
2.8
STOP AND START FUNCTION (3/4)
Conditions preventing the 
standby of the engine
Certain conditions prevent the system 
from using the engine standby function, 
including when:
–  reverse gear is engaged;
–  the bonnet is not locked;
–  the driver’s door is not closed;
–  the driver’s seatbelt is not fastened;
–  the outdoor temperature is too low or  too high (less than around 0 °C or 
higher than around 30 °C);
–  the battery is not sufficiently charged;
–  the difference between the vehicle  interior temperature and the auto-
matic climate control instruction is 
too high; –  for vehicles with automatic gear-
boxes, the gradient is steeper than 
approximately 12%;
–  the “Clear View” function is activated  (please see “Automatic Climate 
Control” in Section 3);
–  the engine temperature is too low;
–  the anti-pollution system is required;
or
– ...
the warning light 
 or, depending 
on the vehicle, the message “AUTO 
STOP UNAVAILABLE” appears on the 
instrument panel indicating that engine 
standby is not available.
Deactivate the Stop and 
Start function when per-
forming any operations in 
the engine compartment.
Special cases
With the engine on standby (traffic jam, 
traffic lights, etc.), if the driver unfastens 
their seat belt, opens the driver’s door 
or gets out of their seat, the ignition will 
be switched off.
To restart and reactivate the Stop and 
Start system, press the start button 
(please see “Starting, stopping the 
engine” in Section 2). 

2.9
STOP AND START FUNCTION (4/4)
1
2
Special feature of the automatic 
engine re-start
Under certain conditions, the engine 
can restart on its own in order to guar-
antee your safety and comfort.
This can occur especially when:
–  the outdoor temperature is too low or too high (less than around 0 °C or 
higher than around 30 °C);
–  the “Clear View” function is activated  (please see “Automatic Climate 
Control” in Section 3);
–  the battery is not sufficiently charged;
–  the vehicle speed is above 3 mph  (5 km/h) (downhill slope, etc.);
– repeated pressing on the brake  pedal or braking system require-
ment;
– ...
In the event of an emer-
gency, the engine can be 
restarted by pressing on the 
clutch pedal if the Stop and 
Start function is activated.
Deactivating, activating the 
function
Press switch 1  to deactivate the func-
tion. The message “Stop & Start deac-
tivated” will appear on the instrument 
panel and the integrated warning light  2 
on the switch will light up.
Pressing again will reactivate the 
system. The message “Stop & Start ac-
tivated” will appear on the instrument 
panel and the integrated warning light  2 
on switch 1 will go out. The system reactivates automati-
cally each time the vehicle is started 
using the start button (please refer 
to “Starting, stopping the engine” in 
Section 2).
Operating faults
When the message “Check Stop & 
Start” appears on the instrument panel 
and the integrated warning light 
2 lights 
up on the switch  1, the system is deac-
tivated.
Please consult an authorised dealer.
Before getting out of the 
vehicle, you must switch 
off the ignition by pressing 
the engine stop (please see 
“Starting, stopping the engine”).
Note: With the engine on standby, 
press switch 1  to automatically re-
start the engine.  

3.1
Section 3: Your comfort
Air vents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.2
Manual air conditioning and heating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . .  3.4
Automatic climate control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . .   3.7
Air conditioning: information and advice on use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . .  3.11
Electric windows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.12
Roof sun blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.14
Interior lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.15
Passenger compartment storage space and fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
.   3.16
Ashtray, cigarette lighter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . .   3.20
Rear bench seat: functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . .   3.22
Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.23
Rear parcel shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.24
Boot storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.26
Transporting objects in the boot  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . .   3.27
Transporting objects: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . .   3.28 towing, attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . .  3.28
Luggage net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . .  3.29
Roof bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.31
Spoiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3.31
Multimedia equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . .   3.32 

