2015 SUZUKI NEXA pairing phone
[x] Cancel search: pairing phonePage 195 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
3 K R Q H U H J L V W U D W L R Q
NOTE:
• Up to 5 phones can be registered.
• To set up a new phone, disconnect the
audio player from the unit. Connect the
audio player again after phone setup is
completed if necessary.
• When failed to establish the pairing
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the manual of the phone
in use for how to establish the pairing
with the phone.1) Press the Bluetooth
® setup button (4).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select “Setup Bluetooth”, and
press the knob (1) to determine the
selection.
3) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select “Pairing”, and press
the knob (1) to determine the selection.
4) Select “CAR AUDIO” from the Blue-
tooth
® menu of the phone and establish
the pairing.
Refer to the manual of the phone in use
for further information.
5) Enter the Passkey displayed on the unit
to the phone. (For phones with Blue-
tooth
® version 2.1 or above passkey
input is not required.)6) Press the On Hook button (6).
NOTE:
• When selecting “Go Back”, the previous
menu will be displayed.
• When additionally registering a phone,
operate the same step from 1).
5 H F H L Y L Q J D F D O O
Press the Off Hook button (5) to receive a
call.
( Q G L Q J D F D O O
Press the On Hook button (6) to end a call.
5 H M H F W L Q J D F D O O R Q O \ I R U V X S S R U W H G
P R G H O V
Press the On Hook button (6) to reject a
incoming call. $ G M X V W L Q J W K H O L V W H Q L Q J Y R O X P H
• Turn the VOL PUSH POWER knob (2)
during a call.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing “+” of the switch increases the
volume, pressing “-” of the switch
decreases the volume.
$ G M X V W L Q J W K H U L Q J Y R O X P H
• Turn the VOL PUSH POWER knob (2)
while a call coming in.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing “+” of the switch increases the
volume, pressing “-” of the switch
decreases the volume.
$ G M X V W L Q J W K H F D O O R U U L Q J W R Q H Y R O X P H
Follow the instructions below to adjust the
call or ringtone volume.
1) Press the Bluetooth
® setup button (4).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Setup Tele-
phone”, and press the knob (1) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Sound Set-
ting”, and press the knob (1) to deter-
mine the selection.
To use the hands-free function with this
unit, it is required to register the phone
in advance.
Page 203 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
5 H J L V W U D W L R Q R I D X G L R G H Y L F H V
NOTE:
• To set up a new audio player, disconnect
the phone from the unit. Connect the
phone after audio player setup is com-
pleted if necessary.
• When failed to establish the connection
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the audio player manual
for assistance with the pairing process.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Pairing”,
and press the knob (2) to determine the
selection.
4) Select “CAR AUDIO” from the Blue-
tooth
® menu of the audio player and
establish the pairing.
Refer to the manual of the audio player
in use for further information.
5) Enter the Passkey displayed on the unit
to the audio player.NOTE:
• When selecting “Go Back”, the previous
menu will be displayed.
• When additionally registering audio
devices, operate the same step from 1).
6 H O H F W L Q J W K H % O X H W R R W K
Š D X G L R P R G H
Press the CD button (1).
Each time the button is pressed, the mode
will change as follows: 6 H O H F W L Q J D J U R X S R Q O \ I R U V X S S R U W H G
P R G H O V
Turn the TUNE FOLDER PUSH SOUND
knob (2) to select a group. 6 H O H F W L Q J D W U D F N
• Press the Up button (3) to listen to the
next track.
• Press the Down button (4) twice to listen
to the previous track.
When the Down button (4) is pressed
once, the track currently being played
will start from the beginning again.
) D V W I R U Z D U G L Q J 5 H Z L Q G L Q J D W U D F N
• Hold down the Up button (3) to fast for-
ward the track.
• Hold down the Down button (4) to fast
rewind the track.
NOTE:
Some functions may not be available
depending on Bluetooth
® audio.
' L V S O D \ F K D Q J H
Press the DISP button (5).
