2015 TOYOTA HILUX clutch

2274-5. Using the driving support systems
4
Driving
HILUX_OM_OM0K219E_(EE)
The A.D.D. can be engaged or disengaged by the shifting operations
described in the following shifting procedures.
■Shifting from H2 to H4Reduce your speed to less than 80 km/h (50 mph).
Move the front drive control lever.
■Shifting from H4 to H2
Simply move the front drive control lever.
In both cases, you need not depress the clutch pedal. (manual trans-
mission)
Stop the vehicle.
Shift the shift lever to N.
Move the front drive control lever.
A.D.D. (automatic disconnecting differential) (if equipped)
Shifting between H2 and H4
Shifting between H4 and L4 (automatic transmission)
1
2
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 227 Wednesday, May 14, 2014 3:06 PM

2284-5. Using the driving support systems
HILUX_OM_OM0K219E_(EE)■
Shifting from H4 to L4
Stop the vehicle or reduce your speed to less than 8 km/h
(5 mph).
With your foot off the accelerator pedal, depress the clutch pedal.
Move the front drive control lever.
■Shifting from L4 to H4Depress the clutch pedal.
Move the front drive control lever.
■Four-wheel drive usage frequency (vehicles with A.D.D.)
You should drive in four-wheel drive for at least 16 km (10 miles) each month.
This will assure that the front drive components are lubricated.
■ Shifting between H2 and H4
●If you have trouble shifting in cold weather, reduce your speed or stop the
vehicle and reshift.
● If the four-wheel drive indicator does not go off when you shift from H4 to
H2, drive straight ahead while accelera ting or decelerating, or drive in
reverse.
■ Shifting to L4 (vehicles with VSC)
VSC is automatically turned off.
Shifting between H4 and L4 (manual transmission)
1
2
3
1
2
HILUX_OM_OM0K219E_(EE).book Page 228 Wednesday, May 14, 2014 3:06 PM

2314-5. Using the driving support systems
4
Driving
HILUX_OM_OM0K219E_(EE)
XAutomatic transmission
4WD models only: Before using the rear differential lock system, try
shifting the front drive control lever into L4. If this is not sufficient,
use the rear differential lock system as well.
Be sure to stop the wheels.
Press the rear differential lock switch.
Gently depress the accelerator pedal.
After the rear differential is locked, the indicator will come on.
Unlock the rear differential as soon as the vehicle moves.
XManual transmission
4WD models only: Before using the rear differential lock system, try
shifting the front drive control lever into L4. If this is not sufficient,
use the rear differential lock system as well.
Be sure to stop the wheels.
Depress the clutch pedal.
Press the rear differential lock switch.
Slowly release the clutch pedal.
After the rear differential is locked, the indicator will come on.
Unlock the rear differential as soon as the vehicle moves.
Using the rear differential lock system
1
2
3
4
1
2
3
4
5
HILUX_OM_OM0K219E_(EE).book Page 231 Wednesday, May 14, 2014 3:06 PM

2394-5. Using the driving support systems
4
Driving
HILUX_OM_OM0K219E_(EE)
XVehicles with the DPF system switch
If the DPF system warning light and the indicator light on DPF system
switch turn on or flash, follow the procedure below to regenerate.
Stop the vehicle in a safe place.
Firmly set the parking brake and shift the shift lever to P (automatic
transmission) or N (manual transmission). Release the clutch
pedal.
Do not stop the engine.
Also, make sure that there are no flammable materials near the exhaust
pipe. ( →P. 241)
Press the switch.
The DPF system warning light and
the indicator light on the switch will
change from solid or rapid flashing
to slow flashing, and the idling
engine speed will increase.
Regeneration will take around 20 -
30
* minutes to complete.
When the DPF system warning
light goes out, the idling engine
speed will have finished returning
to normal.
*: Differs in accordance with the outside temperature.
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 239 Wednesday, May 14, 2014 3:06 PM

2404-5. Using the driving support systems
HILUX_OM_OM0K219E_(EE)
■Regeneration with the DPF system switch (if equipped)
●After pressing the DPF system switch, do not depress the accelerator pedal
or the clutch pedal (manual transmissi on). Depressing the pedal(s) will stop
regeneration. If regeneration has been stopped, restart regeneration as
soon as possible.
● If regeneration is carried out while the exhaust pipe is hot (for example
directly after driving), it will take less time than when the engine is cold.
■ Replacing the engine oil
Make sure to use an oil of the recommended grade or of matching quality.
(→ P. 500)
■ DPF system warning
Under the following driving conditions , the DPF system warning light may
come on earlier than normal.
*
● When only driving at low speeds (for example 20 km/h [12 mph] or below).
● If the engine is turned on and off frequently (if the engine is not left running
for more than 10 minutes at a time).
*: Differs in accordance with weather, driving conditions, etc.
HILUX_OM_OM0K219E_(EE).book Page 240 Wednesday, May 14, 2014 3:06 PM

