2015 Peugeot 208 lock

28
208_en_Chap01_instruments-bord_ed01-2016
Retrieving the service
information
You can access the service information at any
time.
F
P
ress the trip distance recorder reset
button.
T

he service information is displayed for a
few seconds, then disappears.
With the trip mileage displayed, press the
button for a few seconds.
Trip recorder reset
If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least 5 minutes for the reset
to be registered.
Resetting the service indicator
After each service, the service indicator must
be reset to zero.
If you have carried out the service on your
vehicle yourself:
F
s
witch off the ignition,
F

p
ress and hold the trip distance recorder
reset button,
F

s
witch on the ignition; the distance recorder
display begins a countdown,
F

w
hen the display indicates "=0" , release
the button; the spanner disappears.
AdviceFor BlueHDi Diesel versions, this
alert is also accompanied by the fixed
illumination of the Service warning
lamp, when the ignition is switched on.
The distance remaining may be
weighted by the time factor, depending
on the driving conditions.
Therefore, the spanner may also come
on if you have exceeded the period
since the last service, indicated in the
manufacturer's service schedule.
For BlueHDi Diesel versions, the
spanner can also come on early,
according to the degree of deterioration
of the engine oil. The deterioration
of the engine oil depends on the
conditions in which the vehicle is used.
Instruments

Access35
208_en_Chap02_ouvertures_ed01-2016
Remote control
A. Unfolding / Folding.
B. Unlocking.
D

isarming the alarm.
C.


Locking.
L

ocating the vehicle.
A

rming the alarm.
Complete unlocking
Using the key
F Turn to the front.
Using the remote control
F Press.
Selective unlocking
F Press once to unlock the driver's d o o r o n l y.
Using the remote control
This is set in the " Driving
assistance " menu, then " Vehicle
settings " and "Vehicle access ". Unlocking is confirmed by rapid
flashing of the direction indicators for
approximately 2 seconds.
According to version, the electric door
mirrors unfold at the same time as the
first unlocking action.
F
P
ress twice in succession to unlock the
other doors and the boot.
Complete unlocking is activated by default.
In the "Driving assistance" menu
Doors
2

Access37
208_en_Chap02_ouvertures_ed01-2016
F Press.
Using the remote control
Maintaining the locking action (key or remote
control) automatically closes the windows.
Locking - Key
Locking
Using the key
F Turn the key towards the rear of the vehicle.
As a safety measure (passengers on
board), never leave the vehicle, even for
a short period, without taking your key
with you.
Locking is confirmed by fixed
illumination of the direction indicators
for approximately 2 seconds.
According to version, the electric door
mirrors fold at the same time.
The folding and unfolding of the electric
door mirrors can be deactivated by
a PEUGEOT dealer or a qualified
workshop. If one of the doors or the boot is still
open or if an electronic key has been left
inside the vehicle, the locking does not
take place.
When the vehicle is locked, if it
is unlocked inadvertently, it will
automatically lock itself again after about
30 seconds, unless a door is opened.
Folding the key
If you do not press the button, there is a
risk of damaging the remote control.
F

P

ress this button before folding the key.
2

Access
38
208_en_Chap02_ouvertures_ed01-2016
Back-up door locking
For mechanically locking and unlocking the doors in the event of a fault with the central locking
system or a battery failure.
Driver's door
Insert the key in the lock to lock or unlock the
d o o r.
Passenger doors
F On the rear doors, check that the child lock is not on.
F

R
emove the black cap located on the edge
of the door, using the key.
F

I
nsert the key into the aperture without
forcing, then without turning, move the
latch sideways towards the inside of the
d o o r.
F

R
emove the key and refit the cap.

