3
208_en_Chap00a_sommaire_ed01-2016
Fuel tank 154
Snow chains 1 58
Towing a trailer
1
59
Energy load
1
61
Accessories
162
Changing a wiper blade
1
64
Fitting roof bars
1
65
Bonnet
167
Checking levels
1
70
Checks
1
73
BlueHDi and AdBlue
® additive 1 74
Straight cut matt paint 1 81
Practical information
Triangle 1 82
Temporary puncture repair kit 1 83
Spare wheel
1
88
Changing a bulb
1
95
Fuses
202
12 V battery
2
08
To w i n g
2 12
Running out of fuel (Diesel)
2
14
In the event of a breakdown
Emergency call 222
Assistance call 2 23
7-inch touch screen
2
25
Audio system / Bluetooth
2
95
Audio system
3
15
Audio equipment and telematics
Alphabetical index Key
Warning
This symbol marks warnings which it is
essential to observe for your own safety,
for the safety of others or to avoid any risk
of damaging your vehicle.
InformationThis symbol draws your attention to
additional information for better use of
your vehicle.
Protection of the environmentThis symbol accompanies advice relating
to protection of the environment.
AdviceThis symbol indicates a reminder of
practical information.
Technical data
General information 2 15
Petrol engines 2 16
Diesel engines
2
17
Dimensions (in mm)
2
18
Identification markings
2
20
Contents
Over view
4
208_en_Chap00b_vue-ensemble_ed01-2016
Exterior view
Remote control key 3 5 -39, 44
- ope ning / closing
-
a
nti-theft protection
-
gu
ide-me-home lighting
-
starting
-
s
witching off
-
battery
-
u
nlocking the vehicle
-
l
ocking the vehicle Boot
4
3
-
ope
ning / closing
-
em
ergency release
Reversing camera
1
46
Temporary puncture repair kit
1
83 -187
Wipers
87- 89
Changing a wiper blade
1
64
Demisting - Defrosting
6
6-67
Changing bulbs
1
99-201
-
r
ear lamps
-
3
rd brake lamp
-
n
umber plate lamps
-
foglamp
Fuel tank, misfuel prevention
1
54-157
Running out of Diesel fuel
2
14
Sunroof blind
7
0
Roof bars
1
65
Accessories
1
62-163
Advice on care
1
81
Roadholding
90-92
Snow chains
1
58
Under- inf lation
15
1-153
Tyre pressures
1
86 -187, 220
Spare wheel
1
88 -194
-
tools
-
r
emoving / refitting
Lighting controls
7
7-83
LED lamps
8
3
Daytime running lamps
8
3
Headlamp beam adjustment
8
5
Cornering lighting
8
6
Changing bulbs
1
95-199
-
f
ront lamps
-
foglamps
-
d
irection indicator repeaters
Door mirrors
7
5 -76
Doors
35
-39, 40
-
ope
ning / closing
-
c
entral locking
-
em
ergency control
Courtesy lamp
6
8
Alarm
4
1- 42
Electric windows
4
6 - 47 Par k Assist
1
47-150
Parking sensors
1
44-145
Towbar
1
59-161
Towing
212-213
Driving
142
208_en_Chap06_conduite_ed01-2016
The collision can be automatically
avoided if the speed difference between
your vehicle and the one ahead is not
more than 9 mph (15 km/h).
Above this threshold, the system will do
what is possible to avoid or reduce the
seriousness of the accident by lowering
the speed of impact.
The automatic braking triggered:
-
c
an be even more effective if the driver
presses the brake pedal more firmly,
-
m
ay stop the vehicle, holding the brakes on
for 1.5 seconds when stationary to allow
the driver time to take back control of the
vehicle,
-
m
ay cause the engine to stall,
-
m
ay give rise to a pumping noise, due to
the pressurisation of the braking system.
Touch screen
Press " MENU" to display the " MAIN
MENU ".
Select " Driving ".
Select " Secondary page ".
Select " Vehicle settings ".
Select the " Driving assistance " tab.
Check the " Automatic emergency
braking activated " box.
Activation
Confirm. Deactivation
Check the "
Automatic emergency braking
deactivated " box.
The last selection remains in memory when the
ignition is switched off.
If the automatic emergency braking function is
deactivated, following each start a temporary
message will be displayed to signal this, once a
speed threshold (6 mph - 10 km/h) is exceeded.
To deactivate :
- F ollowing an impact to the windscreen
close to the sensor.
-
W
hen towing a trailer.
-
W
hen the vehicle is being towed.
-
W
hen the vehicle is about to cross a toll
payment barrier.
-
W
hen the vehicle is going through an
automatic car wash.
Driving145
208_en_Chap06_conduite_ed01-2016
Stopping the assistance
Switching off the assistance
Press; the indicator lamp comes on.
The state of the system is stored when the
vehicle is switched off.
Resuming assistance
Press again; the indicator lamp goes off.
Advice
Change to neutral. In bad weather or in winter, ensure that the
sensors are not covered with mud, ice or snow.
The system will be deactivated automatically
if a trailer is being towed or if a bicycle carrier
is fitted (vehicle fitted with a towbar or bicycle
carrier recommended by PEUGEOT).If this warning lamp comes on
when reverse gear is engaged,
accompanied by a message and/or
an audible signal, a fault has been
detected.
Contact a PEUGEOT dealer or qualified
workshop. The parking sensor system cannot in
any circumstances replace the need for
vigilance on the part of the driver.