Each time the button is pressed, display
will change as follows:
To use Bluetooth
® ready audio devices
with this unit, it is required to register the
devices.
CD
Bluetooth
® audio (if equipped)
AUX (if equipped)
Play time
Track name
Artist name
Album name
Page 204 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
NOTE:
If text data contains more than 12 charac-
ters, the “>” mark will appear at the right
end. Holding down the DISP button (5) for
1 second or longer can display the next
page.
6 H O H F W L R Q R I D X G L R G H Y L F H 6 H O H F W $ X G L R
Follow the instructions below to select an
audio device to be paired with from the
registered audio devices.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select an audio
device to be used, and press the knob
(2) to determine the selection.
5) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Select”, and
press the knob (2) to determine the
selection.
6) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”,
and press the knob (2) to complete the
pairing.
NOTE:
• When selecting “Go Back”, the previous
menu will be displayed.• The phone will be disconnected when the
Bluetooth
® ready audio device is
selected.
/ L V W R I D X G L R G H Y L F H V / L V W $ X G L R
Follow the instructions below to display the
names of the registered audio devices in
sequence.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection. The names of registered
audio devices will be displayed in
sequence.NOTE:
When selecting “Go Back”, the previous
menu will be displayed.
3 D V V N H \ V H W W L Q J 6 H W 3 D V V N H \
Follow the instructions below to set the
security number (Passkey).
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select “Setup Bluetooth”, and
press the knob (2) to determine the
selection.
3) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select “Passkey”, and press
the knob (2) to determine the selection.
4) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select “New Passkey”, and
press the knob (2) to determine the
selection.
5) Press or turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”.
6) Turn the TUNE FOLDER PUSH SOUND
knob (2) to select a number for the first
digit, and press the knob (2) to deter-
mine the selection. Select and deter-
mine numbers for the second, third and
fourth digits in order in the same man-
ner. When not entering up to the eighth
digit, enter blanks for the successive dig-
its.
7) Turn the TUNE FOLDER PUSH SOUND
knob (2) to determine the passkey set-
ting.
NOTE:
When selecting “Go Back”, the previous
menu will be displayed.
Page 218 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
0 3 : 0 $ $ $ &
No playbackThe disc contains unsupported formatted
data.Check the file format.
Sound skips or noise producedSound skipping may occur when playing
VBR (Variable Bit Rate) files.It is not recommended to play VBR files.
8 6 %
Playback does not start when the USB
device is connected.There is no supported format file to play
on this unit.Check the file format.
The current consumption of the USB
device exceeds 1.0 A.Use an USB device with a current con-
sumption lower than 1.0 A.
% O X H W R R W K
Š
Pairing failedThe distance between this unit and the
Bluetooth
® ready device is too far, or a
metallic object may be located between
the Bluetooth® ready device and this unit.Change the location of the Bluetooth
®
ready device.
The Bluetooth
® function of the Blue-
tooth
® ready device is off.Refer to the manual of the Bluetooth
®
ready device. (Some devices have the
power saving function that automatically
activates after a certain time.)
Unable to receive a call.Your current location may be out of ser-
vice area.Drive your vehicle to the service area of
the phone.
The voice quality of hands-free is low
(Distortion, noise etc.).Another wireless device may be located
near the unit.Switch off the wireless device or keep it
away from the unit.
3 U R E O H P
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q
Page 220 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
% O X H W R R W K
Š ( 5 5 2 5 The player developed an error of an
unidentified cause.Disconnect the Bluetooth
® ready device and connect it
again.
When ERROR 1 does not disappear, contact your
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S
) D L O H GFailed to establish pairing Try to establish the pairing again.
0 H P R U \ ) X O OReached the limit for the number of con-
nected device informationDelete information of unnecessary devices and try to
establish the pairing again.
1 R W $ Y D L O Inoperable during driving Operate the system after pulling over your vehicle.
1 R W / L Q N H GPhone is disconnected Try to establish the pairing again.
' L V S O D \
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q