4
Bipper_en_Chap01_vue-ensemble_ed02-2014
EXTERIOR (LIGHT VAN)
Rear lamp, direction indicators, 3rd brake lamp ..........46-47, 164-165
Right-hand side:
fuel filler cap, fuel tank
...................
142
fuel cut-off ...............................
142-143
l
oad space
.................................
77-78
Rear doors
............................
36, 42-45
Opening/Closing to 180°
...........
42, 44
Number plate lamps
......................164
Rear parking sensors
......................88
Spare wheel, changing a wheel, tools
..................................... 155-157
towing, lifting .................................172
towbar .................................... 137-13
8
Dimensions
.............................
174-175
Accessories
............................
139-140
Roof rack
.......................................
139
Key, remote control, battery
........
36-38
Central locking
.....................
36, 42, 44
Opening/Closing front windows
....... 37
Confidential card .............................. 39
Alarm
...............................................
40
Wiper blades.................................. 156
Door mirrors
..................................... 51
Side repeater
................................. 163
Front lamps, foglamps,
direction indicators
... 46-47, 161-162
Headlamp beam height adjustment ....... 47
Changing bulbs.......................161-16 5
Opening/Closing doors
........
.................... 36, 38, 41-45
Opening the bonnet
....................... 144
Configuration -
Autoclose
.................... 42, 44, 83, 85 Brakes, pads..........................
147, 149
Hill start assist
.................................60
Braking assistance
.................112-113
trajectory control
....................113-115
tyres, pressures
....................159, 183
Snow chains
..................................160
Location
12
Bipper_en_Chap01_vue-ensemble_ed02-2014
INSTRUMENTS AND CONTROLS
Instrument panels, screens, dials ........25
Warning lamps, indicator lamps ......26-33
Indicators, gauge .......................... 34-35Steering wheel, adjustments
...........
53
Horn ...............................................
11 2
Dashboard / Centre console .......18-19
l
ighting controls
......................... 46-47
g
uide-me-home lighting
.................. 47
Parking lamps
.................................. 46
Cruise control
............................. 49-50
Configuration / Personalisation
of the vehicle
...........................84-87
Setting the time........................... 84-85
Headlamp beam height adjustment
... 47
l
ighting dimmer
............................... 35
Anti-slip regulation / Intelligent traction control
..................... 113-115
Reinitialisation of under-infaltion detection
.......
.............................. 11 7
Front/rear foglamps
......................... 47
Fuses
...................................... 167-169
Opening the bonnet
....................... 144 Starting, ignition switch
..............39, 59
Front/rear wipers
.............................48
Screenwash
.....................................48
trip computer
..................................83
e
lectric windows
..............................52
Door mirrors
.....................................51
Location
14
Bipper_en_Chap01_vue-ensemble_ed02-2014
INSTRUMENTS AND
CONTROLS
Steering wheel, adjustment .............53
Horn ............................................... 11 2
Dashboard / Centre console
.......20-21
l
ighting controls
......................... 46-47
g
uide-me-home lighting
.................. 47
Parking lamps
.................................. 46
Cruise control
............................. 49-50 Instrument panels, screens, dials
....
25
Warning laps, indicator lamps .... 26-33
Indicators, gauge
........................ 34-35
g
ear shift indicator
..........................58
Audio steering mounted controls / Hands-free kit
..................90, 93-110
Front/rear wipers
.............................48
Screenwash
.....................................48
trip computer
..................................83
Starting, ignition switch
..............39, 59
Configuration / Personalisation
of the vehicle
...........................84-87
Setting the time........................... 84-85
Adjusting headlamp beams
.............47
l
ighting dimmer
...............................35
Anti-slip regulation / Intelligent traction control
.....................113-115
Reinitialisation of under-inflation detection
.......
..............................11 7
Front/rear foglamps
.........................47
Fuses
......................................167-169
e
lectric windows
.............................. 52
Door mirrors
..................................... 51
Location
23
Bipper_en_Chap02_eco-conduite_ed02-2014
ECO-DRIVING
eco-driving is a range of everyday practices that allow the motorist to o\
ptimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without
waiting. During acceleration change up early.
With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.
t
he gear shift indicator invites you engage the most suitable gear: as
soon as the indication is displayed in the instrument panel, follow it
straight away.
For vehicles fitted with an electronic or automatic gearbox, this
indicator appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively.
t
hese
practices contribute towards a reduction in fuel consumption and CO
2
emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
Control the use of your electrical equipment
Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down (sunroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglamps when the level of light
does not require their use.
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
2
ECO-DRIVING
Motoring & Environment
31
Bipper_en_Chap03_pret-a-partir_ed02-2014
Warning lampisindicates Solution - action
Sidelamps on.a manual selection.
turn the ring on the lighting control stalk to the
first position.
Dipped beam
headlamps on.a manual selection.
turn the ring on the lighting control stalk to the
first position.
Main beam headlamps a pull on the control stalk.Pull the lighting control stalk to return to dipped
beam.
