2015 Peugeot 208 ad blue

3
208_en_Chap00a_sommaire_ed01-2016
Fuel tank 154
Snow chains 1 58
Towing a trailer

1
59
Energy load

1
61
Accessories


162
Changing a wiper blade
1

64
Fitting roof bars

1
65
Bonnet


167
Checking levels

1
70
Checks
1

73
BlueHDi and AdBlue
® additive 1 74
Straight cut matt paint 1 81
Practical information
Triangle 1 82
Temporary puncture repair kit 1 83
Spare wheel

1
88
Changing a bulb
1

95
Fuses


202
12 V battery

2
08
To w i n g


2 12
Running out of fuel (Diesel)

2
14
In the event of a breakdown
Emergency call 222
Assistance call 2 23
7-inch touch screen

2
25
Audio system / Bluetooth

2
95
Audio system

3
15
Audio equipment and telematics
Alphabetical index Key
Warning
This symbol marks warnings which it is
essential to observe for your own safety,
for the safety of others or to avoid any risk
of damaging your vehicle.
InformationThis symbol draws your attention to
additional information for better use of
your vehicle.
Protection of the environmentThis symbol accompanies advice relating
to protection of the environment.
AdviceThis symbol indicates a reminder of
practical information.
Technical data
General information 2 15
Petrol engines 2 16
Diesel engines
2

17
Dimensions (in mm)

2
18
Identification markings
2

20
Contents

Over view
8
208_en_Chap00b_vue-ensemble_ed01-2016
Touch screen. Heating /
Ventilation.
Hazard warning lamps.
Bluetooth audio system.
Audio system.
Middle console
Central
locking.
Dual-zone automatic
air conditioning.
Centre console
225 -293
2 9 5 - 313315 - 326 59-60
63-65
90 40
Manual air
conditioning.
66- 67
Demisting / Defrosting
(rear screen, mirrors,
windscreen, side
windows). 61- 62

Over view
10
208_en_Chap00b_vue-ensemble_ed01-2016
Underbonnet view
Identification markings 2 20
Dimensions 218 -219
Changing bulbs
1

95-201
-

front
-

rear Running out of fuel, Diesel

2

14
Opening the bonnet
1
67
Under the bonnet, petrol

1

68
Under the bonnet, Diesel

1

69
Petrol engines

2

15 -216
Diesel engines

2

15, 217 12V battery

2
08 -211
Load reduction, economy mode
1
61
Engine compartment fuses
20
2-203, 207
Dashboard fuses
2
02-206
Petrol weights
2
15 -216
Diesel weights
2
15, 217
AdBlue
® additive 1
74-180
Checking l eve l s
8

9, 16 8 -172 , 178 -179
-

oil
-

b

rake fluid
-


coolant
-

s

creenwash fluid
-

a

dditive (HDi Diesel AdBlue
®)
Checks and maintenance 1
68-169, 173
-

a

ir filter
-

o

il, oil filter
-

p

article filter (Diesel)
-

b

rake fluid
-

b

rake pads / discs

20
208_en_Chap01_instruments-bord_ed01-2016
Warning or indicator lamp
in the instrument panelState
Cause Action
/ Observations
AdBlue
® additive
(BlueHDi Diesel) fixed, on switching
on the ignition,
accompanied by an
audible signal and a
message indicating the
remaining driving range. The remaining driving range is
between 350 miles (600 km) and
1500 miles (2400 km).
Have the AdBlue® additive tank topped up as soon
as possible: go to a PEUGEOT dealer or a qualified
workshop, or carry out this operation yourself.
flashing, accompanied
by an audible signal
and a message
indicating the
remaining driving
range. The remaining driving range is
between 0 and 350 miles (600 km).
You must top-up the AdBlue
® additive tank to avoid
a breakdown : go to a PEUGEOT dealer or a qualified
workshop, or carry out this operation yourself.
flashing, accompanied
by an audible signal
and a message
indicating that starting
is prevented. The AdBlue
® tank is empty: the
starting inhibition system required
by legislation prevents starting of the
engine. To be able to start the engine, you must top-up the
AdBlue® additive tank: go to a PEUGEOT dealer
or a qualified workshop, or carry out this operation
yourself.
It is essential to add at least 3.8 litres of AdBlue
® to
the additive tank.
For topping-up or for more information on the AdBlue
® additive, refer to the corresponding section.
Instruments

