2015 SKODA RAPID SPACEBACK USB port
[x] Cancel search: USB portPage 46 of 84
A list of devices, supported regions and applications that the Apple CarPlay
connection supports, can be obtained from the Apple website.
Home menu
Fig. 30
Apple CarPlay: Main menu
Connection set-up
›
Connect the device to the USB input » Vehicle operating instructions .
The main menu of the Apple CarPlay connection is displayed » Fig. 30.
The first connection of the device to the device must be made when the vehi-
cle is not moving.
During the first connection establishment it is necessary to confirm the con-
nection request in the device screen.
Main menu - function keys and information Push - Return to the main menu of the Apple CarPlay connection / Hold -
Switch on the Siri voice control
List of available applications
Other pages with applications (by running your finger sideways across the
screen or by turning the dial, the next page can be displayed
)
Return to the main menu of the Apple CarPlay connection from another device menu
› To return to the main menu of the Apple CarPlay connection (e.g. from the
menu Radio), press the key
→ Apple CarPlay .
Start the application › In the main menu of the Apple CarPlay connection select the desired applica-
tion in the field
A
» Fig. 30 .
Disconnection
› Disconnect the device from the USB input.
or
› In the main menu of the Apple CarPlay connection press the function key
→ .
AB
Function problems
If problems occur with the Apple CarPlay connection, then one of the following
messages may occur in the display.MessageMeaning… Unable to connect to mobile device. … is already connected via Apple Car-
Play. ...The device allows only one active connection.SmartLink: ... has been disconnected.Check the connection to the USB input.Unable to connect. … is not supported by the mobile device.The connection type is not supported by the connected device.Please note that this UBS port may not support Apple CarPlay. Use a different
USB port and try again.The Apple CarPlay connection is not supported by the USB input. Connect the
external device to a different USB port.43SmartLink
Page 47 of 84
MirrorLink
Introduction
This chapter contains information on the following subjects:
Home menu
44
Operation
45
Function problems
45
The MirrorLink ™
connection can be set up under the following conditions.
The ignition is switched on.
The unit is switched on.
The device to be connected is switched on.
Some applications require that the data connection in the connected device is turned on.
If you want to use the device menu Telephone, then before establishing the
MirrorLink ™
connection with the device then connect the device first via Blue-
tooth ®
.
A device connected using MirrorLink ™
cannot be used as an audio source in the
menu Media.
If route guidance is active at this moment in the device, then this is not termi-
nated by starting the route guidance in the MirrorLink ™
application.
The list of available applications and devices, which support the MirrorLink ™
function, can be seed in the ŠKODA Internet pages www.infotainment.skoda-
auto.com.
Home menu
Fig. 31
MirrorLink ™: Main menu
Connection set-up
The device saves the last 10 connected devices.›
Connect the device to the USB input » Vehicle operating instructions .
›
Press the key
→ MirrorLink™ .
In the main menu the MirrorLink ™
connection is shown » Fig. 31.
During the first connection set-up proceed as follows.
›
Connect the device to the USB input.
›
Press the key
→ MirrorLink™ .
›
Press the function key in the displayed main menu SmartLink
.
›
Select the desired device.
›
Confirm the message concerning the connection in the device screen.
In the main menu the MirrorLink ™
connection is shown » Fig. 31.
Main menu - function keys and information Disconnection and return to the main menu SmartLink
Displays a list of running applications with the ability to terminate them
Displays the screen contents of the connected device (while an application
is running)
Settings of the MirrorLink ™
function
List of certified applications
Other pages with applications (by running your finger sideways across the
screen or by turning the dial, the next page can be displayed )
Return to the main menu of the MirrorLink ™
connection from another device
menu
› To return to the main menu of the MirrorLink ™
connection (e.g. from the
menu Radio), press the key
→ MirrorLink™ .
Disconnection
› Disconnect the device from the USB input.
or
› In the main menu of the MirrorLink ™
connection press the function key .
The connection will be terminated and the main menu SmartLink is displayed
» Fig. 27 on page 40 -
.
AB44SmartLink
Page 48 of 84
OperationFig. 32
Example of a running application
Start the application
›
In the main menu of the MirrorLink™
connection select the desired applica-
tion.
