2015 Peugeot RCZ steering

203
RCZ_en_Chap10b_RT6-2-8_ed01-2015
The system is protected in such a way that it will only
operate in your vehicle.
PEUGEOT Connect Navigation (RT6)
01 First steps - Control panel
For safety reasons, the driver must only carry out
operations
which require prolonged attention while the
vehicle is stationary

.
When the engine is switched off and to prevent
discharging of the battery, the system switches off
following the activation of the energy economy mode.
CONTENTS
02

Steering mounted
controls
03

General operation
04


Navigation
- Guidance
05

T
raffic information
06

Using
the telephone
07
Radio
08

Music media players
09


Audio
settings
10
Configuration
11

Screen menu
map p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p. 204
206
207
209
222
225
235
240
246
247
248
GPS navigation system
Multimedia audio system
Bluetooth
® telephone
Frequently asked questions p. 252

02
206
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RADIO: select the previous/next preset
station.
Select the next entry in the address book.SRC/TEL button:
change the audio source,
start a call from the address book,
call/end call on the telephone,
press for more than 2 seconds: access
to the address book.
RADIO: change to the previous radio
station in the list.
Long press: automatic search for a
lower frequency.
CD: select the previous track.
CD: continuous press: fast reverse.
RADIO: change to the next radio station in the list.
Long
press: automatic search for a higher frequency.
CD: select the next track.
CD: continuous press: fast forward play.
Volume increase.
Volume decrease.Mute: press the volume
increase and decrease
buttons simultaneously.
Restore the sound by
pressing one of the
two volume buttons.
STEERING MOUNTEd CONTROLS

06
230
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Press PHONE twice.
Select "d ial" then confirm. Select "
d irectory of contacts" then
confirm.
Dial the telephone number using the
virtual keypad selecting each number
in turn.
Confirm
"OK" to make the call. Press TEL or twice on PHONE.
Calling a new number
Calling a contact
Select the desired contact and confirm.
If access was via the PHONE button,
select "Call"
and confirm.
Select
the number and confirm to start
the call.
Making a callUse of the telephone is not recommended while driving. We recommended
that you park safely or make use of the steering mounted controls.

06
231
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Calling a recently entered numberPress TEL, select "Call list" and
confirm,
Select
the desired number and confirm.
To erase the calls log, press PHONE twice, select "Phone
functions"
and confirm then select " d elete calls log" and confirm.
Ending a call
Press PHONE then select "OK" to end
the call.
Or make a long press on TEL at the
steering mounted controls.
Or make two short presses on TEL at
the steering mounted controls.
Or press the MOd E button, as many
times as necessary, until the telephone
screen is displayed.
Press PHONE to display the calls log. or
Press "OK" to display the contextual
menu then select "Hang up"

and

confirm.
It is always possible to start a call directly from the telephone; park \
the vehicle as a safety measure.

07
236
RCZ_en_Chap10b_RT6-2-8_ed01-2015
By alphabetical list
Press RAd IO, select the station of your
choice
and confirm.
By automatic frequency search
Press 7 or 8 for the automatic search
for
a lower or higher radio frequency.
Or turn the thumb wheel at the steering
mounted controls.
By manual frequency search
Press 5 or 6 to adjust the radio
frequency
step by step.
Selecting a station
The external environment (hill, building, tunnel, underground car park.\
..) may interfere with the reception, including in RDS station tracking mode.
This phenomenon is a normal result of the way in which radio waves are transm\
itted and does not in any way indicate a fault with the audio system.
The
quality of reception is represented by the number of
active waves in this symbol.
Press

RA d IO or OK to display the
contextual menu.
Changing waveband
Select "Change waveband".
Select "FM /
d AB / AM" and confirm.
RAdIO

07
237
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Press the button on the numerical keypad to recall a
preset station.
Or press then turn the thumb wheel at the steering
mounted controls.
Presetting a station
After selecting a station, press one of the buttons on the
numerical keypad for 2 seconds to preset the current
station.
An audible signal confirms that the station has been preset.
Press RAdIO.
Activate / deactivate R d S
RDS, if activated, allows you to continue listening to the same
station
by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the entire country as radio stations do not
cover 100 % of the territory

. This explains the loss of reception of
the station during a journey.
Select "Guidance options " then
confirm.
Activate or deactivate "R
d S" then
confirm.
RAdIO

08
242
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Insert the CD in the player, insert the USB
memory stick in the USB player or connect the
USB peripheral to the USB port using a suitable
cable (not supplied).
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce

the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched of

f or connection of a USB memory
stick. However, the system memorises these
lists
and if they are not modified, the loading
time will be shorter

.
Play starts automatically after a period which
depends on the capacity of the USB memory
stick. Selection of source
The SOURCE button on the steering mounted controls allows a
direct change to the next media source. "C d / C d MP3"
"USB, iPod "
"AUX"
"STREAMING"
"RA
d IO"
Press MUSIC to display the "ME
d IA"
menu.
Select "Following media source " and
confirm.
Repeat the operation as many times as necessary to obtain the
desired media source (except for radio which is accessible either
with SOURCE or RA
d IO).
Sources
MUSIC MEdIA
PLAYERS

259
RCZ_en_Chap10c_RD45_ed01_2015
PEUGEOT Connect Sound (R d 5)
Your PEUGEOT Connect Sound (RD5) is coded in such
a way that it will only operate in your vehicle.
For safety reasons, the driver must only carry out
operations
which require prolonged attention while the
vehicle is stationary

.
When the engine is switched off and to prevent
discharging
of the battery, the audio equipment may
switch of

f after a few minutes.
Audio system / Bluetooth®
01 First steps
02
Steering mounted
controls
03

Main
menu
04
Audio
05

PEUGEOT
Connect USB
06
Bluetooth
07

Screen menu map(s)
Frequently

asked questions p.
p.
p.
p.
p.
p.
p.
p.
260
261
262
263
267
270
273
276
CONTENTS