21
208_en_Chap01_instruments-bord_ed01-2016
Warning or indicator lamp
in the instrument panelState
Cause Action
/ Observations
+
+ SCR emissions
control system

(BlueHDi Diesel) fixed, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a message. A fault with the SCR emissions
control system has been detected.
This alert disappears once the exhaust emissions
return to normal levels.
flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied by
an audible signal and
a message indicating
the remaining driving
range. After confirmation of the fault with the
emissions control system, you can
drive for up to 650 miles (1 100 km)
before the engine starting inhibition
system is triggered.
Contact a PEUGEOT dealer or a qualified workshop
without delay
, to avoid a breakdown .
flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a message. You have exceeded the authorised
driving limit following confirmation
of a fault with the emissions control
system: the engine starting inhibition
system prevents starting of the
engine.
To be able to start the engine, you must
call on a
PEUGEOT dealer or a qualified workshop.
1
Instruments

26
208_en_Chap01_instruments-bord_ed01-2016
Servicing
The vehicle's odometer is displayed in area A
of the display screen and the trip recorder in
area B. -
i t remains displayed if the service is
overdue,
The service indicator does not appear if it is
more than 2 000 miles (3 000 km) before the
next service is due.
For BlueHDi Diesel versions only
(depending on the country of sale), the
degree of deterioration of the engine oil
is also taken into account.
This is a countdown between the intervals
given in the manufacturer's service schedule.
It is calculated from the last reset of
the service indicator, according to the
mileage covered and the time elapsed
since the last service. The service indicator appears when
approaching a servicing point:
-

i
t indicates the distance before the next
service is due,
-

i
t displays the servicing interval in
two


ways,
Instruments

28
208_en_Chap01_instruments-bord_ed01-2016
Retrieving the service
information
You can access the service information at any
time.
F
P
ress the trip distance recorder reset
button.
T

he service information is displayed for a
few seconds, then disappears.
With the trip mileage displayed, press the
button for a few seconds.
Trip recorder reset
If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least 5 minutes for the reset
to be registered.
Resetting the service indicator
After each service, the service indicator must
be reset to zero.
If you have carried out the service on your
vehicle yourself:
F
s
witch off the ignition,
F

p
ress and hold the trip distance recorder
reset button,
F

s
witch on the ignition; the distance recorder
display begins a countdown,
F

w
hen the display indicates "=0" , release
the button; the spanner disappears.
AdviceFor BlueHDi Diesel versions, this
alert is also accompanied by the fixed
illumination of the Service warning
lamp, when the ignition is switched on.
The distance remaining may be
weighted by the time factor, depending
on the driving conditions.
Therefore, the spanner may also come
on if you have exceeded the period
since the last service, indicated in the
manufacturer's service schedule.
For BlueHDi Diesel versions, the
spanner can also come on early,
according to the degree of deterioration
of the engine oil. The deterioration
of the engine oil depends on the
conditions in which the vehicle is used.
Instruments

Ease of use and comfort59
208_en_Chap03_ergonomie-confort_ed01-2016
Temperature
F Turn the knob from blue (cold) to red (hot) to adjust the
temperature to your wishes.
Air flow
F Turn the knob from position 1 to position 6 , to obtain the desired
air f low. If you place the air flow control at
position 0 (off), the temperature in the
vehicle will no longer be maintained.
However, a slight flow of air can still be
felt due to the movement of the vehicle.
Heating / Ventilation
Manual mode
3