prioritize fuel efficiency:
●Engine  speed  and  compressor  operation  controlled  to  restrict  heating/
cooling capacity
●Fan speed restricted when automatic mode is selected
To   i m p r o v e   a i r   c o n d i t i o n i n g   p e r f o r m a n c e ,   p e r f o r m   t h e   f o l l o w i n g   o p e r a t i o n s :
●Adjust the fan speed
●Turn off Eco drive mode ( oP.   2 5 1 )
●Customize the air conditioning control of Eco drive mode. ( oP.   6 4 7 )
■When outside air temperature is below 32°F (0°C)
The  cooling  and  dehumidification  function  may  not  operate  even  when
 is pressed.
■Ve nt i l a t i on   a nd   a i r   c on di t i o ni n g   od o rs
●To   l e t   f r e s h   a i r   i n ,   s e t   t h e   a i r   c o n d i t i o n i n g   s y s t e m   t o   t h e   o u t s i d e   a i r   m o d e .
●During use, various odors from inside and outside the vehicle may enter
into and accumulate in the air conditioning system. This may then cause
odor to be emitted from the vents.
●To   r e d u c e   p o t e n t i a l   o d o r s   f r o m   o c c u r r i n g :
•It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.
•The start timing of the blower may be delayed for a short period of time
immediately  after  the  air  conditioning  system  is  started  in  automatic
mode.
■Customization
Settings  (e.g.  enable/disable  automatic  operation  of  the  air  conditioning
compressor when the “AUTO” switch ON) can be changed.
(Customizable features  oP.   6 4 7 ) 
         
        
        
     
        
        Page 431 of 728
390
3-3. Using the interior lights
PRIUS PHV_OM_OM47A11U_(U)
Rear interior light
The light will turn on/off in con-
junction  with  the  front  interior
lights
Turns the light on
ITI34P133a
■Illuminated entry system
The lights automatically turn on/off according to “POWER” switch mode, the
presence of the electronic key, whether the doors are locked/unlocked, and
whether the doors are opened/closed.
■To   p r e v e n t   1 2 - v o l t   b a t t e r y   d i s c h a r g e
If the interior lights remain on when the door is not fully closed and the inte-
rior light switch (door position on/off) is on, the lights will go off automatically
after 20 minutes.
■Customization
Setting (e.g. The time elapsed before lights turn off) can be changed. 
(Customizable features  oP.   6 5 1 )
NOTICE
■To   p r e v e n t   1 2 - v o l t   b a t t e r y   d i s c h a r g e
Do not leave the lights on longer than necessary when the hybrid system is
off.
Rear interior light 
         
        
        
     
        
        Page 500 of 728
460
4-3. Do-it-yourself maintenance
PRIUS PHV_OM_OM47A11U_(U)
Firmly  tighten  each  nut  two  or
three times in the order shown in
the illustration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
St ow  the  tir e  ja ck a nd  all  too l s.
STEP 4 
■After completing the tire change
The tire pressure warning system must be reset. ( oP.   4 8 2 )
■Jack point guide
STEP 5 
The jack point guides are located under
the rocker panel. They indicate the jack
point positions. 
         
        
        
     
        
        Page 639 of 728

600
5-2. Steps to take in an emergency
PRIUS PHV_OM_OM47A11U_(U)
Starting the hybrid system
Depress the brake pedal.
To u c h   t h e   To y o t a   e m b l e m   s i d e   o f
the  electronic  key  to  the
“POWER” switch.
If  any  of  the  doors  is  opened  or
closed  while  the  key  is  being
touched  to  the  switch,  an  alarm
will sound to indicate that the start
function  cannot  detect  the  elec-
tronic key.
Press  the  “POWER”  switch  within  10  seconds  of  the  buzzer
sounding, keeping the brake pedal depressed.
In  the  event  that  the hybrid  system  still  cannot be operated, contact
your Toyota dealer.
STEP 1 
STEP 2 
■Stopping the hybrid system
Set  the  parking  brake,  shift  the  shift  position  to  P  and  press  the  “POWER”
switch as you normally do when stopping the hybrid system.
■Replacing the key battery
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted. 
( oP.   4 9 7 )
■Changing “POWER” switch modes
Within  10  seconds  of  the  buzzer  sounding,  release  the  brake  pedal  and
press the “POWER” switch.
The hybrid system does not start and modes will be changed each time the
switch is pressed. ( oP.   2 4 4 )
STEP 3  
         
        
        
     
        
        Page 659 of 728
621
6-1. Specifications
6
Vehicle specifications
PRIUS PHV_OM_OM47A11U_(U)
Fuel
Fuel typeUnleaded gasoline only
Octane Rating 87 (Research Octane Number 91) or higher
Fuel tank capacity
(Reference)10.6 gal. (40 L, 8.8 Imp.gal.)
NOTICE
■Notice about fuel
For  plug-in  hybrid  vehicles,  fuel  may  remain  in  the  tank  for  a  long  time  and
undergo  changes  in  quality  depending  on  the  how  the  vehicle  is  used.
Refuel  at  least  5.3  gal.(20  L,  4.4  Imp.gal.)  of  fuel  every  6  months  (refuel  a
total  of  at  least  5.3  gal.  [20  L,  4.4  Imp.gal.]  over  a  6-month  period),  as  this
may affect components of the fuel system or the gasoline engine.