2015 Peugeot Partner Tepee height

97
Partner_2_VP_en_Chap04_ergonomie_ed02-2014
LOAD SPACE COVER (5 SEAT VERSION)
this rigid shelf conceals the objects
stored in the boot. Removing
Fold the load space cover
.
Detach it from the notches A and B
pulling it towards you.
Raise it and remove the assembly.
Refitting
Place the load space cover in front
of A and B.
Push it forwards to insert the lugs in
the notches.
u

nfold and clip into the notches C.
Folding
From the boot, fold the half-shelf,
raising it to detach it from the notch C. Storing (according to version)
A location is provided in the back of the
rear seats to accommodate the load
space cover folded onto itself.
Slide it vertically between the side
guides located at mid seat back height.
Insert the hinge first, with the free flaps
turned upwards.
t

his rigid load space cover can
form a shelf. However, for safety
reasons, do not place objects
on it which could become dangerous
projectiles in the event of sharp braking
or rear impact.
Practical information
eASe OF uSe and COMFORt
4

11 3
Partner_2_VP_en_Chap05_Securite_ed02-2014
SEAT BELTS
Height adjustment
Squeeze the control with the return and
slide the assembly on the driver's seat
side and on the individual passenger
seat side.
Fastening
Pull the strap, then insert the tongue
into the buckle.
Check that the seat belt is fastened
correctly by pulling the strap.
Seat belt not fastened warning lamp
Unfastening
Press the red button.When the vehicle is started,
this warning lamp comes on
if a user at the front has not
fastened their seat belt.
Good practice
the driver must ensure that
passengers use the seat belts correctly
and that they are all strapped in
securely before moving of
f.
Wherever you are seated in the
vehicle, always fasten your seat belt,
even for short journeys.
The seat belts are fitted with an inertia
reel which automatically adjusts the
length of the strap to your size.
Do not use accessories (clothes pegs,
clips, safety pins, etc.) which allow the
seat belt straps to fit loosely.
e

nsure that the seat belt has reeled in
correctly after use.
After folding or moving a seat or a rear
bench seat, ensure that the seat belt
has reeled in correctly and that the
buckle is ready to accommodate the
tongue.
Depending on the nature and
seriousness of any impact, the
pretensioning device may be deployed
before and independently of inflation
of the airbags. It instantly tightens
the seat belts against the body of the
occupants.
Deployment of the pretensioners is
accompanied by a slight discharge
of harmless smoke and a noise, due
to the activation of the pyrotechnic
cartridge incorporated in the system.
the front passenger's seat may be
fitted with a presence detector, in which
case you should not place anything
heavy on this seat as this could trigger
the alert.
Seat belts
SAFetY
5

121
Partner_2_VP_en_Chap05_Securite_ed02-2014
CHILD SEAT IN THE FRONT*
"Rearward facing"
When a "rearward facing" child seat is
installed on the front passenger seat,
the passenger's front airbag must be
deactivated. Otherwise the child risks
being seriously injured or killed if
the airbag is deployed.
Adjust the vehicle's seat to:
-

the fully back position, with the
backrest straightened for a seat
without height adjuster

,
-

the fully back and highest position,
with the backrest straightened for a
seat with height adjuster

.
"Forward facing"
When a "forward facing" child seat
is installed on the front passenger
seat, the passenger's front airbag must
remain active:
Adjust the vehicle's seat to:
-
the fully bak position, with the
backrest straightened for a seat
without height adjuster

,
-

the fully back position and
highest position, with the backrest
straightened for a seat with height
adjuster

.
e
nsure that the seat belt is
correctly tensioned.
For child seats with a support leg,
ensure that this is in steady contact
with the floor. If not, adjust the
passenger seat.
*

Refer to the legislation in your
country before installin

g your child in
this seating position.
Passenger seat in the fully back and
highest position.
Child safety
SAFetY
5

181
Partner_2_VP_en_Chap09_Caract-technique_ed02-2014
DIMENSIONS (MM)
L Overall length4380
H Overall height 1801-1862
A Wheelbase 2728
B Front overhang 925
C Rear overhang 727
D Width over panels: without mirrors
1810
with mirrors 2112
eWidth of front tracks 1505-1507
F Width of rear tracks 1554-1556
- Length of the loading surface to
the

seat Row 2
990
Row 2, seat fully folded 1343
With front passenger seat folded 3000
Dimensions
teCHNICAL DAtA
9

182
Partner_2_VP_en_Chap09_Caract-technique_ed02-2014
REAR DOORS (mm)
M Max threshold with 205/65 R15 tyre and tailgate trim 582
Hinged doors
tailgate
Small Large
N
u

seable opening height (under panel) 111 8
O Width 4955431582
Dimensions

183
Partner_2_VP_en_Chap09_Caract-technique_ed02-2014
SLIDING SIDE DOORS (mm)
P
u

seable height 1009
Q
u

seablewidth 640
- Height under raised tailgate 1892
Dimensions
teCHNICAL DAtA
9