Direction indicators flashing with an
audible signal.a change of direction
using the lighting control
stalk.
to the Right: press the stalk upwards.to the
l eft: press the stalk downwards.
Hazard warning lamps flashing with an
audible signal.
the hazard warning lamp switch,
located in the middle of the
dashboard, has been pressed.the left and right direction indicators, and the
associated warning lamps, flash simultaneously .
Front foglamps on.that the button on the
dashboard has been
pressed. Manual selection.
t
he foglamps only operate if the sidelamps or
dipped beam headlamps are on.
Rear foglamps on.that the button on the
dashboard has been
pressed. Manual selection.
the foglamps only operate if the dipped beam headlamps are
on. When visibility is normal, switch the foglamps of f.
3
READY TO SET OFF
Instruments and controls
47
Bipper_en_Chap03_pret-a-partir_ed02-2014
Headlamp beam
You are advised to adjust the height of the
headlamp beams in accordance with the
load in your vehicle.
t
his function can only be accessed in
the main beam headlamps and dipped
headlamps position.
Press these controls, located
on the dashboard, several times
in succession to adjust the
headlamps.
Foglamps
the controls are located in the dashboard
switch panel.
Front and rear foglamps
the foglamps should only be used in
fog or when snow is falling.
In clear weather or in rain, both day and
night, lit rear fog lamps dazzle and are
prohibited.
Do not forget to switch them off when they
are no longer necessary.
Guide-me-home lighting
the temporary maintaining of the dipped
beam headlamps, after switching of f the
vehicle's ignition, makes the driver's exit
easier when the light is poor by illuminating
the space in front of the vehicle.
Activation
With the ignition key in the STOP position
or removed, pull the lighting stalk towards
the steering wheel within 2 minutes after
switching off the engine.
e
ach time the control is operated, the
duration for which the lamps will remain
on is extended by 30 seconds, up to a
maximum of 210 seconds. Once this period
of time has elapsed, the lamps switch off
automatically.
Deactivation
Pull the lighting stalk towards the steering
wheel for more than 2 seconds.
t
he front foglamps operate with
the sidelamps and the dipped
beam headlamps.
t
he rear foglamps operate with
the dipped beam headlamps.
Press one of these controls to switch on the
lamps.
t
he warning lamp comes on,
accompanied by a message in the
screen, the first time the control is
operated and remains on until the
function is deactivated automatically. An indicator lamp in the screen
indicates the adjustment position
selected (0, 1, 2, 3).
3
READY TO SET OFF
Steering mounted controls
162
Bipper_en_Chap09_aide-rapide_ed02-2014
1 - Dipped beam headlamps
T
ype D, H4 - 55 W
-
Remove the cover by turning it
anticlockwise.
-
Disconnect the electrical connector
.
-
Release the retaining spring by pressing
on the two clips.
-
Change the bulb taking care to align the
metal part with the grooves on the lamp.
2 - Sidelamps
T
ype A, W 5 W - 5 W
-
Remove the cover by turning it
anticlockwise.
-
Pull the bulb holder to gain access to the
bulb.
-
Change the bulb. 3 - Main beam headlamps
T
ype D, H4 - 55 W
-
Remove the cover by turning it
anticlockwise.
-
Disconnect the electrical connector
.
-
Release the retaining spring by pressing
on the two clips.
-
Remove the bulb holder
.
-
Change the bulb taking care to align the
metal part with the groove on the lamp. 4 - Direction indicators
T
ype B, PY 21 W - 21 W amber
- t
urn the bulb holder a quarter turn
anticlockwise.
-
Remove the bulb by pressing it lightly
while turning it anticlockwise.
-
Change the bulb.
If you encounter any dif
ficulty, consult a
P euge O t
dealer or a qualified workshop.
When each operation has been
completed, check the operation of the
lamps.
5 - Foglamps
T
ype E, H1 - 55 W
Contact a P
euge O t
dealer or a qualified
workshop.
Changing a bulb
168
Bipper_en_Chap09_aide-rapide_ed02-2014
Table of dashboard fuses, driver’s
sideMarking RatingFunctions
F12 7.5 ARight-hand dipped beam headlamp supply
F13 7.5 A
l
eft-hand dipped beam headlamp supply - headlamp height
adjuster
F31 5 A
e
ngine control unit supply switch
F32 7.5 AFront lamp - front courtesy lamp - rear courtesy light lamp
F36 10 AAudio system - mobile telephone pre-equipment -
air conditioning control panel -
e ODB diagnostic socket
F37 5 ABrake lamp - instrument panel
F38 20 ADoor locking
F43 15 AScreenwash pump
F47 20 ADriver’s electric window motor supply
F48 20 APassenger’s electric window motor supply
F49 5 AParking sensors control unit - rear lighting switch -
electric door mirrors - volumetric alarm
control unit
F50 7.5 AAirbags control unit
F51 7.5 ASwitch on brake pedal - switch on clutch pedal -
door mirror controls - central Bluetooth
system
F53 5 AInstrument panel - rear foglamps
Changing a fuse