2015 SUZUKI GRAND VITARA engine oil

3-19
OPERATING YOUR VEHICLE
54P00-01E
3) When the engine oil level exceeds the
MAX level on the dipstick, consult your
SUZUKI dealer.Using transaxle
Manual transaxle
5MT model
79MH0303
6MT model
61MS2A004
Starting off
To start off, depress the clutch pedal all the
way to the floor and shift into 1st gear.
After releasing the parking brake, gradually
release the clutch. When you hear a
change in the engine’s sound, slowly press
the accelerator while continuing to gradu-
ally release the clutch.
Shifting
All forward gears are synchronized and
provide quiet and easy shifting. Always
depress the clutch pedal all the way to the
floor before shifting gears. Keep the
engine speed from rising into the red zone
of the tachometer.
EXAMPLE
EXAMPLE

3-24
OPERATING YOUR VEHICLE
54P00-01E
the other hand, the driving mode does not
return to the LOCK mode automatically. You
should select the LOCK mode according to
the driving conditions.
NOTE:
• The information display shows current
driving mode.
• When the ignition switch is turned to
“ON” position or the engine switch is
pressed to change the ignition mode to
“ON”, the AUTO mode is selected auto-
matically.
• The driving mode switch can be oper-
ated when the vehicle is either stopped
or moving.
• Check that the front wheels are in the
straight ahead position when operating
the driving mode switch.
• While making turns or accelerating and
decelerating, operating the driving mode
switch, turning the ignition switch to
“ACC” or “LOCK” position or pressing
the engine switch to change the ignition
mode to “ACC” or “LOCK” may cause a
shock, but this is not a system malfunc-
tion.
• When you operate your vehicle under
conditions that involve wheel spin, such
as driving off-road in the sand or water
or when a wheel has run off the road, the
difference in the amount of revolution
between front wheels and rear wheels
increases (wheels run idle). If this state
continues, the oil temperature of the
driving system parts increases. The 4WD warning light warns of this
condition by blinking. At the same time,
the information display shows this mes-
sage: “AWD SYSTEM HIGH TEMP
AWD IS OFF”.
57L30042
When the 4WD warning light blinks, park
the vehicle at a safe place and run the
engine idle. After a while, the 4WD warn-
ing light will go out and the system will
resume.
Warning and indicator messages
The information display shows the warning
and indicator message when the four-
mode 4WD system is operated, or has a
problem.
NOTICE
• Note that 4WD vehicles are not all-
around vehicles. Observe the fol-
lowing instructions when driving
your vehicle.
– Do not drive through water such
as by crossing a river.
– Do not drive continuously in
places such as sand and mud
where front wheels tend to race.
– When any wheel is in the air for
such reason as running off the
road, do not race it needlessly.
(Continued)
NOTICE
(Continued)
• If the 4WD warning light comes on
or blinks when driving, there may
be something wrong with the four-
mode 4WD system. Have the sys-
tem inspected by an authorized
SUZUKI dealer.
NOTICE
Unevenly worn tires can cause prob-
lems with the 4WD system. Rotate the
tires according to the maintenance
schedule. Refer to “Tires” and “Main-
tenance schedule” in “INSPECTION
AND MAINTENANCE” section for
proper tire rotation procedure.

5-38
OTHER CONTROLS AND EQUIPMENT
54P00-01E
Maintenance
If you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components.
Your air conditioner is equipped with air fil-
ters. Clean or replace them as specified in
“Maintenance schedule” in “INSPECTION
AND MAINTENANCE” section. Have this
job done by your SUZUKI dealer as the
lower glove box must be lowered for this
job.
(For EU countries)
NOTE:
Your vehicle uses the air conditioning
refrigerant HFO-1234yf, commonly called
R-1234yf. R-1234yf replaced R-134a for
automotive applications. Other refriger-
ants are available, but only R-1234yf
should be used in your vehicle.(Except for EU countries)
NOTE:
Your vehicle uses the air conditioning
refrigerant HFC-134a, commonly called
R-134a. R-134a replaced R-12 around
1993 for automotive applications. Other
refrigerants are available, including recy-
cled R-12, but only R-134a should be used
in your vehicle.
Radio antenna
Ty p e A
63J055
Ty p e B
61MM0A113
NOTICE
Using the wrong refrigerant may
damage your air conditioning sys-
tem. Use R-1234yf only. Do not mix or
replace the R-1234yf with other refrig-
erants.
NOTICE
Using the wrong refrigerant may
damage your air conditioning sys-
tem. Use R-134a only. Do not mix or
replace the R-134a with other refrig-
erants.
EXAMPLE
EXAMPLE

INSPECTION AND MAINTENANCE
7
54P00-01E
60G410
INSPECTION AND MAINTENANCE
Maintenance schedule ........................................................ 7-2
Drive belt .............................................................................. 7-20
Engine oil and filter ............................................................. 7-20
Engine coolant .................................................................... 7-26
Air cleaner ............................................................................ 7-28
Spark plugs .......................................................................... 7-29
Gear oil ................................................................................. 7-30
Clutch pedal ......................................................................... 7-32
Fuel filter (diesel engine) .................................................... 7-33
Brakes .................................................................................. 7-33
Steering ................................................................................ 7-35
Tires ...................................................................................... 7-36
Battery .................................................................................. 7-39
Fuses .................................................................................... 7-41
Headlight aiming ................................................................. 7-44
Bulb replacement ................................................................ 7-45
Wiper blades ........................................................................ 7-55
Windshield washer fluid ..................................................... 7-59
Air conditioning system ..................................................... 7-59

