2015 TOYOTA CAMRY instrument cluster

772. Instrument cluster
2
Instrument cluster
CAMRY_U (OM33A86U)
Vehicles without a multi-information display
Tachometer
Displays the engine speed in revolutions per minute.
Speedometer
Fuel gauge
Average fuel consumption meter
Display change button
P. 7 9
Odometer/trip meter/average fuel consumption display/set speed
P. 79, 183
Engine coolant temperature display/meter light control display
Displays the engine coolant temperature and meter light control.
Outside temperature display
Displays the outside temperature within the range of -40°F (-40°C) to
122°F (50°C).
Shift position/shift range display
Displays the currently selected the shift position and shift range.
P. 162
Instrument panel light control button
P. 8 0
Gauges and meters
1
2
3
4
5
6
7
8
9
10

782. Instrument cluster
CAMRY_U (OM33A86U)
Vehicles with a multi-information display
Tachometer
Displays the engine speed in revolutions per minute.
Multi-information display
Presents the driver with a variety of driving-related data.
Displays warning messages in case of a malfunction ( P. 456)
Outside temperature display
Displays the outside temperature within the range of -40°F (-40°C) to
122°F (50°C). Low outside temperature indicator comes on when the
ambient temperature is 37°F (3°C) or lower.
Speedometer
Display change button
P. 7 9
Fuel gauge
Odometer and trip meter display
P. 7 9
Shift position/shift range display
Displays the currently selected the shift position and shift range.
P. 162
Engine coolant temperature gauge
Displays the engine coolant temperature.
Instrument panel light control button
P. 8 0
1
2
3
4
5
6
7
8
9
10

792. Instrument cluster
2
Instrument cluster
CAMRY_U (OM33A86U)
Pressing the display change but-
ton changes the display as fol-
lows.
■Odometer
Displays the total distance the vehicle has been driven.
■Tr i p m e t e r A*/trip meter B*
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
■Average fuel consumption (vehicles without a multi-informa-
tion display)
*
Displays the average fuel consumption since the function was
reset.
Use the displayed average fuel consumption as a reference.
*: Press and hold the display change button to reset.
Changing the odometer/trip meter display
Without a multi-in formation display
With a multi-information display

802. Instrument cluster
CAMRY_U (OM33A86U)
The brightness of the Instrument panel lights can be adjusted.
Pressing the button will adjust
brightness of the Instrument panel
lights.
Eco Driving Indicator Light can be
activated or deactivated.
While the odometer is being
displayed, press and hold the
display change button to dis-
play the Eco Driving Indicator
Light customization screen.
Press the display change button to set Eco Driving Indicator Light
to on or off.
Press and hold the display change button to complete the setting.
If off is selected, Eco Driving Indicator Light will not be displayed.
Instrument panel lights control button
Without a multi-in formation display
With a multi-information display
Eco Driving Indicator Light cust omization (vehicles without a
multi-information display)
1
2
3

812. Instrument cluster
2
Instrument cluster
CAMRY_U (OM33A86U)
■Eco driving indicator light
■ The meters and display illuminate when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
■ The brightness of the in strument panel lights
When the tail lights are turned on, the meter’s brightness will be reduced
slightly unless the meter brightness level adjustment is set to the brightest
setting.
If the tail lights are turned on when the surroundings are dark, the meter’s
brightness will reduce slightly. Howe ver, when the surroundings are bright,
such as during the daytime, the meter’s brightness will not be reduced even if
the tail lights are turned on.
■ Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
●When stopped, or driving at low speeds (less than 16 mph [25 km/h])
● When the outside temperature has changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
During Eco-friendly acceleration (Eco
driving), Eco Driving Indicator Light will
turn on. When the acceleration exceeds
the Eco driving accelerator upper limit, or
the vehicle is stopped, the light turns off.
Eco Driving Indicator Light will not operate
in the following conditions:
●
The shift lever is in anything other than
D.
● The paddle shift switch is used. (If
equipped)
● The vehicle speed is approximately 80
mph (130 km/h) or higher.
Without a multi-information display
With a multi-info rmation display

822. Instrument cluster
CAMRY_U (OM33A86U)
NOTICE
■To prevent damage to the engine and its components
● Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● Vehicle without a multi-information display: The engine may be overheat-
ing if the rightmost segment of the engine coolant temperature display is
flashing. In this case, immediately stop the vehicle in a safe place, and
check the engine after it has cooled completely. ( P. 493)
Vehicle with a multi-information display: The engine may be overheating if
the engine coolant temperature gauge is in the red zone (H). In this case,
immediately stop the vehicle in a safe place, and check the engine after it
has cooled completely. ( P. 493)

832. Instrument cluster
2
Instrument cluster
CAMRY_U (OM33A86U)
The multi-information display presents the driver with a variety of vehi-
cle data.
●Menu icons
Displays the following informa-
tion when an icon is selected.
( P. 84)
Some of the information may be
displayed automatically
depending on the situation.
Drive information
Select to display various drive data. ( P. 85)
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Dynamic radar cruise control operation guide (if equipped)
Select to display operation procedures of the dynamic radar cruise
control. ( P. 188)
The tab will change to when the vehicle is in constant
speed control mode. ( P. 194)
If activated, the operational status of the LDA (Lane Departure Alert)
system will also be displayed. (If equipped) ( P. 202)
Multi-infor mation display (if equipped)
Display contents

842. Instrument cluster
CAMRY_U (OM33A86U)
Warning message display
Select to display warning messages and measures to be taken if a
malfunction is detected. (P. 456)
Settings display
Select to change the meter display settings. ( P. 86)
■
Operating the meter control switches
Scroll up/down the screen
and move up/down the cur-
sor
Switch menu/Displays the
top screen
Press: Enters/Sets
Press and hold: Resets
Returns to the previous
screen
1
2
3
4