3726-2. Maintenance
HILUX_OM_OM0K219E_(EE)
■Where to go for maintenance service?
In order to maintain your vehicle in the best possible condition, Toyota recom-
mends that maintenance service operations as well as other inspections and
repairs be carried out by authorized Toyota dealers or repairers or other duly
qualified and equipped professionals. For repairs and services covered by
your warranty, please visit an authorized Toyota dealer or repairer, who will
use genuine Toyota parts in repairing any difficulties you may encounter.
There can also be advantages in utilizing authorized Toyota dealers or repair-
ers for non-warranty repairs and services, as members of the Toyota network
will be able to expertly assist you with any difficulties you may encounter.
Your Toyota dealer or repairer, or another duly qualified and equipped profes-
sional will perform all of the scheduled maintenance on your vehicle reliably
and economically due to their experience with Toyota vehicles.
■ Does your vehicle need repairs?
Be on the alert for changes in performance and sounds, and visual tip-offs
that indicate service is needed. Some important clues are:
●Engine missing, stumbling or pinging
● Appreciable loss of power
● Strange engine noises
● A fluid leak under the vehicle (However, water dripping from the air condi-
tioning system after use is normal.)
● Change in exhaust sound (This may indicate a dangerous carbon monoxide
leak. Drive with the windows open and have the exhaust system checked
immediately.)
● Flat-looking tires, excessive tire squeal when cornering, uneven tire wear
● Vehicle pulls to one side when driven straight on a level road
● Strange noises related to suspension movement
● Loss of brake effectiveness, spongy feeling brake pedal or clutch pedal,
pedal almost touches the floor, vehicle pulls to one side when braking
● Engine coolant temperature c ontinually higher than normal
If you notice any of these clues, take your vehicle to any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional as
soon as possible. Your vehicle may need adjustment or repair.
HILUX_OM_OM0K219E_(EE).book Page 372 Wednesday, May 14, 2014 3:06 PM

511
8
8-1. Specifications
Vehicle specifications
HILUX_OM_OM0K219E_(EE)
*1: Made in South Africa*3
*2: Made in Thailand*3
*3: See “Checking your vehicle’s model” if you are not sure of which modelyour vehicle is. ( →P. 12)
Differential
Oil
capacity
FrontWithout A.D.D1.45 L (1.53 qt., 1.28 Imp.qt.)
With A.D.D1.65 L (1.74 qt., 1.45 Imp.qt.)
Rear
With rear differential
lock system2.90 L (3.06 qt., 2.55 Imp.qt.)
With LSD3.35 L (3.54 qt., 2.95 Imp.qt.)
Normal2.45 L (2.59 qt., 2.16 Imp.qt.)*1
3.35 L (3.54 qt., 2.95 Imp.qt.)*2
Oil typeWithout LSDHypoid gear oil API GL-5
With LSDHypoid gear oil LSD API GL-5
Oil viscosityWithout A.D.D.
Above -18 °C (0 °F):
SAE90
Below -18 °C (0 °F):
SAE 80W or SAE 80W-90
With A.D.D.SAE 75W-90
Clutch
Pedal free play 5  15 mm (0.2  0.6 in.)
Fluid type SAE J1703 or FMVSS No.116 DOT 3 or
SAE J1704 or FMVSS No.116 DOT 4
HILUX_OM_OM0K219E_(EE).book Page 511 Wednesday, May 14, 2014
3:06 PM

523What to do if... (Troubleshooting)
HILUX_OM_OM0K219E_(EE)
●Vehicles with manual transmission
Do you turn the key with the clutch pedal depressed firmly?
(→ P. 183)
● Vehicles with automatic transmission
Is the shift lever in P? ( →P. 183)
● Is the steering wheel unlocked? ( →P. 185)
● Is the battery discharged? ( →P. 478)
● Is the engine switch in the “ON” position?
If you cannot release the shift lever by depressing the brake
pedal with the engine switch in the “ON” position: →P. 4 7 7
● It is locked to prevent theft of the vehicle if the key is
removed from the engine switch. ( →P. 185)
If you think something is wrong
The engine does not start
The shift lever cannot be shifted from P even if you
depress the brake pedal (vehicles with automatic trans-
mission)
The steering wheel cannot be turned after the engine is
stopped
HILUX_OM_OM0K219E_(EE).book Page 523 Wednesday, May 14, 2014 3:06 PM