7-1
INSPECTION AND MAINTENANCE
54P00-01E
60B128S
WA R N I N G
Take extreme care when working on
your vehicle to prevent accidental
injury. Carefully observe the follow-
ing precautions:
• To prevent damage or unintended
activation of the air bag system or
seat belt pretensioner system, check
that the battery is disconnected and
the ignition switch has been in
“LOCK” position or the ignition
mode has been “LOCK” (OFF) for at
least 90 seconds before performing
any electrical service work on your
SUZUKI vehicle. Do not touch air
bag system components, seat belt
pretensioner system components or
wires.
The wires are wrapped with yellow
tape or yellow tubing, and the cou-
plers are yellow for easy identifica-
tion.
• Do not leave the engine running in
garages or other confined areas.
(Continued)
WA R N I N G
(Continued)
• When the engine is running, keep
hands, clothing, tools, and other
objects away from the fan and drive
belt. Even though the fan may not
be moving, it can automatically
turn on without warning.
• When it is necessary to perform
service work with the engine run-
ning, check that the parking brake
is set fully and the transaxle is in
Neutral.
• Do not touch ignition wires or other
ignition system parts when starting
the engine or when the engine is
running, or you could receive an
electric shock.
• Be careful not to touch a hot
engine, exhaust manifold and
pipes, muffler, radiator and water
hoses.
• Do not allow smoking, sparks, or
flames around fuel or the battery.
Flammable fumes are present.
• Do not get under your vehicle if it is
supported only with the portable
jack provided in your vehicle.
• Be careful not to cause accidental
short circuits between the positive
and negative battery terminals.
(Continued)
WA R N I N G
(Continued)
• Keep used oil, coolant, and other
fluids away from children and pets.
Dispose of used fluids properly;
never pour them on the ground,
into sewers, etc.

7-3
INSPECTION AND MAINTENANCE
54P00-01E
How to understand each table
54P000750
(1) Model of vehicle
(2) Maintenance item
(3) Driving condition
Necessary maintenance operation and timing will vary depending on your driving condition.
Some items have two different conditions of “Normal” and “Severe”, which are defined as follows.
“Normal”: If driving is usually done under normal driving condition
“Severe”: If driving is usually done under severe driving condition
For details of each condition, refer to “Maintenance recommended under severe driving condition” in this section.
If this part is blank, there is no classification in driving conditions.
Forgasoline engine models
Select maintenance timing by mileage (odometer reading) or
whichever comes first.
km (×1000)20406080120miles (×1000)12.52537.55075months1224364872Engine and powertrainEngine accessory drive belt Adjustment, Replacement NormalR ISevereIRValve clearanceI
Exhaust system (except catalyst)I
Drive axle boots/Propeller shafts (4WD)I
Manual transaxle oil Genuine
“SUZUKI GEAR OIL 75W-80”NormalI
SevereIROther than
“SUZUKI GEAR OIL 75W-80”NormalRSevereRl a m r o N ) D W 4 ( l i o r e f s n a r TISevereIR
(2)(3) (4) (5)
(1)
(6)
EXAMPLE

7-4
INSPECTION AND MAINTENANCE
54P00-01E
(4) This means that you should perform the 1st operation of “I”, which is defined as follows, by 40000 km (25000 miles) or 24 months.
Subsequently, you should perform the 2nd and later operation of “I” at the same interval.
“I”: Inspection including cleaning, adjustment, lubrication or replacement as necessary
(5) This means that you should perform the 1st operation of “R”, which is defined as follows, by 60000 km (37500 miles) or 36 months.
Subsequently, you should perform the 2nd and later operation of “R” at the same interval.
“R”: Replacement or change
(6) This shows the case where a genuine “SUZUKI GEAR OIL 75W-80” is used under “Severe” condition. The maintenance interval is
as follows.
By place of destination, maintenance schedule tables are separated. Refer to each of the following pages:
• EU countries (except for Russia)
– for gasoline engine model: (page 7-5)
– for diesel engine model: (page 7-9)
•Mexico
– for gasoline engine model: (page 7-13)
• Except for EU countries and Mexico
– for gasoline engine model: (page 7-17)
km (x1000)
miles (x1000)
months20
12.5
1240
25
2460
37.5
3680
50
48100
62.5
60120
75
72140
87.5
84160
100
96
“I” “R” “I” “R”

7-5
INSPECTION AND MAINTENANCE
54P00-01E
EU countries (except for Russia)
Recommended maintenance items by an authorized SUZUKI dealer or a qualified service technician
For gasoline engine models
Select maintenance timing by mileage (odometer reading) or months, which-
ever comes first.
km (×1000)20406080120160miles (×1000)12.52537.55075100months122436487296Engine and powertrain
Engine accessory drive belt Adjustment, Replacement NormalIRSevereIR
Valve clearanceI
Exhaust system (except catalyst)I
Drive axle boots / Propeller shafts (4WD)I
Manual transaxle oil Genuine
“SUZUKI GEAR OIL 75W-80”NormalIR
SevereIR
Other than
“SUZUKI GEAR OIL 75W-80”NormalRSevereR
Transfer oil (4WD) NormalIRSevereIR
Rear differential oil (4WD) NormalIRSevereIR
Fuel and emission control system
Fuel linesI
Fuel tankI
PCV valveI
Fuel evaporative emission control systemI