3.7
Varying the ventilation speed
In automatic mode, the system uses 
the most suitable amount of air to reach 
and maintain the desired comfort level.
You can still adjust the ventilation 
speed by turning control 6 to increase 
or reduce the ventilation speed.
Adjusting the air temperature
Turn control  2 to obtain the desired 
temperature. 
Turning the control to the right in-
creases the temperature.
Special note: the maximum and mini-
mum settings allow the system to pro-
duce a minimum or maximum tempera-
ture (18°C and 26°C).
The controls
1   Automatic mode.
2   Air temperature adjuster.
3   “Clear View” function.
4   Passenger compartment air distribu-
tion adjustment.
5   Air conditioning control.
6   Adjusting the ventilation fan speed.
7   Air recirculation.
8   De-icing/demisting of the rear screen 
and, depending on the vehicle, the 
door mirrors.
AUTOMATIC CLIMATE CONTROL (1/4)
235
786
Automatic mode
The automatic climate control system 
guarantees comfort in the passen-
ger compartment and good visibility 
(except in the event of extreme condi-
tions), while optimising consumption. 
The system controls the ventilation 
speed, air distribution, air recirculation, 
and starting and stopping the air condi-
tioning and air temperature.
AUTO: allows the selected comfort 
level to be best attained, depending on 
the exterior conditions. Press button  1.
14  

3.8
Clear View function
Press button 3 – the integrated indica-
tor light comes on.
This function quickly demists and de-
ices the windscreen, the rear screen, 
the front side windows, and the door 
mirrors (depending on the vehicle). The 
air conditioning and rear screen de-ic-
ing functions must be activated.
Press button 8 to stop the heated rear 
screen operating, and the integrated in-
dicator goes out.
To exit this function, press button 3 
or 1.
AUTOMATIC CLIMATE CONTROL (2/4)
ØThe air flow is distributed be-
tween all the air vents, the 
front side window demisting air vents 
and the windscreen demisting vents.
½The air flow is mainly directed 
to the dashboard air vents.
¿The air flow is directed mainly 
towards the footwells.
Adjusting the distribution 
of air in the passenger 
compartment
Press one of the buttons 4 . The in-
tegrated warning light in the button 
comes on.
It is possible to combine two positions 
simultaneously – press both buttons  4.
8
3
Some buttons have an operating 
tell-tale which indicates the operat-
ing status.
14  

3.9
Rear screen de-icing/
demisting
Press button 8 – the integrated indica-
tor light comes on. This function en-
ables rapid demisting or de-icing of the 
rear screen and de-icing of the door 
mirrors (on equipped vehicles).
To exit this function, press button 8 
again. Demisting automatically stops.
AUTOMATIC CLIMATE CONTROL (3/4)
8
Switching air conditioning on 
or off
In automatic mode, the system switches 
the air conditioning system on or off, 
depending on the climate conditions.
Press button 5  to switch off the air 
conditioning; the integrated indicator 
comes on.
5
9
Vehicles fitted with the ECO 
mode (button  9 ): Once activated, 
the ECO mode may reduce the ef-
fective performance of the air condi-
tioning. Please refer to the informa-
tion on “Driving advice, Eco-driving” 
in Section 2.   

3.10
AUTOMATIC CLIMATE CONTROL (4/4)
76
Air recirculation (isolation of 
the passenger compartment) 
K
This function is managed automatically 
(operation is confirmed by a warning 
light on button 7), but you can also acti-
vate it manually.
The system determines whether or not 
the air recycling function is used, based 
on the quality of the outside air.Stopping the system
Turn control 6
 to “OFF” to stop the 
system. To start, turn control  6 again 
to adjust the blower speed or press 
button 1.
1
Manual use
Press button 7 – the integrated indica-
tor light comes on.
Prolonged use of this position may lead 
to odours, caused by non-renewal of 
air, and the formation of condensation 
on the windows.
We therefore advise you to return to au-
tomatic mode as soon as air recircula-
tion is no longer needed, by pressing 
button 7.
To exit this function, press button  7 
again.
The demisting/de-icing will still take 
priority over the air recirculation.