39
D R I V I N G C O N T R O L SREAR REAR REAR REAR
REAR
WINDSHIELD DEMISTER AND HAZARD WINDSHIELD DEMISTER AND HAZARD WINDSHIELD DEMISTER AND HAZARD WINDSHIELD DEMISTER AND HAZARD
WINDSHIELD DEMISTER AND HAZARD
W WW W
W
ARNING ARNINGARNING ARNING
ARNING
Rear Windshield & Outside Rear View Mirror Demister (if fitted) Rear Windshield & Outside Rear View Mirror Demister (if fitted)Rear Windshield & Outside Rear View Mirror Demister (if fitted) Rear Windshield & Outside Rear View Mirror Demister (if fitted)
Rear Windshield & Outside Rear View Mirror Demister (if fitted)
Push the operating switch on the facia to turn the demister ‘ON’. The
demister will switch off automatically after 15 minutes.
NOTICE NOTICENOTICE NOTICE
NOTICE
Clean the rear windshield glass carefully from inside to avoid any
damage to demister heater element.
Hazar HazarHazar Hazar
Hazar
d d d d
d
W WW W
W
ar arar ar
ar
ning ningning ning
ning
Push hazard warning switch on the facia switch. This will switch ‘ON’ all
the outside turn signals and both indicators in instrument panel to flash
simultaneously to warn the other road users about the hazardous
condition of the vehicle.
CAUTION CAUTIONCAUTION CAUTION
CAUTION
If lights do not blink or blink rapidly, it is an indication of problem in
the blinker electrical system or the indicator bulb at front or rear has
fused. Get it rectified immediately.
R RR R
R
ear ear ear ear
ear
W WW W
W
indshield indshield indshield indshield
indshield
W WW W
W
ash & ash & ash & ash &
ash &
W WW W
W
ip ipip ip
ip
e e e e
e (Unlatched Switch)
Push and hold the switch knob for the operation of the wash function
for the desired duration for rear visibility through glass. The function
indicator lights up when wash function is ‘ON’. Alongwith wash fluid
getting sprayed, the wiper also operates with a delay to wipe the
glass surface, through a timer control unit. On release of the switch,
this function stops.
ProCarManuals.com
106
Engine Cooling System Engine Cooling SystemEngine Cooling System Engine Cooling System
Engine Cooling System
If engine overheating occurs, there could be a fault in the
cooling system which may be on account of :
1. Less coolant in the cooling system or dirt/scale having
accumulated inside cooling water passages especially
in the radiator core.
2 . Choking of radiator passages due to foreign material or
damages.
3. Defective thermostat.
4. Defective coolant temperature sensor.
5 . Non operation of electrically operated fans (Controlled
by ECU).
6. Coolant leakage.
7. Radiator cap not sealing properly.
8 . A.C. condenser fan not working
9. Excessive refrigerant charging in the A.C. system.
10. No communication between auxiliary tank and radiator.
P PP P
P
r rr r
r
e ee e
e
v vv v
v
en enen en
en
tion of R tion of Rtion of R tion of R
tion of R
ust F ust Fust F ust F
ust F
or oror or
or
ma mama ma
ma
tion tiontion tion
tion
To prevent rust formation in the radiator use premixed
recommended anti-freeze coolant. This is sufficient to
operate the vehicle upto -40
oC.
C CC C
C
OOLING SY OOLING SYOOLING SY OOLING SY
OOLING SY
STEM STEMSTEM STEM
STEMM A I N T E N A N C E
1.Auxiliary Tank 2. Radiator Pressure Cap
Coolant filling Procedure: Coolant filling Procedure:Coolant filling Procedure: Coolant filling Procedure:
Coolant filling Procedure:
It is recommended that the refilling of the engine coolant
should be carried out at authorized service centre
1. 1.1. 1.
1.
A A A A
A
ir e ir eir e ir e
ir e
v vv v
v
acua acuaacua acua
acua
tion and c tion and ction and c tion and c
tion and c
o oo o
o
olan olanolan olan
olan
t filling ( t filling (t filling ( t filling (
t filling (
V VV V
V
acuum filling) acuum filling)acuum filling) acuum filling)
acuum filling)
Method : Method :Method : Method :
Method :
The coolant refilling in the system is recommended to be
carried out through air evacuation and coolant filling method
for quick filling.
1 . Allow the engine to cool up to ambient temperature.
2 . Keep cabin heater valve (if applicable) at “ON” position
throughout the coolant refilling.
ProCarManuals.com
