In the event of a breakdown195
208_en_Chap08_cas-de-panne_ed01-2016
Changing a bulb
Front lamps
A. Model with light guide
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
The headlamps have polycarbonate
lenses with a protective coating:
F
d
o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F
u
se a sponge and soapy water or a
pH neutral product,
F
w
hen using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
B. Model without light guide
1. Main beam headlamps (H7-55W).
2. D ipped beam headlamps (H7-55W).
3.
D
aytime running lamps / sidelamps
(light emitting diodes - LEDs).
4.
D
irection indicators (PWY-24W).
5.
F
ront foglamps (directional according
to version) (H11-55W). 1. M
ain beam headlamps (H7-55W).
2. D ipped beam headlamps (H7-55W).
3.
D
aytime running lamps / sidelamps
(W5-5W).
4.
D
irection indicators (PWY-24W).
5.
F
ront foglamps (directional according
to version) (H11-55W).
Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F
D
o not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
8