Access39
208_en_Chap02_ouvertures_ed01-2016
Deadlocking
(depending on version)
Deadlocking renders the exterior and
interior door controls inoperative.
It also deactivates the manual central
control button.
Therefore, never leave anyone inside
the vehicle when it is deadlocked.
Using the key
F Turn the key to the rear in the driver's door lock.
F

T
urn the key to the rear again within
5 seconds to deadlock the vehicle.
Using the remote control
Deadlocking is confirmed by fixed
illumination of the direction indicators
for approximately 2 seconds.
Depending on version, the electric door
mirrors fold at the same time. F
Press.
F
P
ress again within 5 seconds to
deadlock the vehicle.
2

Access
40
208_en_Chap02_ouvertures_ed01-2016
From the inside
Locking
Driving with the doors locked may make
access to the passenger compartment
by the emergency services more
difficult in an emergency.
If one of the doors is open, locking of
the doors from the inside does not take
place. When locking / deadlocking from
outside
When the vehicle is locked or
deadlocked from outside, the switch
does not operate.
F
A
fter normal locking, pull the
interior door lever to unlock the
vehicle.
F

A

fter deadlocking, you have to use
the remote control or the key to
unlock the vehicle.
Automatic central locking
The doors can lock automatically while driving
(speed above 6 mph [10 km/h]).
To turn this function on or off (on by default).
F

P

ress the button.
This allows the doors and the boot to be locked.
The indicator lamp in the button comes on.
Unlocking
F Press the button again.
The indicator lamp in the button goes off. F

p
ress and hold the button until
there is an audible signal and/or
a message in the screen.

Access41
208_en_Chap02_ouvertures_ed01-2016
The alarm provides the following types of monitoring:
Alarm
- Exterior perimeter
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet...
- Interior volumetric
The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle. Activation
F

Switch off the ignition and get out of the vehicle.
F Press the locking button on the
remote control.
Timing:
The exterior perimeter monitoring is activated
after a delay of 5 seconds.
The interior volumetric monitoring after a delay
of 45 seconds.
If an opening (door, boot...) is not closed
fully, the vehicle is not locked but the exterior
perimeter monitoring will be activated after a
delay of 45 seconds at the same time as the
interior volumetric monitoring. Automatic activation (depending on
version)
Monitoring is active 2 minutes after the last
door or the boot is closed.
F

T
o avoid triggering the alarm on entering
the vehicle, first press the button on the
remote control before opening a door.
The alarm monitoring system is
active (armed): the indicator lamp in
the button flashes once per second.
- Tilt*
The system monitors changes in the attitude of
the vehicle.
The alarm is triggered if the vehicle is lifted,
moved or damaged.
Self-protection function
The alarm is triggered if the battery, the
central control or the siren wiring is put
out of service or damaged.
For all work on the alarm system, contact a
PEUGEOT dealer or a qualified workshop.
Total protectionDeactivation
* On GTi version. F

P
ress the unlocking button on
the remote control.
The alarm system is switched off
(disarmed): the indicator lamp in the
button goes off.
2

Access
42
208_en_Chap02_ouvertures_ed01-2016
Deactivation of the volumetric monitoring
Tilt monitoring is deactivated, if fitted to your
vehicle.
F
S
witch off the ignition.F

W
ithin ten seconds, press the
button until the indicator lamp is
on continuously.
F

G
et out of the vehicle.
F

P
ress the locking button on the
remote control immediately.
To be effective, the deactivation must
be carried out each time the ignition is
switched off. F

L
ock or deadlock the vehicle using
the key in the driver's door lock.
Locking the vehicle without
activating the alarm
Triggering of the alarm
When the alarm is triggered the siren sounds and
the direction indicators flash for thirty seconds.
The monitoring functions remain active until
the alarm has been triggered eleven times in
succession.
When the vehicle is unlocked using
the remote control, rapid flashing
of the indicator lamp in the button
informs you that the alarm was
triggered during your absence.
When the ignition is switched on, this
flashing stops immediately.
Advice
Remote control fault
To deactivate the monitoring functions:
F U nlock the vehicle using the key in the
driver's door lock.
F

O
pen the door; the alarm is triggered.
F

S
witch on the ignition; the alarm stops. The
indicator lamp in the button goes off.
Alarm fault
When the ignition is switched on, fixed
illumination of the indicator lamp in the button
indicates a fault with the system.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second.
Protection - perimeter
monitoring only
Deactivate the interior volumetric monitoring
(and tilt monitoring, if fitted to your vehicle)
to avoid unwanted triggering of the alarm in
certain cases such as:
-
t
he presence of a pet in the vehicle,
-

a w
indow partially open,
-
w

ashing your vehicle.