The application starts and the following function keys are displayed » Fig. 32.
If there is only one available application it will be started automatically after
the MirrorLink ™
connection is established.
A
- Operation of the MirrorLink ™
connection
Return to the main menu of the MirrorLink ™
connection
Keyboard display
Masking the function keys Displays the function keys right / left / lowerB
- Using the connected device, as well as the running application
Depending on the type of the connected device, as well as the current running
application, various function keys of the connected device can be displayed (at
the most three at the same time).
Display hidden function keys › If the icon can be seen in the device screen when the function keys are mut-
ed
then press the controller
.
Display of the running application
› In the list of applications, press the function key
» Fig. 31 on page 44 .
Ending the current application
› Press the function key
→
.
› Press the function key of the desired application with the symbol
.
By pressing the function key Close all, all running applications are closed.
Function problems
If problems occur with the MirrorLink ™
connection, then one of the following
messages may occur in the display.MessageMeaning…: MirrorLink™ connection not available.Check the connection to the USB input.Error: MirrorLink™Error: transferDisconnect the device and reconnect to the USB input.MirrorLink™ Audio is not available.A problem with the playback of audio files. Disconnect the device and recon-
nect.MirrorLink™ availability on this mobile device is restricted.The MirrorLink ™
version of the connected device is supported by the device on-
ly when the vehicle is not moving.Connection failed. MirrorLink™ is not supported by this mobile device.The connected device is not supported.The mobile device is locked. Please unlock the mobile device in order to use
MirrorLink™“Unlock” the connected device. 45SmartLink
Page 49 of 84
MessageMeaningThe app is unavailable while the vehicle is in motion.
The application is only available when the vehicle is stationary.
App während der Fahrt nicht verfügbar. The app is not certified or the certifi-
cation restricts use while the vehicle is in motion.App is not compatible.The application is not certified.The app is unavailable while the vehicle is in motion. The app is not available
in this country.In the country of operation, the application is available only when the vehicle is
at a standstill.Unable to start app or app not working.A problem with the start of the application. Disconnect the device and recon-
nect to the USB input.No compatible apps found on this mobile device. This device may not support
MirrorLink™.There is no certified MirrorLink ™
application available in the device.46SmartLink
Page 56 of 84
The search areas menu for POIs » Fig. 40
Search in immediate vicinity
Search near destination
Search near stopover
Along the route
Search near address
Within the area of the map point
In the option selection Near address and Select on map , the function key Edit
is displayed. The entered search area for the POIs can be edited by pressing
this function key.
Import my destinations
Introduction
This chapter contains information on the following subjects:
Custom destination in vCard-format
53
My POI categories
53
In this chapter, destinations are described which can be imported into the de-
vice memory.
Custom destinations can be created by means of the ŠKODA application
“MyDestination”. More information can be found on the following ŠKODA Inter-
net pages.
http://infotainment.skoda-auto.com
Custom destination in vCard-format
In the device memory, a custom destination can be imported in the vCard for-
mat (*.vcf) from an SD card or a USB source.
Import
›
Insert the SD card into the device or connect a USB source with the file of
custom destination.
›
Press in the Navigation menu the function key
→ Import destinations .
›
Select the source and confirm the import.
Route guidance
›
Press in the Navigation menu the function key
→ Destinations →
→
.
DEFGHI›Press the function key of the vCard to start the route guidance.›Press the function key
Start.
If the menu for setting the alternative routes is turned on, the guidance for
this route type (most economic/fastest/shortest) must be selected before
starting.
If the destination entry occurs during route guidance, the destination change
must be confirmed by pressing the function key Start in addition to confirming
in the following menu that appears.
Delete›
Press in the Navigation menu the function key
→ Destinations →
→
.
›
Press the function key
in the line with the name of your stored custom des-
tination.
›
In the destination details, press the function key Edit → Delete .
›
Confirm the deletion.
My POI categories
In the device memory, custom POI categories that have been created using the
ŠKODA application “MyDestination” can be imported from the SD card.
Import
›
Insert the SD card with the POI categories into the device.
