2015 TOYOTA HILUX oil change

972. Instrument cluster
2
Instrument cluster
HILUX_OM_OM0K219E_(EE)
*1: These lights turn on when the engine switch is turned to the “ON” positionto indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate a malfunction.
*3: The light turns to yellow (except for Russia and Ukraine) or flashes (forRussia and Ukraine) to indicate a malfunction.
(if equipped)
Unengaged “Park”
warning light ( →P. 452)*1
(diesel engine)
Engine oil change
reminder light ( →P. 453)
*1
(diesel engine)
Low engine oil level
warning light ( →P. 453)*2
(4WD models)
Four-wheel drive
indicator light ( →P. 450)
HILUX_OM_OM0K219E_(EE).book Page 97 Wednesday, May 14, 2014 3:06 PM

1694-1. Before driving
4
Driving
HILUX_OM_OM0K219E_(EE)
NOTICE
■When encountering flooded roads
Do not drive on a road that has flooded after heavy rain etc. Doing so may
cause the following serious damage to the vehicle:
● Engine stalling
● Short in electrical components
● Engine damage caused by water immersion
In the event that you drive on a flooded road and the vehicle is flooded, be
sure to have any authorized Toyota deale r or repairer, or another duly quali-
fied and equipped professional check the following:
● Brake function
● Changes in quantity and quality of oil and fluid used for the engine, trans-
mission, transfer (4WD models), differential, etc.
● Lubricant condition for the propeller shaft, bearings and suspension joints
(where possible), and the function of all joints, bearings, etc.
HILUX_OM_OM0K219E_(EE).book Page 169 Wednesday, May 14, 2014 3:06 PM

3856-3. Do-it-yourself maintenance
6
Maintenance and care
HILUX_OM_OM0K219E_(EE)
■Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the following
situations, oil consumption may increase, and engine oil may need to be
refilled in between oil maintenance intervals.
●When the engine is new, for example directly after purchasing the vehicle or
after replacing the engine
● If low quality oil or oil of an inappropriate viscosity is used
● When driving at high engine speeds or with a heavy load, when towing, or
when driving while accelerating or decelerating frequently
● When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
■ After changing the engine oil (diesel engine except for KUN25L-PRMDH
model
*)
The engine oil maintenance data should be reset. Perform the following pro-
cedures:
Switch the display to the trip meter A ( →P. 102) when the engine switch is
in the “ON” position.
Turn the engine switch to the “LOCK” position.
While pressing the odometer/trip meter display change button ( →P. 102),
turn the engine switch to the “ON” position (do not start the engine because
reset mode will be canceled). Continue to press and hold the button for
more than one second after the trip meter displays “000000”.
*: The model code is indicated on the manufacturer’s label or plate. (→ P. 494)
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 385 Wednesday, May 14, 2014 3:06 PM

4537-2. Steps to take in an emergency
7
When trouble arises
HILUX_OM_OM0K219E_(EE)
*1: The model code is indicated on the manufacturer’s label or plate. (→ P. 494)
*2: Driver’s seat belt buzzer:
The driver’s seat belt buzzer sounds to alert the driver that his or her seat
belt is not fastened. The buzzer sounds intermittently for 30 seconds after
the vehicle reaches a speed of 15 km/h (9 mph). Then, if the seat belt is
still unfastened, the buzzer will sound in a different tone for 90 more sec-
onds.
*3: Except for KUN25L-PRMDH model*1
Low engine oil level warn-
ing light (diesel engine)
*3
Indicates that engine oil
level is low
Check the level of engine oil
and add more oil if neces-
sary.
(remains on)
Engine oil change
reminder light (diesel
engine)
*3
XExcept for Russia and
Ukraine
Indicates that the engine
oil should be changed
Comes on approximately
30000 km (18000 miles)
after the engine oil has
been changed (and the oil
maintenance data has
been reset)
XFor Russia and Ukraine
You have forgotten to reset
the oil change system
Change the engine oil in
accordance with the main-
tenance schedule.
Have the engine oil and oil
filter checked and/or
changed by any authorized
Toyota dealer or repairer, or
another duly qualified and
equipped professional. After
changing the engine oil, the
oil change system should be
reset. ( →P. 385)
Warning lightWarning light/DetailsCorrection procedure
HILUX_OM_OM0K219E_(EE).book Page 453 Wednesday, May 14, 2014 3:06 PM

4988-1. Specifications
HILUX_OM_OM0K219E_(EE)
XGasoline engine
*: The engine oil capacity is a reference quantity to be used when changingthe engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 0W-20, 5W-20
or 5W-30 engine oil is recom-
mended.
Lubrication system
Oil capacity
(Drain and refill  Reference
*)
With filter
Without filter5.6 L (5.9 qt., 4.9 Imp.qt.)
5.3 L (5.6 qt., 4.7 Imp.qt.)
Temperature range anticipated
before next oil change
HILUX_OM_OM0K219E_(EE).book Page 498 Wednesday, May 14, 2014 3:06 PM

501
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
Recommended viscosity (SAE):
SAE 0W-30 is filled into your
Toyota vehicle at manufactur-
ing, and the best choice for
good fuel economy and good
starting in cold weather.
Oil viscosity (0W-30 is explained here as an example):• The 0W in 0W-30 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 30 in 0W-30 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
Temperature range anticipated
before next oil change
Preferred
HILUX_OM_OM0K219E_(EE).book Page 501 Wednesday, May 14, 2014 3:06 PM

503
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
Recommended viscosity (SAE):
SAE 5W-30 is filled into your
Toyota vehicle at manufactur-
ing, and the best choice for
good fuel economy and good
starting in cold weather.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 5W-30 engine
oil is recommended.
Oil viscosity (5W-30 is explained here as an example):• The 5W in 5W-30 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 30 in 5W-30 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
Temperature range anticipated
before next oil change
Preferred
HILUX_OM_OM0K219E_(EE).book Page 503 Wednesday, May 14, 2014 3:06 PM

505
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
Recommended viscosity (SAE):
SAE 5W-30 is the best choice
for good fuel economy and
good starting in cold weather.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 5W-30 engine
oil is recommended.
Oil viscosity (5W-30 is explained here as an example):• The 5W in 5W-30 indicates the characteristic of the oil which
allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 30 in 5W-30 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
Temperature range anticipated
before next oil change
Preferred
HILUX_OM_OM0K219E_(EE).book Page 505 Wednesday, May 14, 2014 3:06 PM