6
Practical information159
208_en_Chap07_informations-pratiques_ed01-2016
Towing a trailer
We recommend the use of genuine
PEUGEOT towbars and their harnesses
that have been tested and approved
from the design stage of your vehicle,
and that the fitting of the towbar is
entrusted to a PEUGEOT dealer or a
qualified workshop.
If the towbar is not fitted by a
PEUGEOT dealer, it must still be
fitted in accordance with the vehicle
manufacturer's instructions.
Your vehicle is primarily designed for
transporting people and luggage, but it may
also be used for towing a trailer.
Driving with a trailer places greater
demands on the towing vehicle and the
driver must take particular care.
For more advice on driving when
towing, refer to the corresponding
section.
For more information on weights (and
the towed loads which apply to your
vehicle) refer to the corresponding
section.
You must observe the maximum trailer
weight, indicated on the registration
certificate or in the technical
specification for your vehicle.
7
Practical information
160
208_en_Chap07_informations-pratiques_ed01-2016
When towing
Distribution of loads
F Distribute the load in the trailer so that the
heaviest items are as close as possible to
the axle and the nose weight approaches the
maximum permitted without exceeding it.
For more information on weights (and the
towed loads which apply to your vehicle) refer
to the corresponding section.
Side wind
F Take into account the increased sensitivity to side wind.
Cooling
Towing a trailer on a slope increases the
temperature of the coolant.
As the fan is electrically controlled, its cooling
capacity is not dependent on the engine speed.
F
I
f the warning lamp and the
STOP warning lamp come on,
stop the vehicle and switch off
the engine as soon as possible.
Braking
Towing a trailer increases the braking distance.
To avoid overheating of the brakes, the use of
engine braking is recommended.
Ty r e s
F Check the tyre pressures of the towing vehicle and of the trailer, observing the
recommended pressures.
Lighting
F Check the electrical lighting and signalling on the trailer and the headlamp beam
height of your vehicle.
For more information on adjusting the
headlamp beam height, refer to the
corresponding section.
The rear parking sensors will be
deactivated automatically if a genuine
PEUGEOT towbar is used.
Air density decreases with altitude, thus reducing
engine per formance. Above 1 000 metres, the
maximum towed load must be reduced by 10
%
for every 1
000 metres of altitude.
F To lower the engine speed, reduce your speed.
The maximum towed load on a long incline
depends on the gradient and the ambient
temperature.
In all cases, keep a check on the coolant
temperature.
Practical information
162
208_en_Chap07_informations-pratiques_ed01-2016
Accessories
A wide range of accessories and genuine parts
is available from the PEUGEOT dealer network.
These accessories and parts are all suitable
for your vehicle and benefit from PEUGEOT's
recommendation and warranty.
Conversion kits
You can obtain an "Enterprise" kit to convert a
trade vehicle to a private car and vice-versa.
"Comfort":
door deflectors, side blinds and rear blind,
cigarette lighter, boot dividers, coat hanger
fixed to head restraint, front centre armrest,
under shelf storage, front and rear parking
sensors...
"Transport solutions":
boot liner with dividers, luggage net, roof bars,
bicycle carrier on roof bars, ski carrier, roof
box...
"Styling":
aluminium gear lever knob, spoiler, styling
strips, alloy wheels, trims, chromed mirror
shells, stickers, interior and exterior mirror
shells, parking brake lever grips, alloy wheel
caps...
"Security":
anti-theft alarm, window engraving, wheel
security bolts, child seats and booster
cushions, breathalyzer, first aid kit, warning
triangle, high visibility jacket, stolen vehicle
tracking system, temporary puncture repair kit,
snow chains, non-slip covers, front foglamps
kit...
"Protection":
mats, seat covers compatible with lateral
airbags, mud flaps, side protection rubbing
strips, bumper protection rubbing strips,
aluminium or PVC door aperture finishers...
To avoid any risk of jamming of the pedals:
-
e
nsure that the mat is positioned and
secured correctly,
-
n
ever fit one mat on top of another.Tow bar, which must be fitted by
PEUGEOT dealer or a qualified
workshop.
The fitting of electrical equipment
or accessories which are not
recommended by PEUGEOT may result
in a failure of your vehicle's electronic
system and excessive electrical
consumption.
Contact a PEUGEOT dealer
for information on the range of
recommended equipment and
accessories.
In the event of a breakdown185
208_en_Chap08_cas-de-panne_ed01-2016
Take care, the sealant product is
harmful if swallowed and causes
irritation to the eyes.
Keep this product out of the reach of
children.
The use-by date is marked on the
cartridge.
After use, do not discard the
cartridge by the roadside, take it to a
PEUGEOT dealer or an authorised
waste disposal site.
Don't forget to obtain a new sealant
cartridge, available from a PEUGEOT
dealer or a qualified workshop. If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a PEUGEOT dealer or a qualified
workshop for assistance.
F
C
heck that the compressor switch is at the
" O " position.
F
U
ncoil fully the electric cable, stowed under
the compressor.
F
C
onnect the compressor's plug to the
vehicle's 12 V socket.
F
S
witch on the ignition. F
S
tart the compressor by placing the switch
at the " I" position and leave it running until
the tyre pressure reaches 2.0 bar.
The sealant product is injected into the tyre
under pressure; do not disconnect the pipe
from the valve during this operation (risk of
splashing and stains).
8