›
Press in the Navigation menu the function key
→ Version information →
Update .
›
Select the SD card as the source and confirm the import.
If there is already the same POI category name in the device, then it will be
overwritten during import.
Custom POI categories can be displayed on the map.
›
Press in the Navigation menu the function key
→ Map → Select catego-
ries for POIs → My points of interest (Personal POI) .
Route guidance to a destination of another category
›
Press in the Navigation menu the function key
→ Other POIs .
›
Press the function key
A
» Fig. 40 on page 52 .
›
Select the search area.
›
Press the function key
B
» Fig. 40 on page 52 → My Points of Interest (Per-
sonal POI) .
›
Select the desired category of own destinations.
›
Press the function key Start.
53Navigation (Amundsen)
Page 76 of 84
Language characters15
LEAVING HOME67
Light67
Light assistance67
Light sensor - switch-on the lights67
List connected SmartLink devices
40
of available stations18
of telephone contacts35
Paired Bluetooth devices33
Stored destinations50
Traffic reports61
With folder / track list23
Locking/unlocking - Warning67
Luggage compartment - opening67
Luggage compartment cover67
M
Main menu CAR
64
Media22
Navigation47
Radio17
SmartLink40
SMS38
Manage favourites30
Manage memory63
Manoeuvre graphical driving recommendations
58
Nav. announcements58
Manoeuvring66
Map automatic scale
55
Display of traffic signs63
Display options54
Fast Map55
Lane recommendation63
Main menu54
Manual scale55
Map alignment56
Operation54
Orientation55
POI display63
Representation54
Road sign55
Media22
Audio source24
AUX26
Bluetooth Audio26
Browser23
File formats27
Foreword22
List23
Main menu22
Multimedia database24
Operation22
Playback23
safe removal of the data source16
SD card25
Select audio source22
Settings24
Supported media27
USB25
Voice control11
Memory function of remote control key68
Menu CAR64
Mirror Fold in when parked
67
Lower while reversing67
Synchronous adjustment67
MirrorLink44
Connection establishment44
Data transmission16
Disconnection44
Function problems45
Home menu44
Operation45
Mobile device data transfer16
Most common routes58
Multi-function display68
Multi-media AUX26
Multimedia USB
25
Multimedia database24
Mute9
My destinations50, 53
My Destinations50
My POI categories53
My POIs53
My tour59
Edit tour60
New tour59
N
Navigation
47
Abort route guidance59
Advanced settings63
Alternative routes62
Contacts50
Demo mode63
Destination details57
Destination memory50
Destination representation54
Dynamic route62
Edit tour60
Enter address48, 49
Enter destination in route50
Favourites50
Finish route guidance59
Foreword47
Fuel options63
GPS47
graphical driving recommendations58
Home address51
Image with GPS29
Import destination53
Imported destinations63
Input destination48
lagged destination51
73Index
Page 79 of 84
Telephone Search32
Text messages37, 38
new38
received39
Time15
TMC Detail of the traffic report
61
dynamic route62
List of the traffic reports61
Requirements60
TMC (Traffic reports)60
Touch screen8
Tour59
Tour memory60
Traffic Detail of the traffic report
61
dynamic route62
List of the traffic reports61
Requirements60
Traffic jam ahead62
Traffic obstruction62
Traffic programme (TP)19
Traffic reports (TMC) Detail of the traffic report
61
List of the traffic reports61
Requirements60
Travel mode light67
Turning off the device8
Turning on the device8
Tyre pressure values65
Tyres65
U
Unit menus
8
Units16
USB25
User profile30
V
vCard
53
Vehicle - settings64
Vehicle condition65
Vehicle identification number68
Vehicle systems64
Ventilation70
VIN number68
Voice control11
commands13
Function requirements11
Help12
not recognizing a voice command12
Operation principle12
Settings16
Stop/restore input/13
switching on/off11
Voice command input correction13
Volume9
Volume setting9
W
Waiter Voice control
12
Warning messages65
Warning when unlocking /locking67
Window - Operation67
Window comfort operation67
Window operation67
Windscreen Automatic wiping when raining
67
Heating64, 69
Windscreen heating64
Wiper67
76Index